2017 F250 6.7 DPF DELETE

How to remove and replace the diesel particulate filter (DPF) on a 17+ Ford 6.7 PowerStroke F250-350.

Пікірлер: 159

  • @TreeGirlDesigns
    @TreeGirlDesigns2 жыл бұрын

    I’m just a simple girl but i can’t thank you enough for this tutorial! I have the exact same truck and had already heard about increased gas mileage and better performance without that stupid def pipe. This just gave me the confidence to eliminate mine too. Thank you so very much for making such an incredible descriptive video!

  • @jlra5734

    @jlra5734

    10 ай бұрын

    did you have to tune it?

  • @Unit_450

    @Unit_450

    2 ай бұрын

    @@jlra5734 always. These trucks have a very sensetive ECM and the emissions system/sensors need to be de-learned from the ecm

  • @mattzamaites
    @mattzamaites2 жыл бұрын

    I was struggling to find a decent quality video that does this, and yours nailed it. Thank you!

  • @dothechickenshavelargetalons69
    @dothechickenshavelargetalons692 жыл бұрын

    Thank you for taking the time to make this video, very straightforward and well explained

  • @anthonyjohnson2316
    @anthonyjohnson23163 жыл бұрын

    My kit arrives tomorrow. This was a great video. Very informative.

  • @woodysworkshop816

    @woodysworkshop816

    3 жыл бұрын

    Thanks for watching! Hope it helps you out.

  • @garybesaw3809
    @garybesaw3809 Жыл бұрын

    Best how to video I’ve seen in a while. Thanks for the information and direction!

  • @Victorbanda1234
    @Victorbanda12343 жыл бұрын

    Both this video and the egr video helped me out a lot. Didn’t run into any real issues. My stock egt probe was extremely tight inside the crossover pipe and some of my connectors were a little tricky.

  • @woodysworkshop816

    @woodysworkshop816

    3 жыл бұрын

    Glad it helped, thanks for watching!

  • @travissmith5303
    @travissmith53032 жыл бұрын

    Thanks for the great video. I just pulled my DPF and watched your video the entire way.

  • @heathcantrell3870
    @heathcantrell38703 жыл бұрын

    Did my truck today. Your video was extremely helpful. Thanks for the awesome guidance.

  • @woodysworkshop816

    @woodysworkshop816

    3 жыл бұрын

    Thanks for watching, glad it was helpful!

  • @travishackney3194

    @travishackney3194

    3 жыл бұрын

    I have a 2012 trying to do where can I get a tuner and kit

  • @edgargeg100

    @edgargeg100

    2 жыл бұрын

    Did you get the check engine ligth on?

  • @heathcantrell3870

    @heathcantrell3870

    2 жыл бұрын

    @@edgargeg100 Nope, no light here. The tuning should take care of that.

  • @ethanhoullahan5423
    @ethanhoullahan54233 жыл бұрын

    Loved the video. Thanks for going so in depth on the removal of the dpf. I haven’t been able to find anything like this on the 2017+ 6.7 Powerstrokes. Quick question though. Do you have to load the new delete tunes into the truck prior to actually removing any of the parts or can you load them after? I’ve heard some people say you have to tune the truck before or the computer will know and basically put it into limp mode. Just wanted to clarify.

  • @barbatostfechosix8176
    @barbatostfechosix8176 Жыл бұрын

    Thanks for this, I’ve been looking for videos on how to do this on my 2015.

  • @aTm121200
    @aTm1212003 жыл бұрын

    Same way I want to delete mine and keep the factory exhaust tips. Personally looks way better to me than the 5" tips other kits sell plus more expensive.

  • @woodysworkshop816

    @woodysworkshop816

    3 жыл бұрын

    Totally agree

  • @resharddurdley6987
    @resharddurdley69873 жыл бұрын

    I love that set up. I just ordered a 2021 F-350 XLT 6.7 Tremor and plan to just do the dpf delete pipe. I will keep the stock tail pipes. No need for a 5" exhaust imo. I just want longevity, increased efficiency and a bit more power. Thank you for the video.

  • @zackzander425

    @zackzander425

    3 жыл бұрын

    I'm getting a 2022 and want to do the same thing.

