i put the brake callipers on after the wheel is in place. makes the job much easier.

Just a tip you can take the pads out of the caliper when attaching caliper to bracket, easier than taking the rotor off when swapping around IMO + you can check your pads :) Love the bike though, I've got a 2014 WR450SM :)

@dazthecowboy

7 жыл бұрын

main reason i took the disc off was that i found loose nuts when checking the bolts before fitting.. this gave me a chance to lock tight each bolt before final assembly. you can see me adding lock tight as i tighten up the disc bolts in the clip.

Thanks for speeding it up. Looks like it actually took all day! lol Nice bike, nice vid!

@dazthecowboy

4 жыл бұрын

Thanks, all in all it took about 2hrs beginning to end with no knowledge of what i was doing to begin with.

Took at least half hour to fit the front break

@dazthecowboy

7 жыл бұрын

yup. your about right.

@mariapastore9163

7 жыл бұрын

dazthecowboy u

@merc-ota4357

7 жыл бұрын

Will Sherriff break or brake??

@nk0723

6 жыл бұрын

Why tho haha?

@sobashot8804

5 жыл бұрын

Click baiter

80% of the footage was installing the front tire ?

What do you think about which is the best option? to pass to supermotard an XR 150 L or an XRE 300? ... that is a doubt that intersperses the budget but which would be a better option, besides this, this type of bike works well outside the asphalt with street tires? Are they safe in curves and at 120 km / h? im sorry about my english, spanish its better

what should be the supermoto sprocket size compare to the motocross sprocket ??

My grandson one good rider very proud of him

cual es el diámetro de las ruedas que le monto?? Gracias.

You installed your master link clip BACKWARDS. Very dangerous. Trust me...I did the same thing on my '14 WR450F and mine popped off and my chain broke my crank case, ending up as a $1600 mistake.

@dazthecowboy

7 жыл бұрын

Great eye! after the vid i noticed and switched it back around.

Wow only 4 minutes for convert in a motard! Now i modify my Vespa 110 with this video!!

Is there a trick way to slap the rear wheel on because I've been fighting it for 2 hours because the rear caliper won't line up with the axel.

I'm guessing you had to crank the suspension all the way to stiffen the ride? Also, did this lower the front to an uncomfortable level, as you only went down 1or 2 inches in the rear, but 4 in the front?

What rim/ tire combo did you use and can you include the link

Did have to get any extra parts or was it just a simple swap ???

De que medidas son tus rines y llantas y que medida es tu corona y piñon

Todo eso solo para poner la llanta delantera?

don't you have to calibrate speedometer? don't you have to stiffen the suspension? Is the front brake enough considering you ride faster with the new ratio?

@dazthecowboy

7 жыл бұрын

+Kayzox yes, with this model you actually need to replace the speedo as they don't have a mode to calibrate it with. With any change to your bike adjusting the ride setup is needed. I always recommend doing one change at a time so you can feel the difference each change makes to your ride setup. The brakes are better now then on the stock setup.

Do you happen to have the links to the site where you purchased the rims/wheels/bracket? would I have to buy new rotors/chain and sprockets for this build?

Amigo, cuales son las medidas de las ruedas?

Can you please list all the parts you used on this conversion please?

Did the stock chain not have a master link.

"Just changed the knobby tyres to a street ones." -11/10, IGN

i just get a wr540f and wanted to buy road tyres but every where is look the back tyre looks to narrow what tyres did you use and do you think if it is too narrow would it still be good to use

@wazorak

7 жыл бұрын

just fast tip when going for bigger back tyre, make sure it fits between the swing arm and the chain is not rubbing. other than that i hope you find a nice one soon.

@wuzihuzi

7 жыл бұрын

It looks like a 150 to me, you can squeeze a 160 on but probably would have to offset it which is a hassle.

Wheels 3,5 and 4,25 or 5.0? Thanks

Helpful video.. one question: do you have to drop the front rotor out every time? I got the same rotor. Hoping this isnt the case

@dazthecowboy

7 жыл бұрын

no. i found out if you remove the break pads it should fit. i am kinda glad i removed the rotor as it gave me a chance to add loctite to the threads.

