2015 - 2020 F150 Rear Camera Dashcam Install - Rexing V1P - STEP-BY-STEP
Автокөліктер мен көлік құралдары
This video demonstrates step-by-step instructions to hard-wire a dash cam rear camera in a 2015 Ford F150. I install a Rexing V1P Gen 3 dashcam rear view camera (sometimes called a 2-channel dash cam camera). At the end of the video I show both front and rear recordings.
The front (main) camera install can be seen here: • 2015 - 2020 Ford F150 ...
Maybe the links below can help!
Rexing V1P Dashcam: amzn.to/2ymWPxf
If you prefer only a front-facing dashcam: amzn.to/2VkMknf
Star wrench set (this set is also a tamper-proof wrench set...so 2 in one!): amzn.to/2KeEyVy
Kingston Canvas Go! 64GB MicroSD card (recommended by Rexing) : amzn.to/34NbRbL
Aucee hardwire kit: amzn.to/2VFEQKp
Ferrites: amzn.to/34Q78G5
Safe auto trim removal tools: amzn.to/2VENPvr
Circuit tester: amzn.to/3anvVTf
SOG Flash II knife: amzn.to/3as6q3m
Makita drill and driver set: amzn.to/3alhcrR
If you're a Milwaukee fan instead: amzn.to/3by0RkU
Or Dewalt: amzn.to/34S7Wuq
*I am an Amazon Affiliate member, so a small percentage of purchases you make from those links above go to fund this and other videos.
Пікірлер: 20
As the second installment of the wiring to your dashcam you have continued to show excellence in workmanship and instruction. Well done!
Great video! Instead of using the coat hanger, I bought a set of fiberglass wire running rods from Harbor Freight that screw together to create any length you need. The whole kit was only 5 or 6 dollars and are worth their weight in gold! Also, to be able to gain better access to the area above the headliner in the rear seat area, I removed the B pillar plastic mounding. A little more work, but well worth the effort.
This was very helpful!
thanks for the tips...especially the cable routing
Great video!! It was a big help. Thanks!
Great info! I am doing my install this weekend and your video gave me lots of tips to help the install go well. Thank you!
@BrassHorseStudio
3 жыл бұрын
Best of luck! Hope it turns out well.
@tomsdreamshopworx
3 жыл бұрын
Brass Horse Business Ed - I actually installed it this morning took me about an hour total. I’m very happy with how it turned out.
Excellent Video, Very Thorough Explanation, my only issue is I have a Moon Roof, but I think I can still get it done based on your video, Thanks!!!
Very good explanation and details! Thank you :)
@BrassHorseStudio
3 жыл бұрын
Glad it was helpful! Thanks for watching!
Excellent video! Just what I needed, although I am a little hesitant/pull so hard on the liner, it's a "natural" resistant in me even though I know it's fine. Thank you!
Thanks for the video! Looks simple enough. Just got to have patience. Going to install mine tomorrow.
@BrassHorseStudio
4 жыл бұрын
I hope it worked!
@Jsuarez6
4 жыл бұрын
@@BrassHorseStudio Yes it did! Seeing your video first really helped.
That's one hick of an instruction video (specially for people with less car knowledge like me). One suggestion is to use a measuring tape to fish the wire in one go from teh front to the back.
Do you have any video that shows how to do the wiring for an F-150 (King Ranch) with a full length sunroof--2019/2020? Thanks. This was a great video.
Why not just run your fishtape right down the center of the headliner? I would think that would be a lot easier.
@4663David
7 ай бұрын
I think, as Brass said, he was limited to the length of his coat hanger wire. I have a set of the fiberglass fishing rods that screw together. I'm going to try, like you said, when I do mine. I was an electrician in my working days!
$2.17/gallon gas. Oh right, Trump was president then. My how times have changed.