just did this before my exam tomorrow if it’s anywhere near as hard as this paper i’m gonna cry

@pinkmangooooo

11 күн бұрын

Felt

I found this paper probably the hardest past paper ive done. Stats questions were dreadful

im begging , please do more statistics . your my only hope . mechanics is calm . statistics is causing me several issues

@dutz9157

Жыл бұрын

bro stats is a lot easier

@studiostrawberry8246

Жыл бұрын

@@dutz9157 ikr it's just plugging the numbers in, it's mechanics that can get more tricky

@Yasser-hy8tn

Жыл бұрын

Its the complete opposite for me

@MrAstburyMaths

Жыл бұрын

Just posted another paper 👍

Thank you so much for this! I was just looking to see if you had any more applied past papers. :)

@MrAstburyMaths

Жыл бұрын

I have now done all 5 past applied papers 2018 to 2022 on my channel

bro your a life saver....

this was so helpful :) thank you

@MrAstburyMaths

11 күн бұрын

Glad it was helpful!

Mechanics is my fav!!!!!!

the goat strikes again, if it werent for you my pure 2 wouldn't have been as good as it was. keep up the good work, are you planning to release any more stats / mech content?

Cracked up at the Patrick van aanholt, funny and great video

@RandomEpicStuffSubscribe

Жыл бұрын

What's the timestamp for it?

Can you make predicate A level and statics and mechanics Papers 2023

Thank you so much for posting this for free you are truly a good guy 🙏

@MrAstburyMaths

Жыл бұрын

You are very welcome

Sir if it’s possible could you please make a video on how to approach kinematics? 80% of the time so have no clue what to do but when i see solutions it makes sense. I just would like to know how people recognise what to do

@Chakamatics

3 ай бұрын

Find components of every force and resolve

@jennaaa-21

Ай бұрын

@@Chakamatics they asked about kinematics

@Chakamatics

Ай бұрын

@@jennaaa-21 🤦‍♂️ yh u right bro, I didn't see that

Thank you so much you’re amazing!

@MrAstburyMaths

Жыл бұрын

You're so welcome!

please do more mechanics, statistics is fine. But hard projectile/moments/forces on slopes would be great thanks

bro, pls go ham for Paper 3 uploads

@MrAstburyMaths

Жыл бұрын

I plan to 😀

do you have any tricky projectiles questions? if you could do a video going through one that would be great!! thanks!!

Wow Patrick Van Aanholt is a name I haven't heard in years haha that should help me remember the order. Great video as always, thank you

@MrAstburyMaths

Жыл бұрын

Thanks for watching! Glad it was helpful. PVA 😍

great video, was wondering if you could go back to the old calcultor if you do another

@MrAstburyMaths

Жыл бұрын

I’m planning on doing a calculator tips video. I’ll be sure to use both calculators for that 👍

the goat

ayy lets go time to smash paper 3

it has been requested here but ill say it too because it would be very useful, is there any possibility you could compile a predicted paper for stats and mechanics?

@MrAstburyMaths

Жыл бұрын

Thanks for the suggestion. I’m not sure what credible predictions I could make for paper 3. I think the best plan is to work through as many past papers as you can. That’s why I’ll be posting 2019 soon along with a Madas paper. You can find the other years’ papers on my channel

how would you know when to say “given that” for those type of questions?

Stats is honestly ridiculous. Would rather do a further mechanics module over a level stats.

Hi Sir would it be possible to get a video for most useful tips on the Casio fx-CG50 similar to the one you did for pure? It was really helpful

@MrAstburyMaths

Жыл бұрын

It’s landed, just in time 😀 kzread.info/dash/bejne/p2d2x7GRmKXTZqg.html

Hi sir at 35:44 how do you know when to plug in the value into the upper and lower brackets?

if i met you in real life it would passionately kiss you on the lips

Will you be posting predicted paper 3?

can u please explain what you did on part d of the last question? got a little confused

i thought in the statistic part 5c we needed times by 2 considering the different arrangement

guys i know hes writng in the margins under the questions but my teacher told me examiners hate that and might not even give you marks. so just to be safe I would recommened only writing on the lined paper

where does the very last equation come from 20=18.26*cos(14.03)*t ??

what should i focus on when i revise for applied

If I don’t know the large data set and my exam is in a week, is it useless to learn it now?

