Either this guy is rubber man or he can extend his joints beyond belief. It was hell trying to get that nut off at the firewall.

I pre-ordered it from roush when they released it a few weeks before, installation was pretty easy, though the instructions provided have a few things needs tweaking, things like they totally used the wrong picture to point out which clips on the sensor line needs to be removed to make it reachable to the new location. Also, I suggest anyone who's planning on eventually selling the car leave the engine cover off, since I heard that part is not cheap, it also looks better without the cover imo :D.

Thanks! You have just talked me into letting the dealer do this for me! My dealer is a Rouch dealer and I’m sure they can handle it for me LOL I Will have my H pipe and this done both at the same time!I used to be pretty mechanically inclined but I just can’t be bothered anymore.

Can't wait to install this on mine!

Thank you for the video, just did mine!

I refer to the 18+ GT engine cover as the 'manta ray'...

Man these videos are so helpful. I love this KZread channel 💯

Bill, great videos for us weekend mechanics. Noticed you don't use fender protectors, wouldn't this be an opportunity to show and market another product while protecting the car?

Can't wait for my 2018 Mustang doing a lot of mods !

@umairejaz6665

3 жыл бұрын

Did you install this and do you recommend? Heard they run hotter than stock closed box do you agree?

I like that the 2018 kit is covered. Looks like the cover would fit a 2015-2017 Roush CAI kit, too.

Thank you! That really helped!!!

@cjponyparts

Жыл бұрын

Glad it helped!

It would be nice to have before and after dyno numbers on these products. Roush calms a 10 HP gain on this system, but did not say it was with or without the insert and / or a tune with the insert out.

@ericpugh247

6 жыл бұрын

DeadMansHand 13 that's without a tune. With a tune would be in the 30

Mr. Bill hav a question does the assembly connecting to the inlet pipe need to be air tight thur the dox. The tube doesn't fix snug and has a gap so wondering if thts a problem meaning sucking hot air from the engine rather the cold air intake..? Thank you for ANY help, TC oh also coming off a Roush phase 2 SC

Whats the maf size with the insert and without the insert?

Installed, then just couple days later my check engine light is now, not sure if coincidence or has something to do with the cai

Is the cover over the airbox required? I personally don't like the look of it, but does it protect the intake from sucking in rain?

Serious question what’s the point In buying this intake if it’s not tune does it make any difference in power or is it just for looks?

Why is the 2015- 2017 version have an open box and the 2018 is closed.

You should install engine stut bar and bigger sway bars.

What is the meaning of insert im trying to order a tune but its a askinh for if whether i have a insert or Not in my intake

Bill great work. I'd just go without the cover though. It just looks too makeshift after getting cut.

@cjponyparts

6 жыл бұрын

I would agree it looks cleaner without it.

@Theuniverseisstrange

4 жыл бұрын

The template they give you cuts off too much material... better to custom cut it yourself for a better fit.

@soulja4187

3 жыл бұрын

@@Theuniverseisstrange or add some spacers to where the cover bolts on so it raise it a bit and you don’t need to cut it

@Theuniverseisstrange

3 жыл бұрын

@@soulja4187 I decided not to cut mine and went right over it with no spacers needed lol. Looks great.

@soulja4187

3 жыл бұрын

@@Theuniverseisstrange good feedback

I think a dremel would make a better cut on the engine cover.

Need help, bought that, didn't come with the template, any suggestions?

That color car is easily the most beautiful I have ever seen. But I still cant wrap my head around they still have the sound tube and the hood stick.

@techmaster777

5 жыл бұрын

MrMrwilson11 what does the sound tube do

@thedude2897

4 жыл бұрын

@@techmaster777 It takes sound from the stock intake into the dash/cabin. Exhaust sounds are more throughout the car. Without it the inside is more quiet, but you hear the exhaust from the outside more. Most people remove the sound tube. Some say they can't tell a difference with it off. I do, but it's not a huge difference.

If I install the CAI with the insert and do an X pipe resonator delete, will this combo create an engine running lean ? Also sounds like a win-win if Ford will still back the warranty with them tuning. What you guy's think ?

The template provided in the kit left alot to be desired after it was cut

Hey Bill. Quick question, does it work for RHD Mustangs?

@dr3wster

6 жыл бұрын

A bit late, but I just installed this yesterday on my UK RHD 2018 GT. It installed perfectly with no issues.

What does he mean you can remove the insert for custom tuning?

IMPORTANT: Does this fit on 2015 gt mustang? Especially that I can’t find airbox lid for roush intake on 2015 mustang GT. I need the airbox lid so bad for 2015 roush intake any tips?

@cjponyparts

5 жыл бұрын

NO the intake is completely different, there was no sealed box for the 15.

Since it’s an aftermarket intake would the check engine light come on ?

@soulja4187

3 жыл бұрын

Not if you keep the sleeve insert. If you remove the insert than more air would come into the engine and you will get a check engine light. The only time to remove the insert is when you get a tune

Is there a trim piece that could go over the cut edge on the cover, that looks a little Mickey moused to me. Doing a hatchet job to the cover of my $50000.00 car seems unlikely. Other than that it looks great.

