Thank you for not removing the oil cap before removing the engine cover. So many other videos show the person removing it, and it’s absolutely unnecessary and can let debris get into the oil.

Short, simple, sweet. Subscribed thank you.

everything described in detail and to the point. excellent video.

Just bought a 2015 200 Limited. Thanks for you channel!

My man joe helped me out my Chrysler 200 💪🏾💪🏾💯

Thank you! Saved me some money 👍

Thanks joe 👍🏽

Good video

Great video!! Quick question - would you recommend changing the ignition coils at the same time even if there are no symptoms of them going bad? With engines that utilize plugs and wires, typically its recommended to change both at the same time, but since the coils are encased in the engine I'm thinking there's no need to replace them if all is functioning property. Thoughts?

@JoesCarSmartsNY

Жыл бұрын

I usually wait for a coil to fail or cause a misfire.

You don't use anti-seize on the spark plug threads?

So the champion Spark plugs work ok? I only see that Mopar are recommended but are much more $$$. Thanks!

@JoesCarSmartsNY

Жыл бұрын

I always replace plugs with the exact OEM plugs. I’m not sure what Mopar would be selling that’s different.

Should I use Dielectric grease? Some channels recommended it and some didn't. What do you think Big Joe?

@JoesCarSmartsNY

Жыл бұрын

A little dielectric grease between the coil and the plug doesn’t hurt. Just a little bit though. Don’t over do it.

@c_money8080

Жыл бұрын

@@JoesCarSmartsNY gotcha. Cool. Thanks for the quick reply

I noticed what looked like oil in the holes between the plugs, ive seen this on other 2.4L. Any idea how that gets therr?

@JoesCarSmartsNY

2 жыл бұрын

Probably a bad valve cover gasket leaking oil around the spark plug tube seals into the spark plug tube.

@JoesCarSmartsNY

2 жыл бұрын

Check this video: 2015 Chrysler 200C 2.4L Valve Cover Gasket kzread.info/dash/bejne/a6KJ07KGmryslKQ.html

Hi. The hose connected to the right side of that metal tube in front of the engine broke off on my 200. It leads to the right side of the engine to a part right to the left below the throttle. Can you tell me what it’s called and what I need to replace it? I can’t find info anywhere. To be clear, there’s a hose that comes from overflow, then it transitions to that metal tune in front of the engine, which theme transitions to another black hose which is what broke at the end of hose

@JoesCarSmartsNY

11 ай бұрын

How about this? www.ebay.com/itm/285221328591?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Jr-yh-w1QEm&sssrc=4429486&ssuid=HmIjt2Q8Q3S&var=&widget_ver=artemis&media=COPY

I really have no idea but just bought a 200c @124k miles and jerk or putt putt a little when braking and accelerating...I don't know much but it seems that it may be the spark plugs according to my last vehicle .. I pray it's nothing serious!

@ramonbarajas2258

Жыл бұрын

Mine does that when need oil change or spark plugs, coils

I read that they supposed to be torqued the plugs is that correct

@JoesCarSmartsNY

3 жыл бұрын

If you have the torque spec and a torque wrench it’s alway good to use the proper torque. I don’t use torque specs for spark plugs because I’ve done many of them and have a “feel” for when they’re properly seated.

@allenrodriguez4255

3 жыл бұрын

@@JoesCarSmartsNY I was using some cheap spark plugs it was a weak idol just put some iridium Bosch ones and it gained all its power amd strong idol i tighten them the way it showed in the video go till ot stopped did a quarter turn worked like a charm

@JoesCarSmartsNY

3 жыл бұрын

@@allenrodriguez4255 Glad to hear it worked out in the end. It’s real important to use the proper spark plugs that the engine was designed for. Now you know it makes a big difference.

Would this also apply for the 2015 Chrysler 200s 2.4 ?

@JoesCarSmartsNY

2 жыл бұрын

Yes. Engine setup is the same. The “C” and “S” are trim levels.

@RJ1ZY

Жыл бұрын

Limited as well I guess?

Do you need to disconnect the - terminal on the battery before replacing?

@JoesCarSmartsNY

Жыл бұрын

No need to.

@jaegreen7620

Жыл бұрын

I saw a video where the guy removed the positive terminal. This guy obviously didn't do it. It seems like it would make sense to remove it. It's electric. Boogie woogie woogie.

Anyone know what that piece that goes over the last two spark plugs is?

@JoesCarSmartsNY

3 жыл бұрын

That would probably be called an “intake resonator” or something like that. It probably comes with the air intake tube assembly.

You forgot to mention that you need a 5/8 magnetic socket to pull the work Plug out the engine valve.

@JoesCarSmartsNY

2 жыл бұрын

Every spark plug socket I’ve ever used has a rubber bushing that grabs the socket. I thought it would be understood.

amazing vide. Can you tell me how often we should change them?

@JoesCarSmartsNY

3 жыл бұрын

Should be done every 100k miles I think. Owners Manual or dealer service manual would have exact information tho.

