I like your explanation. However, it is preferred if you used the factory prewired fog light harness instead of the kit. You just needed the lights themselves, the OEM relay, and the OEM turn signal/ fog light switch on the steering wheel column. This method is the correct way because you don’t have to put wires through the firewall that may cause problems in the future. It is also a cleaner install. It was your choice though so I respect that. Good job explaining the aftermarket kit process.
@ricardomilos4388
Ай бұрын
where can someone purchase the OEM turn signal/ fog light switch on the steering wheel?
@gilbertferro2013Ай бұрын
The clip head is recessed within the clip so you have to push from the bottom nipple upwards to get the top of the connector to come up this way you can access it easier and it pulls right out
@ashleyspiteri46086 жыл бұрын
Great Video! Well explained. Looking forward to seeing more of your videos.
@sanantoniorose98324 жыл бұрын
I think this video is great. It will be a big help when I install my lights soon as it warms up here in a few days, I want to answer a question that I and a couple other viewers had. Trini Valley forgot to address it. Yes there is a factory wiring harness already installed. If you figure out how to use it the fog lights will operate ONLY WHEN THE HEADLIGHTS ARE ON LOW BEAM. That's not the best way to use fog lights in really dense fog. The way that was shown in the video allows the fog lights to be used with the low beam headlights both on and off. Inside the car you can switch the lights to park, the headlights go off and the fog lights will work. You will be able to see better without the low beams. You will always have the tail lights on so it is still safe for cars coming up behind you. Dynamite video. PS. Now in December 2019, kits are available on Amazon for just $40 and $50. The $50 kit I purchased has SAE approved lenses. The $40 kit does not. I also installed LED bulbs in place of the halogens supplied with the kit.
@joselollopez593 жыл бұрын
Thanks for recording and share this wonderful video.
@sh-zv3eq3 жыл бұрын
Clearly explained and demonstrated !
@El_chero2 жыл бұрын
Thank you I am filling every step and you made easy 😀
@mvtroiano3 жыл бұрын
Thank you for being so detailed.
@yakoobyakoob63975 жыл бұрын
Excellent video...
@rayallensr89992 жыл бұрын
I,m missing the 4 screws to attache the lights to bezel. what size are the self tapping screws ?? GREAT VIDEO!!!
@saminemo49123 жыл бұрын
Hi I have 2019 rav4 And the battery in the back where I can hook the white wire thanks
@michaelschratz48422 жыл бұрын
Will fog lights auto turn off when high beams are on? PA wont pass inspection if not
@30kenton2 жыл бұрын
Excellent video..continue the good work..have u ever installed daytime running light with fog lights..
@saminemo49123 жыл бұрын
My friend I have 2019 rac 4 any video of fog light installition. Because I don’t know where to put a power wire that god into a batterie but my batterie is in the back
@yogaobmale84918 күн бұрын
did you buy the wire kit separately?
@charlesloh45934 жыл бұрын
best of yours
@Thebrickrobloxcat5 жыл бұрын
Liked your video..very detailed.. but yeah...same question... why not use the harness thats already installed for a fog light?
@El_chero
2 жыл бұрын
I have the harness there but there is no power
@dangkhoatran22044 жыл бұрын
Thanks for your video. So where did you guys buy the whole fog light kit?
@El_chero
2 жыл бұрын
Ebay
@dukenukeman2 жыл бұрын
Just wondering what are the harness with the green color already hanging there It is already prewired from the factory ?
@El_chero
2 жыл бұрын
They are but are disabled
@zeta67985 жыл бұрын
Tha car come ready with evrityng
@dangtruong7616 жыл бұрын
The wiring harness that attached to the blank space that is the fog light wire from factory. Why don’t you used that wiring harness connect to your fog lights. Instead you used the wiring harness that included with the fog lights kit.
@StinnMysterious
4 жыл бұрын
So how do you turn it on if factory wire is used? Iam going to do mine
@mannygoncalves6082
4 жыл бұрын
Any car that has the option for fog lights will have factory installed wire hardness mounted somewhere near the fog bezel. That hardness can be used only if you swap your whole turn signal switch that has the option to turn on the fog light.
@StinnMysterious
4 жыл бұрын
manny goncalves my car has that same harness and I connected that to the new lights but didn’t work because the steering wheel doesn’t have that switch. Ended up installing like him.
@mannygoncalves6082
4 жыл бұрын
@@StinnMysterious yeah without that switch with the option to turn on the fog light it won't work. I'm going to order a used switch on ebay
@StinnMysterious
4 жыл бұрын
manny goncalves bought from amazon. Good return policy 😀. make sure your bulbs have matching pins.