Que rodas show Parabéns pelo trabalho Ter $$ e fácil kkk fazer kkk

quedó mal puesto el pin de la cadena.

que medidas de rines son ?...

Hola que referencia son las llantas gracias

Que modelo y marca de llantas usaste?

sweet backwards wheel dude

Why not a 6 pistion front brake? You can brake with your pink with that

Hello 🙂 Size wheels and tires? Hi5 🤛

What measure of spokes does

Besides Jet Luge, can you and Dave build a jet bike?

Hi is the break thing necessary to use the smaller wheels and tires? I would assume yes but this is something I did not consider.

@JustinTwilley

4 жыл бұрын

I ask because Im looking at a decent deal on FB 15 yz450f that has both street wheels and offroad wheels and Im trying to calculate how much more money and work to get it steet legal, hes asking 3500 I believe he said he has the lighting kit probably headlight only, So ik i need mirrors blinkers brake lights tag and registration which I plan on using the Dirtlegal online service for, can you please list the others that id 100% need to get this baby street legal? Thanks for any information!

Saludos como se llama ese estilo de moto me refiero ala modificación de cauchos

Question, is it possible to use the original disc brake and transfer to the motoard tire? that way I would not need that extender thing planning in the future. Thanks

@dazthecowboy

4 жыл бұрын

No. Completely different setups.

Hey mate iv just done the swap on my 2014 wr450 and was wondering how you got the speedo to fit the front mine sits tight to the rim but the axle won’t go far enough through to put the nut on the other side?

@bretthart1019

4 жыл бұрын

And did u have any dramas with the chain hitting the back tire?

what's the tire and rim size?

Классно получилось. Молодец. Сам мечтаю так сделать. Но к сожалению нет возможности.

Boondocks soundtrack for the win.

Quisiera saber la talla de las llantas

Amazing work. Very good. What's the difference between enduro wheels and the sm wheels how much distance on the riding. Keep up

@dazthecowboy

5 жыл бұрын

Thank you. The wheel size is the biggest difference. Sm wheels are much smaller. As you may notice in the clip.

@tostratv8129

4 жыл бұрын

and what kind of sprockets you've got on? 13/46?

What have you done with the speedometer? Is it still the stock one or did you change it?

@dazthecowboy

7 жыл бұрын

At the moment i'm using a GPS speedo. i will change over the speedo eventually. i looked around for dash mods. but there where none that i found would work for this model. i was even told by Yamaha that you can't adjust the dash for this model.

Did you have any issue with the size of the tire? Any modification or some like that?

@dazthecowboy

7 жыл бұрын

Joshua Juanchini none at all.

you put you're chain adjustment black on back wards

When changing tires, the bike lowers its height a bit, right?

@dazthecowboy

4 жыл бұрын

Correct. But not to much.

:v I like , that´s my favorite kind of motorcycle.

@dazthecowboy

5 жыл бұрын

Mine too!

You're only missing the (very important) suspension setup part, which takes a lot of time, or costs money to get done.

what happens if we just change the tyre I really wanna know why we must change hole rim can you explain it to me please?

@dazthecowboy

2 жыл бұрын

The tyre is a different size to the off road rim. Brakes are better than off road brakes. But if you can find a tyre to fit your current time. Go for it. No reason not too.

@dazthecowboy How long did it take you in real time ? Cause i may need to schwitch it for the registration.

@dazthecowboy

7 жыл бұрын

moto swop you could have it done within the hour with the right tools.

@motoswop9678

7 жыл бұрын

alright

could you do the same with a yz450f?

@bobbyg.2886

4 жыл бұрын

You got a yz 450f ??

Whats the size of ghe tires

Great vid man!!!can i use the oem wheel hub then buy the outer rim and make the spokes?

@dazthecowboy

2 жыл бұрын

That's a lot of work for something that would more than likely be more cost effective buying over the counter. You would need to true up the rim and have a spoke key to tune your spokes. I'm sure it can be done. There are many motard rim options out there already though.