  • @resharddurdley6987

    @resharddurdley6987

    3 жыл бұрын

    @@zackzander425 Sweet! I've been very tempted to cancel my 21 and order 22 f350 platinum tremor. The 21 is scheduled to be delivered by April 14th. Not sure if the 22 with 12" screen sync 4 is worth waiting for a july/August delivery!

  • @alexbaker9967

    @alexbaker9967

    2 жыл бұрын

    @@resharddurdley6987 won't that void your trucks warranty if you delete it brand new

  • @thefartdart
    @thefartdart2 жыл бұрын

    great video man ! you can always use ratchet straps instead of a floor jack . I find it easier !

  • @andrewg.6059
    @andrewg.6059 Жыл бұрын

    dude great video. appreciate the step by step

  • @matthewkirkham8234
    @matthewkirkham82343 жыл бұрын

    Hello...Have you done the CP4 disaster prevention kit on your 6.7? I have the "no limits" egr delete kit was thinking of doing both at the same time.

  • @jamieofalltrades536
    @jamieofalltrades5363 жыл бұрын

    Any idea where to find tunes? Do any of the good tuners come pre programed with tunes?

  • @LWRC
    @LWRC2 ай бұрын

    Well done! Working on the bottom of any vehicle is difficult especially when you are wrestling a large section of piping that probably weighs over 80 lbs!!! 👍👍👍

  • @mouses911
    @mouses9112 жыл бұрын

    Thanks your video helped me alot!!!

  • @LWRC
    @LWRC2 ай бұрын

    That delete pipe looks so much cleaner and better and should have come from the factory that way!!! The engine sounds much better!!! 👍👍👍

  • @aaronzimmerman2019
    @aaronzimmerman20192 жыл бұрын

    What did you do with the electrical connectors? Did the delete kit come with caps of any kind? Thanks!

  • @alphonsotate2982
    @alphonsotate29823 жыл бұрын

    THIS IS SO SATIFYING WATCHING

  • @blainehand5353
    @blainehand53533 жыл бұрын

    What kind of tuner did you put in there and where did you buy it from?

  • @csofo11
    @csofo113 жыл бұрын

    Did you notice any fuel efficiencies, I know there is debate on this, but I'm curious if you did off just this single delete.

  • @hd883chopper
    @hd883chopper3 жыл бұрын

    Did the tuner prevent any error codes from showing on the dash?

  • @seanthompson5599
    @seanthompson55992 жыл бұрын

    What delete system are you using? I've a mini maxx on my F350 2011 - I want to upgrade the truck - but I need a delete kit for my 18 6.7

  • @williamflowers8138
    @williamflowers81383 жыл бұрын

    Can you gut the dpf you removed and replace it so it looks stock if you look underneath

  • @christorres5215
    @christorres5215 Жыл бұрын

    I have a 2015 and I'm gonna be doing a egr and def/dpf delete. Will my mini Maxx be enough for a tune or will I need to take it to a shop to get the pcm tuned as well?

  • @dirta2315
    @dirta23153 жыл бұрын

    Great detailed videos

  • @woodysworkshop816

    @woodysworkshop816

    3 жыл бұрын

    Thanks!

  • @joshseawright9500
    @joshseawright95002 жыл бұрын

    What happens with all the sensors and electrical connections?

  • @livnlifjap
    @livnlifjap Жыл бұрын

    Where did you get the delete pipe. I can't find any companies or websites that sells them. The only on I found is in Canada and they can't ship to the U.S.

  • @volbster2
    @volbster22 жыл бұрын

    Doing it that way, is there room for a muffler or would you have to buy the rest of the pipe to the back?

  • @baptistjohn4171
    @baptistjohn41712 жыл бұрын

    Did you use a tuner? Shift on the fly or not? Thanks

  • @ChillinwithCav
    @ChillinwithCav4 ай бұрын

    Dpf is clogged. I can get replacement or do a delete. What tune did you use? Any advice?

