This is a real “how it’s done” video for sure. Thanks for not trying to make it look too simple.

Awesome Video THANKS for sharing.

Thanks for the tutorial sir. I needed this. I am going to be replacing my alternator and both belts on my 2016 Ford F-150 3.5 Ecoboost.

Worth $1000 video,, YES,, watching,, looking is easy,, but at least to a few people,, able to get a grip of it,,, thx so much very useful video....

Great video, and you didn’t drop an F- bomb on any of this! Nice job and keep up the great instructional videos !👍

Thank you very much! My 2020 Transit 350 3.5 Turbo was much harder to get to but this video really helped me. God bless you.

Ай бұрын

Facts I’m having trouble with one right now.

Thank you that was so easy

I went through 10 zip ties trying to walk that ac belt on, 2hrs later i said fu** zip tied it twice on the crank and bumped the key on for a quick second and whalamm belt was installed 😂

Awesome. Thank you

Yeah this is great when things go perfect well my ac belt is not on the compressor pulley it dropped onto the clutch instead now what do I do

would putting the belt on the tensioner last, be easier?

How did you go through the top? Mine has a reservoir and 10 plastic pipes

Thanks for the video! Also did you change the tensioner I herd its recommended when changing belts?

Nice trick thank you 👍

@AutomotiveAuthority

24 күн бұрын

No problem 👍

Thanks for the video! 👍

@AutomotiveAuthority

2 ай бұрын

I'm glad you found this helpful

Awesome thanks !!

Ha. Mines leaking in the same spot. What is it?

Thanks!!!

Never could understand why ford didnt just line the ac up to use on one serpentaine belt. Great video doing this tomorrow.

thanks

For the tensioner pulley, all I need is a regular socket…15 mm

Thank you

@AutomotiveAuthority

2 ай бұрын

You're welcome, glad you enjoyed!

I have a similar oil leak near the compressor.. you know where it's coming from??

@elitem3

Жыл бұрын

it might be coming from the valve cover gasket or valve seals dripping down from the top

I had my belts replaced about 7 months ago and I am getting a squeal when I start up and it goes away after the engine is warm. It is worse on damp or rainy days. Does this sound like a belt is bad already? I would think that if it was a bearing or pulley that it wouldn't go away after the engine was warm.

@AutomotiveAuthority

Ай бұрын

It could be several things causing a squeal and its hard to say exactly what it is. The belt could need to be replaced or the tensoiner could be starting to wear out would be my top guesses. You could also try a belt conditioner spray from a local auto parts store that could also remedy the noise without having to guess and throw parts at it.

56,000 and some how my ac belt is damaged badly. How? No one knows but dealership to high so I’ll be doing it myself

How’d you get the ac belt back onto the ac itself I watched it slip off. Mines same way following this.

@apokalypz08

Жыл бұрын

yup, 4:45 in fact the belt was 'not good', haha

Is this the same process for a 2019 raptor, I just purchased one with some miles and need to replace.

Does the car need to be in neutral or something?

@---ny4ys

10 ай бұрын

No.

Do U know where I can find a good quality 80w led bulb for handlebar light on a 2004 Honda foreman 450es?

This belt change is a LOT easier done if you do it when you change the spark plugs. Remove plugs, do the A/C belt while plugs are out, easier to turn crankshaft. The A/C belt change is not one of Ford's better ideas.

@hidros1461

2 жыл бұрын

Thanks for the tip!

@lard1892

Жыл бұрын

It's not Fords idea...So Ford can't take credit for this stupid piece of engineering

@chadanderson8345

Жыл бұрын

Must be Chevy's idea then?

@OkorieOnesimusUchechukwu

2 ай бұрын

Hi

@OkorieOnesimusUchechukwu

2 ай бұрын

Number

Mileage when you changed it out?

@---ny4ys

10 ай бұрын

Just check your owners manual for service intervals

@73Bdiddy

3 ай бұрын

Service manual says 60,000 mls

Warning, this project can make you cuss! But it's a lot easier on the pocketbook than taking it somewhere

Yahoooo. Ziptie kept me from going crazy and ReDrUmming the fktardedEngineer who designed this.

@AutomotiveAuthority

2 ай бұрын

I'm glad this helped you!

Ok who ever the engineer is that came up with this Chang Wow set up should be dragged buy his sack behind his product I just did one of these turds 💩 today I swear I’ll never I mean never see Another bad belt on a Ford pick up that has this set up

@lucada8538

2 жыл бұрын

The 2014 and up Silverado has the same design

@chekelley6861

2 жыл бұрын

It’s not hard lol

@johnnymack5881

2 жыл бұрын

Lmao, try GM's e-assist.....

@krisgarrison3481

2 жыл бұрын

both belts can be changed in literally less than 3 minutes

@davidevangelista8958

2 жыл бұрын

@@krisgarrison3481 it’s easy once you know the secret the day I did it I was having a bad day