Love the video bro....the best that's available on KZread...you explained it well along with visual recording, so those that dont know about car can see it clear what your are talking about and not get lost....been looking for a vi6like this for my Toyota highlander...thank you!!!
@catrashoo3 жыл бұрын
Thanks for your time .
@1tbounty3 жыл бұрын
Ez peasy on the battery connection. Thanks !
@mdlcasi20004 жыл бұрын
what happened to that other piece that was attached to the fog light blank ? also it would have been helpful to see the fire wall after you ran the wire - were you able to close it or did you have to cut a hole? great video.. I have a 2019 and I want to do the same...
@rangerul13 ай бұрын
Thx for the video. Was very helpful. I bought the kit and was happy with the results however, I have my switch turned off but with a dimmer light all the time even when not running. Any advice on how it supposed to light ? Thx
@thatredcam4 жыл бұрын
Does the last red cable connecting to the park light (green cable) the same as connecting to the ignition ???
@adelalhamdani73875 жыл бұрын
very good vidio many thanks
@Eric-ox5iu2 жыл бұрын
Would it be possible on the final red wire step to just connect it to an (add a fuse) vs patching into park lights ?
@radanesdelambaca66474 жыл бұрын
I bought foglight harness it doesnt come with fuse in it and the color wires are black , white, and yellow. I know that the black is for ground, is the white color is always goes to the battery.
@mvtroiano3 жыл бұрын
Thank you for explaining each step. A friend might be needed for some steps :)
@cg_xiii3 жыл бұрын
Is there anywhere else I can connect the park light wire to the harness?
@hipercool125 жыл бұрын
Very good video. I used to put all of the harness near the fusebox in the car and getting the 12v for the relay with an "add a circuit". You should definitively solder your wire on the 12v from the corner light by the way...
@dukenukeman
2 жыл бұрын
The old fashion twist method works perfectly No need to solder it Shrink wrap and it's good to go
@captainahmedA3804 жыл бұрын
Why would u install the wires on the battery such a rookie mistake u should of got power from.the interior fuses much cleaner
@pinnaclefamilychiropractic59185 жыл бұрын
Where do you buy the kit?
@truyng5 жыл бұрын
Im iffy on getting the wire through the firewall.
@shadowman04284 жыл бұрын
very good and straight to the point
@dunnkruger88252 жыл бұрын
Thanks
@30kenton2 жыл бұрын
how did wire the fog lights ..
@AE-qq1mj Жыл бұрын
I have the exact fog lights on my 2018 rav4 LE installed by toyota. My fog light look like flash lights when they are on. I dont know what happened but they are not bright like your fog lights. Any idea?
@dangtruong7616 жыл бұрын
You install your fog light switch upside down.
@apriltundag4521 Жыл бұрын
I followed every step you've done but still have the lights won't come on. U mentioned something bout u splice the ground? Why? I connected the ACC to the parking but didn't work at all. What did I do wrong?
@emmanuelarape32743 жыл бұрын
Hi there, I wanna install that one on my rav4, can you please tell me. What is the name of fog light and which online site did you bought it. Thanks. Hopefully you will see my message thanks
Пікірлер: 26
Love the video bro....the best that's available on KZread...you explained it well along with visual recording, so those that dont know about car can see it clear what your are talking about and not get lost....been looking for a vi6like this for my Toyota highlander...thank you!!!
Thanks for your time .
Ez peasy on the battery connection. Thanks !
what happened to that other piece that was attached to the fog light blank ? also it would have been helpful to see the fire wall after you ran the wire - were you able to close it or did you have to cut a hole? great video.. I have a 2019 and I want to do the same...
Thx for the video. Was very helpful. I bought the kit and was happy with the results however, I have my switch turned off but with a dimmer light all the time even when not running. Any advice on how it supposed to light ? Thx
Does the last red cable connecting to the park light (green cable) the same as connecting to the ignition ???
very good vidio many thanks
Would it be possible on the final red wire step to just connect it to an (add a fuse) vs patching into park lights ?
I bought foglight harness it doesnt come with fuse in it and the color wires are black , white, and yellow. I know that the black is for ground, is the white color is always goes to the battery.
Thank you for explaining each step. A friend might be needed for some steps :)
Is there anywhere else I can connect the park light wire to the harness?
Very good video. I used to put all of the harness near the fusebox in the car and getting the 12v for the relay with an "add a circuit". You should definitively solder your wire on the 12v from the corner light by the way...
@dukenukeman
2 жыл бұрын
The old fashion twist method works perfectly No need to solder it Shrink wrap and it's good to go
Why would u install the wires on the battery such a rookie mistake u should of got power from.the interior fuses much cleaner
Where do you buy the kit?
Im iffy on getting the wire through the firewall.
very good and straight to the point
Thanks
how did wire the fog lights ..
I have the exact fog lights on my 2018 rav4 LE installed by toyota. My fog light look like flash lights when they are on. I dont know what happened but they are not bright like your fog lights. Any idea?
You install your fog light switch upside down.
I followed every step you've done but still have the lights won't come on. U mentioned something bout u splice the ground? Why? I connected the ACC to the parking but didn't work at all. What did I do wrong?
Hi there, I wanna install that one on my rav4, can you please tell me. What is the name of fog light and which online site did you bought it. Thanks. Hopefully you will see my message thanks
excellent job
Very gud video man
Switch is upside down and loose