@saminemo49123 жыл бұрын
It’s a hybrid tab 4
@SuperCesar19754 жыл бұрын
At 14:40 you see the green connector pre wired
@El_chero
2 жыл бұрын
But no powrred
@manzoncupkris4 жыл бұрын
low volume
@idunno42765 жыл бұрын
Dude there is a harness wire from the factory. You could at least use it. No need to install a new harness. Common sense
Пікірлер: 41
I like your explanation. However, it is preferred if you used the factory prewired fog light harness instead of the kit. You just needed the lights themselves, the OEM relay, and the OEM turn signal/ fog light switch on the steering wheel column. This method is the correct way because you don’t have to put wires through the firewall that may cause problems in the future. It is also a cleaner install. It was your choice though so I respect that. Good job explaining the aftermarket kit process.
@ricardomilos4388
Ай бұрын
where can someone purchase the OEM turn signal/ fog light switch on the steering wheel?
The clip head is recessed within the clip so you have to push from the bottom nipple upwards to get the top of the connector to come up this way you can access it easier and it pulls right out
Great Video! Well explained. Looking forward to seeing more of your videos.
I think this video is great. It will be a big help when I install my lights soon as it warms up here in a few days, I want to answer a question that I and a couple other viewers had. Trini Valley forgot to address it. Yes there is a factory wiring harness already installed. If you figure out how to use it the fog lights will operate ONLY WHEN THE HEADLIGHTS ARE ON LOW BEAM. That's not the best way to use fog lights in really dense fog. The way that was shown in the video allows the fog lights to be used with the low beam headlights both on and off. Inside the car you can switch the lights to park, the headlights go off and the fog lights will work. You will be able to see better without the low beams. You will always have the tail lights on so it is still safe for cars coming up behind you. Dynamite video. PS. Now in December 2019, kits are available on Amazon for just $40 and $50. The $50 kit I purchased has SAE approved lenses. The $40 kit does not. I also installed LED bulbs in place of the halogens supplied with the kit.
Thanks for recording and share this wonderful video.
Clearly explained and demonstrated !
Thank you I am filling every step and you made easy 😀
Thank you for being so detailed.
Excellent video...
I,m missing the 4 screws to attache the lights to bezel. what size are the self tapping screws ?? GREAT VIDEO!!!
Hi I have 2019 rav4 And the battery in the back where I can hook the white wire thanks
Will fog lights auto turn off when high beams are on? PA wont pass inspection if not
Excellent video..continue the good work..have u ever installed daytime running light with fog lights..
My friend I have 2019 rac 4 any video of fog light installition. Because I don’t know where to put a power wire that god into a batterie but my batterie is in the back
did you buy the wire kit separately?
best of yours
Liked your video..very detailed.. but yeah...same question... why not use the harness thats already installed for a fog light?
@El_chero
2 жыл бұрын
I have the harness there but there is no power
Thanks for your video. So where did you guys buy the whole fog light kit?
@El_chero
2 жыл бұрын
Ebay
Just wondering what are the harness with the green color already hanging there It is already prewired from the factory ?
@El_chero
2 жыл бұрын
They are but are disabled
Tha car come ready with evrityng
The wiring harness that attached to the blank space that is the fog light wire from factory. Why don’t you used that wiring harness connect to your fog lights. Instead you used the wiring harness that included with the fog lights kit.
@StinnMysterious
4 жыл бұрын
So how do you turn it on if factory wire is used? Iam going to do mine
@mannygoncalves6082
4 жыл бұрын
Any car that has the option for fog lights will have factory installed wire hardness mounted somewhere near the fog bezel. That hardness can be used only if you swap your whole turn signal switch that has the option to turn on the fog light.
@StinnMysterious
4 жыл бұрын
manny goncalves my car has that same harness and I connected that to the new lights but didn’t work because the steering wheel doesn’t have that switch. Ended up installing like him.
@mannygoncalves6082
4 жыл бұрын
@@StinnMysterious yeah without that switch with the option to turn on the fog light it won't work. I'm going to order a used switch on ebay
@StinnMysterious
4 жыл бұрын
manny goncalves bought from amazon. Good return policy 😀. make sure your bulbs have matching pins.
It’s a hybrid tab 4
At 14:40 you see the green connector pre wired
@El_chero
2 жыл бұрын
But no powrred
low volume
Dude there is a harness wire from the factory. You could at least use it. No need to install a new harness. Common sense
Speak louder!!!!!!!