  • @frankiehughes7423
    @frankiehughes74233 жыл бұрын

    Did you have to reprogram it so no lights come on for it not havijg DEF or do you just delete it and go

  • @dennisbosquez.bujipkoi2129
    @dennisbosquez.bujipkoi21292 жыл бұрын

    Can you please send me the links for the exhaust pipe and tunner you used on this project?..thanks

  • @gfp400
    @gfp400 Жыл бұрын

    can you post the link where you got the pipe that replaced your DPF?

  • @wyattneiber8192
    @wyattneiber81922 жыл бұрын

    You can do this without bringing it the shop?? No check engine lights on after you took it off?

  • @brandonhall8404
    @brandonhall84043 жыл бұрын

    What size is the factory pipe? 3.5 or 4

  • @kevinaragon8011
    @kevinaragon80119 ай бұрын

    I'm new to having a diesel truck! Do I have to make other adjustments? so that my truck stays the same???

  • @iwata7827
    @iwata7827 Жыл бұрын

    Hey where did you get the block off plate for the egr ?

  • @BradlyFackrell
    @BradlyFackrell3 ай бұрын

    I drove from the Oregon Coast to N. Idaho and back down to S. Idaho at 2500 RMP most of the way with limited acceleration and the stupid message saying, "Drive to clean...". I'm so pissed off at this emissions crap that I'm ready to remove it forever. This looks like a good starting point. Is there more information about resetting the computer and getting the new straight pipe? Do I need to get the pipe custom-made? I'm sure the computer will not be happy when I disconnect all the sensors. How do I deal with that? My truck is the 2014 F350 Super 6.7 Turbo Deisel.

  • @salvadortapia3851
    @salvadortapia3851 Жыл бұрын

    What company did you get the delete from and did you need a tune?

  • @robertmaule5173
    @robertmaule51738 ай бұрын

    Im late to the game lol bit i have a 450 i just put the new s&s dcr pump n and def gonna make a few more mods what programming did you use to delete?

  • @brettfifield2495
    @brettfifield24952 жыл бұрын

    What tuners are you guys getting and where from?

  • @bobbyrebussini1466
    @bobbyrebussini14663 жыл бұрын

    good vid. Was just watching to see how bad it was compared to my duramax. doesnt look bad at all.

  • @adrianmorejon9568

    @adrianmorejon9568

    2 жыл бұрын

    very easy compared to duramax

  • @crusader4507
    @crusader45078 ай бұрын

    Do you have to drain your def tank after your unplug it incase you have to put it back on?

  • @WhiteKnuckleRacingJD
    @WhiteKnuckleRacingJD Жыл бұрын

    What are you doing for tuning for the CEL?

  • @jlra5734
    @jlra573410 ай бұрын

    if you remove the dpf do you need to tune it as well?

  • @seanthompson5599
    @seanthompson55992 жыл бұрын

    Why wouldn't you do the entire exhaust system?

  • @mradventure418
    @mradventure418 Жыл бұрын

    What about the engine computer do you have to reset?

  • @Buszzbait69
    @Buszzbait693 жыл бұрын

    Great video..I like the way you cover every detail..if I did this I heard the tune will close the egr anyways and you can just unplug it..what’s your thoughts?

  • @MrAlexGolovin

    @MrAlexGolovin

    2 жыл бұрын

    Yes you want to get rid of the EGR cooler and the EGR housing. Then you use block off plates to redirect the exhaust gases.

  • @justinwhitlock8663

    @justinwhitlock8663

    2 жыл бұрын

    As long as the tune closes the EGR you can just unplug it

  • @superduty2023
    @superduty20233 жыл бұрын

    Thanks for video... I have a few n00b questions... Is it a little louder now without the dpf? Would MPG change if you went from factory tips to 4 or 5 inch?

  • @woodysworkshop816

    @woodysworkshop816

    3 жыл бұрын

    Yes it is noticeable louder without the DPF. No MPG would have no noticeable difference caused by what exhaust tip you choose.