@Theuniverseisstrange

4 жыл бұрын

I’ve seen installs where you don’t have to cut it. Looks better

@habanero5.054

4 жыл бұрын

I think I’m going to buy a spare engine cover😂

@bananacoon2986

3 жыл бұрын

Lol just take off ur cover and get a strut tower brace

toughest thing to do on install,was remove sound tube nut on firewall..Ugh..hint invest in a 10 mm flexhead ratchet wrench

Roush, but will the tune void Ford warranty. Don't much care for the cover; especially after being cut. Its not your workshop Bill, it's the cover =). As usual good video. I'm still wanting Ford Performance to have one out for 2018.

@cjponyparts

6 жыл бұрын

Roush and FRPP will both offer cold air/tune combos that will retain the warranty.

@raydog1111

6 жыл бұрын

The day that happens, my engine cover will decorate my storage closet door instead of starring in the next Saw sequel. Whoever makes the first KZread vid can take my $$$. Holla!

Just installed this in my 21 mustang and it feels like it loss a little bit of power not as responsive as before not sure why? Should I get a tune for it ?

@gabrielgabrielgabrielgabriel46

2 жыл бұрын

Standard one’s really good one. To make it better you can’t just add more air. Remove filter = another extra air portion but it propably will effect cel. Standard ecu maps can’t adjust so much - you need to buy ready tune from roush or go for a dyno and have individual tune done. A lot of air in n/a in low rpm isn’t something that makes engine „stronger”. Look at BMW intakes - they’re best one you can imagine for a daily coz they have disa valves that change intake lenght (intake’s not moving - it changes air routes inside it) coz in low/mid rpm it’s better to have longer intake (slower air supplying). Car that makes great hp/torque in high rpm but in low/mid goes like shit makes overall shitty expierence in a daily use. Same with your car - adding extra 10hp and some torque in 6500 rpm but losing 20hp and a torque in 2000 rpm makes overall experience that car’s slower.

How much HP could you gain?

Hi guys from CJ pony parts I have this same air filter on my car but the previous owner lost one of the screws what size screw and what type should I buy to replace it? Thank you

@gradedcards7599

Жыл бұрын

Which screw? For the cover, or filter?

@traviscole9761

Жыл бұрын

@@gradedcards7599 cover I know they are T20s but I think the guy before me put T30s instead

Will this intake void my factory warranty?

@thedude2897

4 жыл бұрын

Only if you tune it.

@rexr3306

4 жыл бұрын

If you tune it or if the manufacturer can prove that a problem was caused by the part otherwise no it wont

2020 mustang gt convertible logging p061b Torque calculation code After installation of this cold air intake. Had to remove the inner insert where the mass air sensor is to make it run. Seems to be good now. Is this normal?

@akshayksingh11

5 күн бұрын

I just got a P061B code on mine rn. I think sound tube needs to be removed?

Question... why do you have to remove the sound tube? Or whatever that is.

@cjponyparts

2 жыл бұрын

You can leave it if you want but it looks cleaner without it since it isn't doing anything.

Which one is better ,open air box or closed air box ?

@panchobilla6928

5 жыл бұрын

John Smith closed

@coyote5.046

Жыл бұрын

Closed so you don’t soak up heat

Does this work with the 2022 mustang gt even though the 22 model has a different engine calibration than previous years?

@juanito3.5

2 жыл бұрын

It fits. 2022 model has 10 hp less. Not a deal breaker imo. I own a 2022 myself

@andrezinho7n

Жыл бұрын

Did you end up getting it?

Whats with people saying these are warranty backed? I thought ford wouldnt back any tune

@cjponyparts

5 жыл бұрын

This cold air kit does not require a tune.

Can this modification benefit from a tune?

@habanero5.054

4 жыл бұрын

It would greatly benefit from a tune but you’d void your warranty

Is it okay to leave the engine cover off

@sickactor

Жыл бұрын

Yes, he mentioned its optional if you want to keep it on or off.

I've seen reviews that if you dont tune it then the car loses power and wont run right..is that true? Or can I just install it and not worry about anything? Please get back asap! Thanks!!

@cjponyparts

5 жыл бұрын

We installed this without a tune and it runs fine. A tune will help but there is no problem with installing this without one.

@ojosdelaccer

5 жыл бұрын

the truth that if the car loses strength, very disappointed of the product

@thedude2897

4 жыл бұрын

Only if you get heat soaking will you lose power up front.

I'm guessing this would need a tune? Am I first?

@sirnate54

6 жыл бұрын

Jimmy Wilson No.

@jameswhite8453

6 жыл бұрын

With the provided insert there is no need for a tune. Limits performance gains as well. Little gain without tune for any CAI; unless I'm mistaken.

Is the tune worth it???

@cjponyparts

5 жыл бұрын

If you have other supporting mods and you're looking for more power, yes it's worth it.

What is wrong with the factory intake?