Hey sir for qu3d in stats, how come you can’t set p (0) = 0.01 + (11-1)(alpha) then solve for alpha? I would assume this would work because I am using F=11 where I know the P(F=11) is 0 because Thomas assumes the child won’t need more than 10 throws?

Please could you make a video on some difficult question types from Madas?

@MrAstburyMaths

Жыл бұрын

Trying to. Pushed for time before paper 3!

how do u get the casio calculator emulator for ipad

For the batterie question with the new batteries how come u dont times the probability by 4 choose 2 as there are 4 ways it could be arranged like Old Old New New ect

goat

is question 9 mech, r2 the friction force?

Is there any way to input an upper and lower number on the Casio fx-991EX? At 12:26 I'm only able to input an x, N and p value

@TB-ls7py

Жыл бұрын

Im confused as well

@Unknown_Zain

Жыл бұрын

input the values, x=3, N=10, p=0.1, then do 1 minus the answer and you should get 0.0128.

why in Q3 is there arithmetic series, isn't that pure only?

@MrAstburyMaths

Ай бұрын

They can put pure topics in the applied papers. Last year there was integration in the Stats paper!

@bellasophiex7846

Ай бұрын

@@MrAstburyMaths thank you! That should be illegal

why is there two reactions forces on Q9 at A. Also wouldn't there be friction if its a rough vertical wall

@josemourinho6964

11 күн бұрын

@MrAstbury

doesn't play for palace anymore but still remains relevant due to mechanics lol

@MrAstburyMaths

Жыл бұрын

The streets won’t forget

Can someone explain why, at 1:10:20 , the rope breaks at its current form? Surely since x=2a/3, it wont break since 2a/3 is less than 5a/3

@rioffline

Жыл бұрын

The rope doesn’t break though

Why is there no reaction force at P in question 9?

@MrAstburyMaths

Жыл бұрын

Reaction forces come from surfaces, such as the floor or a wall or a slope.

Why do outliers affect the mean and standard deviation but not the median and IQR

@MrAstburyMaths

2 ай бұрын

The mean and SD are found but by adding up all the data so outliers are included. The median is the middle value and the IQR uses the middle 50% of the data. Thus outliers don’t affect their values

@isxxc123

2 ай бұрын

@@MrAstburyMaths ohh thanks for that very helpful

18:40, should it not be 4 people per minute, as its only a 10 minute window that he is sampling?

@db5094

13 күн бұрын

no

@louiss2086

12 күн бұрын

@@db5094 bro became wiser

for my binomial cd only x n and p value

@Unknown_Zain

Жыл бұрын

input the values, x=3, N=10, p=0.1, then do 1 minus the answer and you should get 0.0128.

A level mechanics is very easy to predict. A level stats anything can be thrown at you

@MrAstburyMaths

Жыл бұрын

I agree, Stats can throw up some funky questions!

@db5094

Жыл бұрын

@@bradleyjeffs1633 I think what they mean is, theres not too many questions they can ask you. There will almost always be a sloped question. There will almost always be a kinematics question and a rod question. Its just practice, statistics on the other hand who knows

no one likes stats

1:05:43 for (c), from the start of (b) we have found that T = (5/2)Mg, so it is optimal to use that in calculating R1. R1 + (5/2)Mg*sin(alpha) = 4Mg, recall sin(alpha) = 3/5, so (5/2)Mg*(3/5) = (3/2)Mg, => R1 + (3/2)Mg = 4Mg => R1 = 4Mg - (3/2)Mg = (5/2)Mg.

Hey sir for qu3d in stats, how come you can’t set p (0) = 0.01 + (11-1)(alpha) then solve for alpha? I would assume this would work because I am using F=11 where I know the P(F=11) is 0 because Thomas assumes the child won’t need more than 10 throws?