  • @dylancurtis5667

    @dylancurtis5667

    3 жыл бұрын

    @@woodysworkshop816 can I do the dpf an the egr delete with out getting a Tunner or chip

  • @ironlady2814
    @ironlady28143 жыл бұрын

    Interesting and informative procedure, my question is this- ( I have a 2017 which I bought new) when you flash through the OBD will it erase all fault codes and keep them from reappearing? And will the trucks history know you did this if you have to reinstall the DPF? I have 42 miles on the odometer now. Thank you

  • @ironlady2814

    @ironlady2814

    3 жыл бұрын

    I meant 42000 miles

  • @woodysworkshop816

    @woodysworkshop816

    3 жыл бұрын

    Yes it will clear codes and block the associated faults from returning. As far as the history I’m not sure about that. For me I won’t be re installing so I wasn’t concerned about that.

  • @abramspearman9046

    @abramspearman9046

    3 жыл бұрын

    Once you tune it there will be a footprint left, even if you re install everything and flash the stock tune back in.

  • @emmanuelchavez5107
    @emmanuelchavez5107 Жыл бұрын

    So you don’t have to use a tuner? To reprogram

  • @slosher42
    @slosher42 Жыл бұрын

    What else did you do to trick the computer to think it was still there THANKS in adv.

  • @livelong6685
    @livelong668511 ай бұрын

    I've been looking around for this deleted 4th gen 6.7 but whenever i hear the result,it's so quiet it sounds stock still?

  • @garybruno4360
    @garybruno43602 жыл бұрын

    Good video, what did you do for a tuner to eliminate the def and dpf logic?

  • @nitrojunkie22

    @nitrojunkie22

    Жыл бұрын

    I ordered all my stuff from DPF Delete Shop. They’re in Canada, but don’t have EPA crap to deal with. You can not legally buy a tuner with delete tunes in the US.

  • @roscobear6143
    @roscobear61433 жыл бұрын

    Looking for some info almost nobody covers....... what do ya do with the def fluid ..... is the inlet pipe just hanging loose .... is their a plug for the end of it . Do you have to disconnect the power to the pump. How do you stop the fluid without any input from the No2 sensors.

  • @woodysworkshop816

    @woodysworkshop816

    3 жыл бұрын

    I zip tied the line up and also disconnected the 2 connectors at the def tank/ pump. They are super easy to disconnect. They are located on the bottom of the tank and have a access flap that drops down. Sorry I didn’t realize I forgot to mention this.

  • @dankfrahm
    @dankfrahm3 жыл бұрын

    Great video Quick question! I’m going with a tune and 5” pipes. But I’m curious. If I were to run new pipes before the tune comes in. After pulling out everything you did. Does it not throw codes and freak out because the computer is still looking for all the DPF and sensors? Thanks

  • @woodysworkshop816

    @woodysworkshop816

    3 жыл бұрын

    Yea you will need the tune or you will have a bunch of lights on.

  • @jamieofalltrades536

    @jamieofalltrades536

    3 жыл бұрын

    @@woodysworkshop816 will it even run without the tune? I'm pretty sure that the computer shuts you down if it detects no DPF.

  • @kyledavis2901
    @kyledavis29013 жыл бұрын

    How do you like that tuner/programmer? Were you able to flash the ecu to delete the dpf and egr with that programmer then unplug it? I’m wanting to use a Edge insight for a monitor. Thank you.

  • @woodysworkshop816

    @woodysworkshop816

    3 жыл бұрын

    It works great for what I need. I like to set it and forget it.

  • @kyledavis2901

    @kyledavis2901

    3 жыл бұрын

    @@woodysworkshop816 where did you wire the switch on the fly into? I ordered this kit Sunday so I’m trying to figure out what all is in involved to be prepared.

  • @devinreimers2998
    @devinreimers29983 жыл бұрын

    Did you run delete it before doing the exhaust and no issues? I’ve got all the goodies on the way but won’t have time to knock it out in one day.

  • @crownfamilybullys5742

    @crownfamilybullys5742

    3 жыл бұрын

    Did you run it before doing the exhaust?

  • @Sultanoftheblind
    @Sultanoftheblind2 жыл бұрын

    Hey can you send me the link for the pipe wanna get the right one

  • @GrassMonkeyLLC
    @GrassMonkeyLLC3 жыл бұрын

    nice video ,thanks

  • @woodysworkshop816

    @woodysworkshop816

    3 жыл бұрын

    Glad you liked it!