@Travios1115

6 жыл бұрын

Its factory....

@panchobilla6928

5 жыл бұрын

Nothing I think people are just stupid love to get robe 🤣😹😂😭

@MikeDawson1

5 жыл бұрын

I'm trying to figure out the same thing

Is there anyone out there that has installed this on a 23 and can confirm it fits without any issues. Roush is telling me that it is not made for a 23 GT

@SEXC_MIKE

Жыл бұрын

I'm trying to figure this out too. I also am trying to buy the 87mm throttle body with the adapter but I'm not sure if this intake will mount up to those parts with no issues. I've checked the forums and reddit and still no answer

@chrisw.7039

Жыл бұрын

@@SEXC_MIKE That's the only downside to buying a new model at the beginning of the year. Non of the parts for the previous year have been approved for the new model even though nothing may have changed.

Has anyone gotten a wrench symbol after installing this with no tune. How to fix this?

@coyote5.046

Жыл бұрын

Yes I did on mine remove the insert from the roush inlet tube I had the same issue it said powertrain failure so I put the factory back on everything was good so this time around I took the insert out works like a charm and no tune

Why would you cut into the engine cover when you have to remove it to install the cold air intake? Just keep if off. Lol

@blckstang6363

3 жыл бұрын

The covers there for a reason mate

@aggee10

3 жыл бұрын

@@blckstang6363 please explain what reason that is?

@soulja4187

3 жыл бұрын

@@blckstang6363 to dampen sound which is the only thing. The bullit or the Mach 1 do not have it so technically is useless

Why a cover now? My Roush kit for my 2017 does not have a cover. I thought the whole entire reason for the intake to be wide open was to draw in more cold air? What gives?

@Gltokensp06

4 жыл бұрын

Heat soak. Open air CAIs tend to heat soak from engine heat and the IATs tend to go up. You actually end up losing power cause the car will start to pull timing when the IATs are higher since the air won't be as dense.

i install my and the check engine go on why?

@orangefurry3154

Жыл бұрын

You might need to rest the computer

Anyone drive with the box cover removed?

@cjponyparts

11 ай бұрын

I removed the lid off mine on the dyno and it didn't make any difference. When the hood is closed it practically seals it off anyway.

no computers reset required?

@cjponyparts

Жыл бұрын

The Roush cold air kit requires no tuning, so no changes to the computer are required.

Just checked the Roush site on this part and it does not list any Horse Power gains at all. So you would be spending over 400 sucker bucks, for nothing but the Roush name. Just drop in a K&N filter and save yourselves 350 bucks, and you won't have to cut up the intake cover.

@adrianvindas3090

6 жыл бұрын

I totally agree. Adding a CAI does not improve any gains. It's just for looks.

@tedjones-ho2zk

6 жыл бұрын

Also with the CAI you have to cut the engine cover also if its installed, it's just a bad idea all around.

@mpaacslaps

6 жыл бұрын

CAI are all for looks unless you get it with a tune or plan on getting a tune down the line

@tonypalafox6758

6 жыл бұрын

I just installed it on 18 mustang gt and you could feel a little more gains. I imagine with a tuner will be better

@tedjones-ho2zk

6 жыл бұрын

I bet if you just installed a K&N filter in the stock air box you may have had the same result for a lot less money

what is the power gain on this intake?

@adrianvindas3090

6 жыл бұрын

Daniel Fuller none

@Demoney39

6 жыл бұрын

adrian vindas wtf is the sense then lol

@tonypalafox6758

6 жыл бұрын

Daniel Fuller there is gains I just installed it on the 18 mustang gt and you cold feel more response with it. I could imagine with the tuner is gonna be better.

@Demoney39

6 жыл бұрын

how much tho cause for 10 hp its not worth it without a tune and by the time you buy a tune as well its going to be close to 900 bucks after all said and done you might as well save that money and use it on something thats giving more power!!!

@tonypalafox6758

6 жыл бұрын

Daniel Fuller is around 15 of gains and then later on I'll add something else and that will help more

Never been a fan of air intake kits with the windowed top lid...

That was a hatchet job on that cover.

That cut up cover looks horrible

@TicklerDude

4 жыл бұрын

The engine cover is meaningless. Keep it on or remove it. Nobody cares.

that engine cover is the worst thing ford could have done to the coyote.

@shaunfleming5141

6 жыл бұрын

Sure is! I have an '18, only thing I'm disappointed about!

@rolexr

5 жыл бұрын

@@shaunfleming5141 ...have modified mine 3 days ago - so it looks a bit better: kzread.info/dash/bejne/mnubxrOLnpCZgZs.html

Love the video but for God's sake lose that crappy electronic music.

that engine cover is so ugly. especially once you cut it. I took it right off. Ford had the right idea with the bullit. To go from the 13-14 and 15-17 engine cover to whatever that is, was a real misfire by Ford.

@cjponyparts

4 жыл бұрын

I agree it’s on the ugly side. They tried to hide all the DI stuff but missed the mark a bit

That’s shit! Who wants to cut up their new car