A video tutorial on how to remove and replace the engine air filter in a 2015 - 2015 GMC Yukon, Yukon XL and Yukon Denali. This video is for vehicles equipped with the 5.3L motor.
To change the engine air filter in your GMC Yukon you should perform the following steps:
1. Locate the air cleaner/filter assembly on the front corner of the engine compartment on the passenger’s side of the vehicle.
2. Loosen the screws on the cover of the housing and lift up the cover.
3. Remove the engine air cleaner/filter from the housing. Care should be taken to dislodge as little dirt as possible.
4. Clean the engine air cleaner/filter sealing surfaces and the housing.
5. Install the replacement engine air cleaner/filter.
6. Replace the cover and tighten the screws.
How often should the engine air filter be changed in a 2015 - 2020 GMC Yukon?
It is recommended that you change the Yukon engine air filter every 10- 15,000 miles or once a year.
This video tutorial will show you how to remove and replace the motor air filter in the following GMC Models:
2015 GMC Yukon & Yukon XL ( SLE, SLT and Denali )
2016 GMC Yukon & Yukon XL ( SLE, SLT and Denali )
2017 GMC Yukon & Yukon XL ( SLE, SLT and Denali )
2018 GMC Yukon & Yukon XL ( SLE, SLT and Denali )
2019 GMC Yukon & Yukon XL ( SLE, SLT and Denali )
2020 GMC Yukon & Yukon XL ( SLE, SLT and Denali )
More free automotive DIY instructions available at www.ProgramYourRemote.com
Find a Locksmith in your area with www.LocateALocksmith.com