@AmitSharma-gf4gz

3 жыл бұрын

Hello Joe S. My 200 limted was working awesome till this morning. I didt had any major problem yet I am on 130k+ km however this morning I tried remote start and the car didt got on in first go. When I tried manually then it took 3 sec to start. Do you think I have problem with spark plug?

@JoesCarSmartsNY

3 жыл бұрын

Amit Sharma I’m not sure exactly what you’re saying here. It sounds like you tried to start it with the remote but it didn’t start, then when you tried to start it yourself it took 3 seconds to start. If it was my car I’d try using a fuel injection cleaning additive if you haven’t done that in a while. You’re a little early for spark plugs to be bad enough to cause an engine runnability problem. More likely that you need a fuel system cleaner. Something like Seafoam or a Lucas brand fuel treatment would be good options.

@AmitSharma-gf4gz

2 жыл бұрын

@@JoesCarSmartsNY Hi Joe, Just need to ask suggestion. I have a engine light on scanned OBD error code P0304 Swapped spark plug, coil fuel injector Still have the same code P0304 I then Went for compression test. Have around 150 PSI for cylinder 1,2,3 But 4th cylinder have PSI just 60. I went to Chrysler dealer they said I need a new engine. Just want to know are they fooling me or I do need a new engine?

@JoesCarSmartsNY

2 жыл бұрын

@@AmitSharma-gf4gz That is not good. The low compression is in the same cylinder that the code indicates the misfire. You probably either need an engine rebuild or a replacement engine. If you decide you have them do it you can get a good used engine from a quality parts recycler. The labor will obviously be pretty high for a big job like that but you could save some money on the engine itself. That’s awful. Good luck. Hope it goes good.

I had two codes 1. P300 and 2. P302 any suggestions

@JoesCarSmartsNY

2 жыл бұрын

P0300 is engine misfiring, P0302 is cylinder 2 misfiring. If you’re around 100,000 miles start with new spark plugs. Use only the exact same ones in this video because they are the original part number. If misfires persist you might be needing ignition coils. The car in this video is over 160k miles now on original coils, but that doesn’t mean yours might not be bad. If you’re still misfiring, try swapping cylinder 2 and 4 coils and see if the misfire moves to cylinder 4. If it moves, that’s a bad coil. If it stays at 2 it’s possible you’re dealing with a wiring or injector issue. A cam sensor is also a possible culprit at that point.

@kidnplay2148

2 жыл бұрын

@@JoesCarSmartsNY it’s only at 83k miles it doesn’t have a camera on it but I’ll order the tools and parts and change the spark plugs and see what happens

@JoesCarSmartsNY

2 жыл бұрын

@@kidnplay2148 “cam sensor” = camshaft sensor At your mileage spark plugs are most likely fix.

@kidnplay2148

2 жыл бұрын

@@JoesCarSmartsNY ohhhhh ok thank you so much for responding

Can I do the same for a 2016 Chrysler 200 S?

@JoesCarSmartsNY

2 жыл бұрын

If it’s the 2.4L it should be the same

@TheLastOfTheFinest80

2 жыл бұрын

@@JoesCarSmartsNY Thanks I will let you know if it works out.

Was that a 6in extension you used?

@JoesCarSmartsNY

Жыл бұрын

I think so. They’re in there a bit.

@devinmcdaniel9744

Жыл бұрын

Thank you for the speedy response Joe!

@JoesCarSmartsNY

Жыл бұрын

@@devinmcdaniel9744 happy to help

Do you have a link for the spark plug socket??

@JoesCarSmartsNY

2 жыл бұрын

Here’s one: CRAFTSMAN 5/8" Spark Plug Socket, 3/8-Inch Drive (CMMT43324) www.amazon.com/dp/B07QG4HD1K/ref=cm_sw_r_cp_api_glt_fabc_VHPKR7HKZ9HBQDJEG9WK

@vincentekapusta6514

2 жыл бұрын

@@JoesCarSmartsNY the one you just sent is that the one that works with the 200 spark plug?

@JoesCarSmartsNY

2 жыл бұрын

@@vincentekapusta6514 Yes. It’s a standard 5/8” spark plug on the 200.

Are you able to name these tools for me so I can buy please 😊

@JoesCarSmartsNY

8 ай бұрын

If you are near an auto parts store they will usually loan you the tools. But, if that’s not possible, I just posted all the tools needed in this video’s description for you to purchase from Amazon.

@ladystar993

8 ай бұрын

Thank you

I heve 2016 200 2.4 Replace it plugs en coils, en still Do the same thing

@JoesCarSmartsNY

Жыл бұрын

What’s the car doing?

@tonyhernandez7992

Жыл бұрын

@@JoesCarSmartsNY motor Shaking, en the seid Celine cylinder #1 no good

@JoesCarSmartsNY

Жыл бұрын

@@tonyhernandez7992 Need to do compression test on all cylinders. If you have low compression you need a new engine or a rebuild.

My trim clipper broke bolt broke off

@JoesCarSmartsNY

9 ай бұрын

Are you talking about the plastic clip at the beginning?