@konstantinoskourini

2 жыл бұрын

@@dazthecowboy hey again!what do you mean true up the rim?i have found excel outer rims with like 400€ cause i cant find the complete set up for the crf 300l

@dazthecowboy

2 жыл бұрын

@@konstantinoskourini it means to balance your wheel and adjust your spoke so your wheel has no wobble or slack. If done wrong the results can be catastrophic. If you have little understanding of how to true up a rim I would not suggest trying it on your daily rider. Practice with bicycle rims. You'll see how a couple twists can really put your rim out.

@konstantinoskourini

2 жыл бұрын

@@dazthecowboy i will not do it by myself.the guys at the shop will pair th oem hub with the custom rim exterior and spokes so hopefully they know what they afe doing

que tanto le novia al disco?

Hey , I’m struggling with the rear wheel spacer size , do u have the dimensions for it please

@dazthecowboy

Жыл бұрын

I'm sorry. I no longer have the bike.

what number aros?

@lafbi7352

5 жыл бұрын

en ingles se dise rins los aros amigo

Very cool!

Can you tell me the tires especification?

@dazthecowboy

7 жыл бұрын

Nikolop Lopez I got 17 front and rear. with 150/60 rear tyre and 110/60 front tyre Rosso 3's.

@juancv3700

6 жыл бұрын

dazthecowboy Front is 17, not 16.

Wheels and tire sizes please?

what sizes are the rims, and what tire sizes did you use?

@dazthecowboy

7 жыл бұрын

Denham Wright i got 17 front and rear. with 150/60 rear tyre and 110/60 front tyre Rosso 3's.

Funny have high cost!!. I love motard bike!!!

What saiz u use

Awesome!!!!

in all seriousness how often does maintenance need to be done on these bikes?

@dazthecowboy

7 жыл бұрын

the same as most motorcycle maintenance. just with less washing.

Amazing 😱😱😱

Zises?

You also put the chain lock on the wrong way haha

@markay_

6 жыл бұрын

BLDH thats what i thought aswell xD

@Pluuton

6 жыл бұрын

Saw it too😂😂

@kareldegreef3945

6 жыл бұрын

yup at 3:37 glad i was not alone to see that + i hope he used locktide on those nuts for his front caliper + brakedisc at 0:55 + he should safety wire it too but don't think he did :-(

@gallejugon3350

4 жыл бұрын

I hope he didnt cut a leg.

@lyakhanayra9864

3 жыл бұрын

@@kareldegreef3945 Adele Adele

You just have to speed the time up to make it in less than 5 mins :).

Es cierto puso al reves el clip de union

whats the seat height after conversion? the bike i'm trying to get is at 38, i need to get it down to at least 34.

@jobabram125

7 жыл бұрын

wish i was a little bit taller wish i was a baller

@wuzihuzi

7 жыл бұрын

I wish I had a girl in the hood I would call her

Good job

What size tires and wheels are those, I’m trying to change mine over also

@dazthecowboy

4 жыл бұрын

16 inches

@jamespolucha6911

4 жыл бұрын

16 front and rear? Thanks

@dazthecowboy

4 жыл бұрын

@@jamespolucha6911 yup.

what size of rim front/rear and tyre size?

@ExoticOnTheBeat

7 жыл бұрын

Hazwan Arif both 17" i believe

How much this bike price.....

I tried this yesterday's morning , and was expecting 5 min the latest to complete, but it took me until evening to finish it.

@dazthecowboy

7 жыл бұрын

clearly you needed to work faster.

I don't understand what you did on the fork protectors. Why did you unmount them ?

@shaunh2467

7 жыл бұрын

They rub so you have to trim them down

@dazthecowboy

7 жыл бұрын

Shaun H what he said 😊

@NicolasPetremann

7 жыл бұрын

Thx!

Sry but i didnt understand why he put 2 cables from the front brake

Did you get sprocket compensation on the rear wheel ?

@dazthecowboy

7 жыл бұрын

do you mean a cush-drive rear sprocket? if so, i did. it does take a bit of the power out of the bike. but if you do a lot of road riding it will save your gearbox in the long run.

