Removing the aftermarket deal installed alarm on the Odyssey after the alarm would randomly go off for no reason.
Жүктеу.....
Пікірлер: 17
@hinene7 ай бұрын
Thanks for making the video. I was stranded at a rest stop during a family vacation. My car wouldn't start, the blue LED started to blink, and i didn't notice that before. Car got towed to a nearest dealership and didn't want to troubleshoot it. After your video, i was able to bypass the starter cutoff. Spliced the wires and twisted them together, and my car was able to start. POS KARR system. Thanks.
@FriendlyMBTech
7 ай бұрын
You're very welcome! I'm glad it worked out for you.
@miket6119 ай бұрын
Thank you for making this video!! I have wanted to remove this after market gimmick for years! Just did it and it was exactly like this video.
@FriendlyMBTech
9 ай бұрын
You're very welcome!
@emmcee476 Жыл бұрын
Removed it from a 2014 Toyota. Pretty easy. Remove all jumpers and rejoin the cut main power wire together
@timfrancis67747 ай бұрын
heres my story, bought truck alarm went off when we were on test drive brought it home anyway. 3 years later left me stranded several times. have to get it removed somehow i found this video so i will follow it. but, i have some questions if i may, will i need new wires or can i crimp cap the ones that are tied to truck wiring. like say my ignition is full of connections should i just get new ignition wires and such
@FriendlyMBTech
7 ай бұрын
I just had to reconnect the wires. Depending on how it was installed, you may or may not have to graft in some length of wires but I'd be surprised if you did.
@ESNK4437 ай бұрын
Got a 2016 Civic LX had the same exact harness. I’ve removed the entire thing and rejoined the manufacturer power wire back together but I’m still stuck at 5:38. Lights come on but won’t even crank. Any idea what could be missing? I would appreciate any ideas.
@FriendlyMBTech
7 ай бұрын
Check the battery. Check the battery posts and terminals. Clean off any corrosion. Try jumping it or charging the battery with an external battery charger.
@ESNK443
7 ай бұрын
Cleaned them up with a small steel brush.Car battery reads 12.51 V by itself. But no luck. I’m beginning to think this is a programming issue or electrical issue.I had a new key programmed when the KARR harness was installed, then I took it off. Not sure if this could be a problem for the key programming.
@FriendlyMBTech
7 ай бұрын
@abrahamrobledo9682 I was having similar issues and my battery voltage was good also. I put a new battery in it and cleaned the terminals and it hasn't done it since. I have also heard of the alternator causing a similar concern.
@abdonmolina Жыл бұрын
I might need that little flashing light, mine broke
@bernardgelderblom88182 жыл бұрын
Cut and join , some alarm fitters just dont care ...
@FriendlyMBTech
2 жыл бұрын
Especially Honda dealerships.
@expeditionwaypoint72582 жыл бұрын
Did this fix the issue
@FriendlyMBTech
2 жыл бұрын
I did for a while. Then I replaced the module under the dash. That fixed it again. I forget the part number.
@cristian.robles
11 ай бұрын
@thefriendlyneighborhoodtec3727 which module did you replace?
Пікірлер: 17
Thanks for making the video. I was stranded at a rest stop during a family vacation. My car wouldn't start, the blue LED started to blink, and i didn't notice that before. Car got towed to a nearest dealership and didn't want to troubleshoot it. After your video, i was able to bypass the starter cutoff. Spliced the wires and twisted them together, and my car was able to start. POS KARR system. Thanks.
@FriendlyMBTech
7 ай бұрын
You're very welcome! I'm glad it worked out for you.
Thank you for making this video!! I have wanted to remove this after market gimmick for years! Just did it and it was exactly like this video.
@FriendlyMBTech
9 ай бұрын
You're very welcome!
Removed it from a 2014 Toyota. Pretty easy. Remove all jumpers and rejoin the cut main power wire together
heres my story, bought truck alarm went off when we were on test drive brought it home anyway. 3 years later left me stranded several times. have to get it removed somehow i found this video so i will follow it. but, i have some questions if i may, will i need new wires or can i crimp cap the ones that are tied to truck wiring. like say my ignition is full of connections should i just get new ignition wires and such
@FriendlyMBTech
7 ай бұрын
I just had to reconnect the wires. Depending on how it was installed, you may or may not have to graft in some length of wires but I'd be surprised if you did.
Got a 2016 Civic LX had the same exact harness. I’ve removed the entire thing and rejoined the manufacturer power wire back together but I’m still stuck at 5:38. Lights come on but won’t even crank. Any idea what could be missing? I would appreciate any ideas.
@FriendlyMBTech
7 ай бұрын
Check the battery. Check the battery posts and terminals. Clean off any corrosion. Try jumping it or charging the battery with an external battery charger.
@ESNK443
7 ай бұрын
Cleaned them up with a small steel brush.Car battery reads 12.51 V by itself. But no luck. I’m beginning to think this is a programming issue or electrical issue.I had a new key programmed when the KARR harness was installed, then I took it off. Not sure if this could be a problem for the key programming.
@FriendlyMBTech
7 ай бұрын
@abrahamrobledo9682 I was having similar issues and my battery voltage was good also. I put a new battery in it and cleaned the terminals and it hasn't done it since. I have also heard of the alternator causing a similar concern.
I might need that little flashing light, mine broke
Cut and join , some alarm fitters just dont care ...
@FriendlyMBTech
2 жыл бұрын
Especially Honda dealerships.
Did this fix the issue
@FriendlyMBTech
2 жыл бұрын
I did for a while. Then I replaced the module under the dash. That fixed it again. I forget the part number.
@cristian.robles
11 ай бұрын
@thefriendlyneighborhoodtec3727 which module did you replace?