2016 VW Volkswagen and Skoda Key FOB COMPLETE teardown and battery replacement
I couldn't find anyone who had done a full teardown of this key FOB so I made this video. If you intend to open your key, TAKE YOUR TIME...be careful and it'll all work out.
REPLACEMENT BATTERY amzn.to/38Ek9o9
MultiTool amzn.to/2VZ0wSK
Camera amzn.to/38Lr13m
Hat whr.institute/products
Пікірлер: 49
Let's eee, the dealership wanted $350, the fob case on ebay cost $15 with shipping, so that's $335 you just saved me. Thank you!!!
I know this is an old video but I want to add that the torx bit is a T300 for anyone with a precision driver set. I had an issue with a rapidly dying battery so I disassembled to right before breaking the seal, and hosed the inside with contact cleaner and shook it really hard a few times. This completely resolved the battery dying issue.
Thanks Dean, I needed to replace Fob due to the key blade broke before the pin. Video was great I transferred circuit board and original key blade to a $15 internet Fob and saved me from the dreaded dealers estimate of $450.
Thank you for uploading this. Could not have repaired my key blade without this walkthrough!
Thanks Dan, I managed to fully disassembly my key and reassembly it after fix without breaking it thanks to your very clear instructions! There was probably a bad contact with the battery. You made my day anyway 😉
I really enjoyed watching this DIY tutorial video Dean!
Thank you! This was the only helpful video I could find. I was able to do the replacement myself and avoid paying about $400 at the dealer... thanks!
Only thing to add is when you reassemble, you need to align the front cover to the spring holding the cover upside down. This ensures the bit of the spring sticking out slots into the front cover properly. Then rotate the front cover anti-clockwise so it is then aligned with the back of the key. This will ensure the spring has tension and the key flicks out properly in the right direction.
Whee! You saved me 800 of my hard earned Aussie dollars. Once i could see the PCB, was an easy fix. Huzzah!
Thanks! Your video prevent me from total key disassembly)
You did that so easily. Loved it.
Thanks man, trying to open my 2019 key for a couple hours...but dang i'm tearing up the plastic. I saw another video which made it look so easy, but now that you mentioned its epoxied I realize how hard this is going to be.
Hi Thank you. Did you fix it? There are videos showing how to repair a leg of some chip
Thanks Dean, I figured out to use a small heating gun additionally (gently)it helped not to break the parts
I love your old man vibes. So endearing. 😀
Thanks for the video Dean. Were you able to locate the RFID chip ?
Excellent video loved it!!! Please make more 👍
açıklayıcı ve güzel bir video olmuş, teşekkürler. great thanks.
Great 👍 I will try on my fob key 🔑. Thanks again
This was helpful. Thank you!!
Neistat Bros Tutorials and DIY Fixes. Make it a channel!
Super helpful! Thanks!
Any chance you can tell me the part number on the inductor coil (I think thats the name. The black circle copper coil above the battery contacts. Would be much appreciated!
Ah yes, the tutorial I needed
you really helped me. Thanks
Thanks I just changed my case 👍🏽
Obrigado. O seu vídeo ajudou bastante. deu tudo certo.
Aqui no Brasil, não tem vídeos nessa orientação.
Just watched the whole video and I dont even own a key 😭😭
thank you !
Dean, we all know that the fob fell into the water when you were surfing
Torx size 6 for the screw, for anyone stumbling on this.
@JUNIOR-ot4bb
2 ай бұрын
thx you
Is there a separate transponder chip? Or is it part of the main board? They used to be pill shaped
@deanneistat3627
2 жыл бұрын
It's all integrated. I had to resolder one of the micro pins on the transponder chip
You can add Audi , Lamborghini and Ducati to the title to this list ... all share this same key setup nice 👍🏽 video ... much needed
@AlanGreenOne
Жыл бұрын
Skoda too!
I am lucky to receive a couple of Dean's List from my University. Imagine someone named Dean achieve Dean's List during their studies 😂
The screw on my leg required a 000 Philips screwdriver.
Il prezzo delle chiavi delle auto è diventato un insulto all'onestà dei lavoratori. (ma è un discorso che vale per tante altre realtà). Grazie per averci insegnato a risparmiare un sacco di soldi e rifiutarmi di pagare questo "pizzo". (ricatto) 😊🙏🏼🔝
Love your shit
Lucky Dean has a GTI lol 🙃
sup dean
Dean say hi
Dude this is so weird. I got a battery needs to be replaced on my Octavia, then this pops up.
Dean fucking upload a video
@deanneistat3627
3 жыл бұрын
I am a slave to the 4th wall.
@motomason
3 жыл бұрын
@@deanneistat3627 Those Moto vlogs were the hit!! The trip across America was dope!!
fucking upload another video dean