@lejejzerman

7 жыл бұрын

yes, that's exactly what I meant. Could you tell me, where you bought your cush-drive rear sprocket ? Thanks

@dazthecowboy

7 жыл бұрын

lejejzerman you can get it in the package if you get your wheels through a good retailer. my retailer is in Australia and i had them shipped to me. they should ask you if you want cush-drive or direct drive. i paid for the best wheels and rims available to me at the time. i thought if I'm doing it i should make it worth doing.

Awesome

Maybe you have in Your Country another Time like Germany, but less than 5 Minutes ?? What was aProblem with the Frontwheel? Sheers: Tom

what gearing(if I wrote it right :P ) do you use ?

@dazthecowboy

7 жыл бұрын

KuBuSgamer standard sprocket at the front 43T at the rear. I live next to highways so i wanted a better top end. bike tops out at about 164kph

@dennisthemenace8196

7 жыл бұрын

dazthecowboy buddy you said 184 in a previous comment but whatever

What size your tires?

@dazthecowboy

5 жыл бұрын

16 inches

That front break though lol, for the whole build setup how much would u say u dropped?.

@dazthecowboy

7 жыл бұрын

james sweeney for this setup i got the top of the line gear that was offered. i got a little change from $3000AUD. The front brake it ridiculously awesome.

what is the name of that curvey wheel ? is that for street ? and size if it

@wuzihuzi

7 жыл бұрын

What do you mean? The brake rotor at the front is a 320mm moto master rotor, when they are wavey they are called a wave rotor and MotoMaster I think calls theirs a flame rotor. he is running sm pro platinum 17" rims, gonna guess with a 4.25" rear width.

I want those details of the front & rear petal rotors and that front & rear brake calliper holders as well. Just gimme the link :)

5 minutes of terrifying nightmare making music.

i pass road tires only on street bikes .

''Conversion in less than 5 minutes'' uses 4 and its fast forward ^^

@dazthecowboy

7 жыл бұрын

it is less than 5 mins. never said it was in real time :)

@dennisthemenace8196

7 жыл бұрын

slick slick

How much does the conversation cost? Planing on buying one and make it a supermoto

@dazthecowboy

7 жыл бұрын

it depends on how much you want to spend. you can get a second hand kit for a couple hundred or spend a couple thousand on top of the line. shop around. take your time and go with what best suits your budget.

@TheElectroBeat1

7 жыл бұрын

btw how tall are u? Because i am 170cm or 5.7 and i dont know if i fit on a supermoto

@dazthecowboy

7 жыл бұрын

your height will make no difference. if you can ride you'll be fine. a supermoto usually sits lower than your standard motocross bike anyway.

Hola. Alguien en español, pueda darme las medidas de ambas llantas (gomas)

@Diego_CS

5 жыл бұрын

Hola lo más seguro es que sean unas 120 delanteras y 150 atrás

how long in real time?

@dazthecowboy

7 жыл бұрын

Adventure Riders excluding my stuff ups. you could have it done in less than an hour.

La llanta delantera la pusieron al revés

kapan due motor koyo ngene...

Why can't I find a Yamaha 450 on there website for sale? I can't find a Honda crf450 on Hondas website either. Where is everyone buying these bikes?

@dazthecowboy

7 жыл бұрын

You'd have to take that up with them.

@CitizenJournoTN

7 жыл бұрын

Wow thanks

@huntercarter5426

7 жыл бұрын

KnoxRid3r do you have any approved dealers around you?

@cougar231000

6 жыл бұрын

if you Google "redmoto", on their website you can find new honda crf 450 already on motard setting, i think they are some kind of official Group and for Suzuki Google "Suzuki valenti" and they do the same think for the rm 450 at quite the same price

Price online shoping india

What's the top speed with the new sprocket

@dazthecowboy

7 жыл бұрын

brett Driver I've had it up to 167kph. That's hitting the rev limiter.

@brettdriver4830

7 жыл бұрын

Right on

From 1 litre, how far can it run???

@dazthecowboy

5 жыл бұрын

I get about 80 kilometers to a tank.

@senarathjayantha6539

5 жыл бұрын

@@dazthecowboy thanks 😊😊