  • @DeCapalott
    @DeCapalott9 ай бұрын

    do you have to tune it ?

  • @rbell944
    @rbell9443 жыл бұрын

    How much was the kit? Any cel codes? What did you do with all those plugs you disconnected?

  • @woodysworkshop816

    @woodysworkshop816

    3 жыл бұрын

    The kit was $1100. I just ripped the finger portion of a nitrile glove off and put them around the connectors and zip tie them to keep them dry and prevent corrosion. Or if you want a more professional solution you can buy a kit like this upcountryfab.com/product/2015-2016-ford-6-7l-dpf-harness-plug-kit/

  • @fredwoodley5970
    @fredwoodley5970 Жыл бұрын

    Is there any tunes involved with this

  • @mikegraff4973
    @mikegraff49733 жыл бұрын

    How many miles were on it when you did the egr? I'm really stressing the bolt breaking. Im at 75k miles same truck

  • @woodysworkshop816

    @woodysworkshop816

    3 жыл бұрын

    136k, just take your time and use hand tools.

  • @tonyg4546
    @tonyg45463 жыл бұрын

    Did you program your truck? If so what programmer did you use? Thank you.

  • @woodysworkshop816

    @woodysworkshop816

    3 жыл бұрын

    Yes I did, I used the SCT bdx tuner that was included in the kit I purchased. www.ebay.com/itm/2017-2019-FORD-6-7-DIESEL-RACE-KITS-PACKAGE-SHIFT-ON-THE-FLY-TUNER-RACE-READY/174438019061?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D225118%26meid%3D04a0d7c619ee4c12b2ec13d071e08e26%26pid%3D100675%26rk%3D1%26rkt%3D15%26mehot%3Dnone%26sd%3D174438019061%26itm%3D174438019061%26pmt%3D1%26noa%3D1%26pg%3D2380057%26brand%3DCustom&_trksid=p2380057.c100675.m4236&_trkparms=pageci%3Abb3564dd-0fc3-11eb-b0a4-4ee8c3e4b619%7Cparentrq%3A3203792e1750aae88fbe8814fffec0d4%7Ciid%3A1

  • @motorhead883_8
    @motorhead883_82 жыл бұрын

    What tune bro

  • @wisxc237
    @wisxc2373 жыл бұрын

    Can you put a link to where you got key from thanks

  • @woodysworkshop816

    @woodysworkshop816

    3 жыл бұрын

    www.ebay.com/itm/2017-2019-FORD-6-7-DIESEL-RACE-KITS-PACKAGE-SHIFT-ON-THE-FLY-TUNER-RACE-READY-/174438019061?nav=SEARCH

  • @waylinvanhalen
    @waylinvanhalen2 жыл бұрын

    Whaja do with the computer buddy?

  • @jackdooley1436
    @jackdooley14363 жыл бұрын

    Did you have to do anything with the computer or did it not care that you unplugged the wires ?

  • @woodysworkshop816

    @woodysworkshop816

    3 жыл бұрын

    Yea you have to program/tune the truck

  • @jackdooley1436

    @jackdooley1436

    3 жыл бұрын

    @@woodysworkshop816 alright. I'm thinking about doing it when the warranty is up. I'm just afraid of the emissions laws. I live on Michigan and you do not need to be tested like in California for emissions laws every year if you know what I mean. I guess I'm afraid of getting caught with a deleted truck and getting a ticket. Am I just overreacting or how do you feel when you friends around with the deleted truck

  • @selder03
    @selder033 жыл бұрын

    So dpf delete keeps the EGR equipment in tact? Great video and detail on the process

  • @MrAlexGolovin

    @MrAlexGolovin

    2 жыл бұрын

    You should delete both together.

  • @matthewmueller6342

    @matthewmueller6342

    2 жыл бұрын

    The DPF a nd EGR are on completely different ends of the truck..

  • @selder03

    @selder03

    2 жыл бұрын

    @@matthewmueller6342 ya don't say? That wasn't the question.

  • @85305

    @85305

    2 жыл бұрын

    @@selder03 your question doesn't make sense. That's as stupid as asking "did your exhaust stink after changing your tires?"

