Nice setup looks like a good bike got left a YZ250 it's a classic.

Nice bikes man, I want soooo bad!!

A jd red needle on clip 2 is gold.

Nice bikes!

do you have a video on how you put the computer into the bar pad? I'm interested in doing the same.

nice yz's and garage!

@bwhipmoto8258

7 жыл бұрын

Thanks

thanks, the bike's only have one ride so far to much snow. I made the computer mount, I will be posting a how to video hopefully this weekend.

Motoz extreme hybrid and tubliss for Traction control !!!!

I will be doing a video on the computer install soon.

@20043670

4 жыл бұрын

Please do!!!

How many miles can you go with a full tank on the stock YZ250 for on the modified one with the bigger tank

my riding buddy is about your hight and weight and rides the other 250x. no issues​ with lack of power or anything.

Hey I just got the acerbis tank as well, I like your petcock setup rather than that little plastic Y piece (actually broke on me so I had to rig something else real quick), you by chance have a little part list or something you did to do that?

Wow they look really clean, like to clean.

@bwhipmoto8258

3 жыл бұрын

Bikes were pretty fresh in this video 😎

I got a 2020 yz250x and my elevation is about 4500 FEET above sea level. What do you think i should go with jetting? Dont really know much about jetting.

Your bike is clean looking. i also have a yz250x but I'm running the ims 3.2 tank & wider pegs and a whole lot more other mods but where did you find that bar pad GPS setup like that? and love the rear brake snake that's pretty cool never thought of that. I did a light weigh foam between the skid plate and engine to try and keep some vibrations down.

@ZSharkPH

7 жыл бұрын

Aubrey Sweatt curious if your happy with the IMS tank over Acerbis and why?

stock gearing is 14/50. or atleast in the USA it is. i have found that 14/51 is best for eastern hare scrambles. But you need a longer chain to run that gearing. I think a 13 front wears out the chain slider too fast. I love my X, excellent do all bike.

@bwhipmoto8258

7 жыл бұрын

d nelson yes you are correct 14/50 stock gearing, noticed that after published video. these are great do all bikes really enjoying the light feel compared to my old 450.

@nancyblanchard9175

5 жыл бұрын

I put a 15 tooth on front and now 1st is very usable in the nasty stuff

@Mitch.Engel84

5 жыл бұрын

Nancy Blanchard gearing it higher made it better in the nasty stuff? I geared it lower (by swapping the 14 tooth front sprocket to a 13 tooth) and it made it much easier to use first gear in the nasty stuff.

How big is that tank and how many miles do you get out of it

一箱油可以跑多少公里？

about how many miles can you go before refueling?

How much am I expecting to paid out the door for these bikes?

Anything I can do to smoothen out the powerband and make it more linear? Just got this bike and want to make it easier to ride!

@kichaa13

4 жыл бұрын

G2 Throttle Tamer? Take a washer out of the power valve spring I hear as well.

Nice bikes. I’ve got one also and me and a whole bunch of other people have cracked cylinders between exhaust ports. Think maybe they are made in China now!

What mixing oil do you like yo use and at what ratio. Ive been using yamalube r at 32 to 1.

@bwhipmoto8258

5 жыл бұрын

i like Klotz R-50 @ 40:1

@nancyblanchard9175

5 жыл бұрын

I'm running Yamalube 2r @ 42:1 and it's all good. At anything more I was fouling plugs and was gonna change the Jets but my dealer said it was set up for sea level which I'm at.

Can you do a video on the trail tech install?

@bwhipmoto8258

6 жыл бұрын

i am just running off of the cr2032 battery. i have a short video on the computer ( trail tech) mounting on my page. the most time consuming part is the caliper bracket reciever placement which will differ from bike to bike, just make sure it is flat and does not make contact to the magnet on the rotor. hope this helps.

Gearing is 14F 50R

So if you have a standard yz250, can you just set it up to the same settings as the 250x, or is the x already designed in a way that cant be replicated?

@kichaa13

4 жыл бұрын

It can be replicated, you need to revalve the suspension and change all the engine parts that are different.

@lenghtofpull

3 жыл бұрын

They are the same yet different, the X has lower compression, softer suspension, wide ratio trans, 18inch rear wheel, different exhaust port timing, different CDI box, side stand, skinner expansion chamber,softer clutch springs

Look up JD jetting, it's a company based out of Washington state. They make carb needles that make the power pull really hard bottom to top. And it tames down the hit. Their needles also allow you to run a leaner pilot for woods riding. None of the OEM needles even come close to JD'S

@250race

5 жыл бұрын

DJ jetting copie the stock cr250 2004 to 2007 needle I have both stock and DJ Stock is $12 from Honda

@brianmorrison9066

4 жыл бұрын

They have 125 needles and 250 needle s, red and blue each.

What's your hight and weight? I'm looking to get a Yz250x and am 6,1 and 210...will it pull me around good?

@bwhipmoto8258

7 жыл бұрын

Mike Brown my current # is 155. and currently running a 13/49 gearing. with this setup it is too slow for dessert. stock is fine, bike has plenty of power. I'm looking for the perfect gearing setup​ for dessert and single track mountain. I will now try 14/51, Wich will require new chain. I ran this ratio on my last bike (2009 yz450f) love'd that bike. should have (road) yz250x before gear change but was in the mood. will have a ride update​ soon.

@bwhipmoto8258

7 жыл бұрын

Egbert Wadman did​ you do any jetting, what's your altatude and temp.​

U think I will fit on a 1999 atk 260 iq

Why did you get that tank and not the newer style acerbis? Pretty sure the new one don't have that ugly ass spout lol

@flagovhate

6 жыл бұрын

Just kidding idk what I'm talking about lol

@jingelsby

2 жыл бұрын

The spout sticking up is HIDEOUS!! Like a Pinnochio Nose