  • @selder03

    @selder03

    2 жыл бұрын

    @@MrAlexGolovin what I thought too

  • @Tripp_777
    @Tripp_7773 жыл бұрын

    Is is nessesary to do the EGR delete? I was hoping to just order the SCT BDX tuner and the straight pipe. I was under the impression that the time will just close the EGR.

  • @Graplernapler

    @Graplernapler

    3 ай бұрын

    Did you ever find an answer for this? I’m wondering the same. Let me know if you can. Thanks

  • @Tripp_777

    @Tripp_777

    3 ай бұрын

    @@Graplernapler I did not

  • @frankcumella5789
    @frankcumella57893 жыл бұрын

    This kit you used appears to have the EGR delete as well. Is that correct?

  • @woodysworkshop816

    @woodysworkshop816

    3 жыл бұрын

    Yes it was a full delete kit.

  • @keithmurphy9265

    @keithmurphy9265

    3 жыл бұрын

    @@woodysworkshop816 where did you get your kit? Call me 417-288-8955. Having troubles finding them for my 13 6.7

  • @ckonthebay1950
    @ckonthebay19503 жыл бұрын

    I thinking about ordering this kit for my “race” truck. Do you have to keep the tuner plugged in the obd all the time?

  • @woodysworkshop816

    @woodysworkshop816

    3 жыл бұрын

    No, the tuner is only plugged in when you are re flashing the truck. The only exception would be if you are data logging or would like to leave it plugged in to display any gauges.

  • @ckonthebay1950

    @ckonthebay1950

    3 жыл бұрын

    Woody’s Workshop where does the shift on the fly wire into?

  • @ckonthebay1950

    @ckonthebay1950

    3 жыл бұрын

    Woody’s Workshop one thing. Did you do the programming before or after you unplugged everything. I emailed DRK but they haven’t responded back.

  • @woodysworkshop816

    @woodysworkshop816

    3 жыл бұрын

    @@ckonthebay1950 Sorry for the late response in I recall correctly the switch wires into the intake air temp sensor. Also it does not matter if you program the truck before or after unplugging everything since you will be clearing the fault memory in the process anyways.

  • @MrAncraf
    @MrAncraf Жыл бұрын

    I have my truck f250 2009. In Angola where they don’t have ULFD available… Been getting fuel from Namibia. But the finances are scarce 😢… Is there any solution to run a normal diesel without compromise the engine?! Need a help!

  • @woodysworkshop816

    @woodysworkshop816

    Жыл бұрын

    HI Anildo, I'm not sure what type of emissions equipment is installed on a 6.4 in Africa. If you don't have a DPF or EGR cooler I don't think you would have an issue running a higher sulfur content diesel. If you do have a DPF our EGR cooler I would stay with ULSD as higher sulfur content diesel will result in significantly more particulates that will eventually clog these systems. Hope this is helpful!

  • @letsgobrandon7112
    @letsgobrandon71123 жыл бұрын

    Where can I buy just the pipe? I dont need the rest that comes in that kit as I'm going with Proven. Thanks. Part # for that pipe?

  • @spoiledrotten58

    @spoiledrotten58

    3 жыл бұрын

    Did you get an answer? I have the 2017 Lariat 6.7 crew cab. Looking for the pipe, too.

  • @letsgobrandon7112

    @letsgobrandon7112

    3 жыл бұрын

    @@spoiledrotten58 I found this: www.dpfdeleteshop.com/collections/dpf-delete-pipes/products/dpf-cat-delete-pipe-ford-powerstroke-diesel-6-7-17-19?variant=34381330972807

  • @mattb.9572
    @mattb.95723 жыл бұрын

    Did you have to do anything after unplugging all the sensors?

  • @woodysworkshop816

    @woodysworkshop816

    3 жыл бұрын

    Just a tune, some people buy plug kits to protect the disconnected connectors from corrosion but I did not.

  • @rbell944

    @rbell944

    3 жыл бұрын

    Woodys Workshop so you also had to do a tune? Did you get on installed or buy a tuner? Loving the channel!

  • @woodysworkshop816

    @woodysworkshop816

    3 жыл бұрын

    @@rbell944 Thanks! I did have to re flash the truck. I chose to get the cheaper SCT tuner that was included with the kit versus the more popular and expensive ez lynk. For me I couldn't justify the additional cost of the EZ lynk tuner. The kit I purchased comes with 5 tunes already pre loaded, you just have to plug into your obd port and follow the instructions. You can change the tune from 0HP all the way to an additional 220HP just by turning a switch.

  • @mattb.9572

    @mattb.9572

    3 жыл бұрын

    Would you be willing to share the steps I need in order to delete my egr and dpf? Do in need to do one before the other and when does the tuner come into play? Thank you

  • @woodysworkshop816

    @woodysworkshop816

    3 жыл бұрын

    Matt B. Once the DPF and EGR are removed you will need to re flash/ tune the truck immediately after. I made a video for both EGR and DPF removal.

  • @jasonwagers7243
    @jasonwagers72432 жыл бұрын

    Tuner????

  • @Frog_man007
    @Frog_man0073 жыл бұрын

    What tune did you go with?

  • @woodysworkshop816

    @woodysworkshop816

    3 жыл бұрын

    SCT BDX tuner with shift on the fly and tunes from diesel race kits.

  • @Frog_man007

    @Frog_man007

    3 жыл бұрын

    @@woodysworkshop816 thanks bro.

  • @nitrojunkie22
    @nitrojunkie222 жыл бұрын

    Dumb question, but I'm assuming you have to drain the DEF tank before disconnecting it from the metering device?

  • @fredwoodley5970

    @fredwoodley5970

    Жыл бұрын

    No, there's a pump in the def tank. Leave it about half full or full incase you ever have to put the dpf back on

  • @boraxguy8302
    @boraxguy83023 жыл бұрын

    Joe Biden is typing...

  • @mtoto78

    @mtoto78

    2 жыл бұрын

    FJB

  • @williamthigpen4480

    @williamthigpen4480

    2 жыл бұрын

    FJB

  • @laceydevillier3922

    @laceydevillier3922

    2 жыл бұрын

    FJB

  • @user-gq5rn8bq7z

    @user-gq5rn8bq7z

    8 ай бұрын

    @@laceydevillier3922FJB

  • @jeffreyhebda6709

    @jeffreyhebda6709

    6 ай бұрын

    He doesn’t know how to type ! Lol

  • @user-gq5rn8bq7z
    @user-gq5rn8bq7z8 ай бұрын

    Does that mean you don’t have put that’s bullshit def fluid

  • @MarkGarver
    @MarkGarver4 ай бұрын

    Absolutely amazing video #fucktheepa

  • @porkchop2723
    @porkchop27232 жыл бұрын

    The increased fuel economy is from this weight loss

  • @nitrojunkie22

    @nitrojunkie22

    Жыл бұрын

    The increased fuel economy is from letting the engine breathe. 2018 F250 6.7….. DPF/EGR delete, cold air intake, 5 inch downpipe back exhaust, and I get about 21 mpg on a race tune.

  • @MistAtsiM
    @MistAtsiM8 ай бұрын

    How about f anybody who thinks these little trucks are to blame... Let's talk cruise ships... Let's talk airplanes... Let's talk military... Let's talk semis until recent years. Epa need to chill out on pickups

  • @LWRC

    @LWRC

    2 ай бұрын

    It's all the nonsense the Democrats are shoving down our throats! It's not only trucks. Years ago, due to stricter emission regulations, auto manufacturers had to go to direct injection of gasoline into the combustion chambers. This bypassed the back sides of intake valves that use to get cleaned by the injector spraying the back sides with gasoline. Now EGR valves dump bypass gases from the crankcase back into the manifold and this builds up carbon on the back sides of the intake valves for direct injection engines. Guess what, it costs thousands of dollars to use walnut blasting or other methods to remove these carbon deposits after 70K or 80K miles on the engine! Another strick EPA law that basically does nothing in the overall scheme of things and yet, this costs consumers thousands of dollars in maintenance costs!

  • @Vladimir2339
    @Vladimir23398 ай бұрын

    Hi Bro , I have a question: if you remove the exhaust , what should you do with the electrical part and the computer?