Why didn't you show removing the starter and torque converter nuts? You didnt show making sure to line up the torque converter studs to the fly wheel either.....that's the worst part of the job i think..no room to work!

great job sir and you have a beautiful helper :)

So, I'm working on one of these atm. Glad I found this video.

@kamariagardner6405

4 жыл бұрын

How long did it take you to replace it?

@legacyautomotiverepair6937

2 жыл бұрын

around 6 hours

Thanks for posting. Very educational.

@legacyautomotiverepair6937

2 жыл бұрын

Glad you enjoyed it!

A mention of the torque values would have been nice. Trying to figure out the torque value for flywheel to torque converter nuts

Hello I had a quick question I'm trying to hook up a transmission cooler to my sentra its a 2014. do I hook the hoses up to the transmission warmer?

Hi guys I was just wondering if Can use Castrol Cvt oil, it's ns3 equivalent. The oem brand ns300p is too expensive plus my car is already out if warranty

? After installing the transmission fid you have to clear the obd2 or are there any specific steps before starting the Nissan sentra thanks

Awesome video 🙂

What was the easiest way to remove the starter?

Makes you want to drive a old 70’s model truck. At least you don’t have to disassemble the entire vehicle to work on it!!

@BroadwayLTDProductions

4 жыл бұрын

charles stoffa Hell just to change the radiator fan on these Sentras you have to damn near take apart the entire front end on the car to get the freaking fan out. Late model cars SUCK!!!!!

Mr Allen and Assistant, Thank you for posting this "how-to" vid. I was unfortunate to have been stuck with a 2014 Sentra with a CVT. Bought it used last year and added 60K miles so far. Had the alternator pulley give out and it tore out the belt. Had it repaired at a shop in Baker, CA on my way back from Vegas. The problem now, after replacing the alternator is, the idle speed. It hovers around 750 but dips or rises 250rpm above and below the 750. When it dips the brake and battery lights randomly flash. Also, can you feature a video with step by step on how to completely drain and refill the tranny oil? The dealer charges about $300 but they do use about 14 quarts which is the required amount for a complete drain and fill. Thank you in advance.

what was it thay was done to the car didn't hear anything

How many hours do that kind of jobs and how much you guys charge

Please help me I have this code p0846 my car sentra 2016 is this code than mean replace valve body or all cvt trans. ???

Hello friends! I'm watching the video of your work here from Brazil. I found it very interesting to replace all CVT exchange. I wonder if it is possible to repair this type of exchange instead of replacing it? Here in Brazil it is common repair in Automatic exchange, But I only knew this practice in TipTronics. I found the blonde beautiful in the mechanics. Here in Brazil is not common female presence, Despite already finding women in the profession. But it's rare I already gave my thumbs up and I will subscribe to your channel. Are you in California? I wish a great work for the duo and Brazilian greetings!

Thanks for posting. I was about to purchase a used 2016 Nissan with 41k miles as it looked like a good deal, but was afraid of the CVT since it is not too common. This video and comments confirmed my fear and I will pass on the car. My advice to you is to always wear eye protection and gloves.

Well I came here to watch a nice instructional vid on a CVT transmission, all went well until the blonde came into focus. 🤷🏼‍♂️

There’s a circular sensor behind the dipstick and seems to not want to come free wondering if you have any tips for getting it out

@allencarter5709

4 жыл бұрын

it is a twist lock for wire harness it has lock tabs and twist to remove i had to UN clip and grab with pliers to remove

I was going to ask my 2013 sentra will shake before shifting into 3rd and just recently wasn't shifting out of 2nd stuck going 30 mph at 4500 rpms on the harbor bridge but shfits most of the time it has 155.000 miles thanks so much for video.

@kentonmartin2983

6 жыл бұрын

There isn’t gears

eres un amor

They do make a pair of pliers for the clips

Is it the TCM is the other only part that you need to replaced as well? Any other stuff that we need?

@allencarter5709

6 жыл бұрын

the tcm should just be reprogrammed it does not have to be replaced unless it is not working shorted or something

Thank you for the video. What does it cost to replace this transmission parts and labor?

@allencarter5709

6 жыл бұрын

around $5,200.00 on that one

@joesno4045

4 жыл бұрын

Lmao

@juniorr-v7091

4 жыл бұрын

My friend In California will do it for way less and clean good work for $200-$500 the most guaranteed job

yeah my 2014 sentra's transmission died at about 50,000 miles, it had a 60k mile power train warranty and i took it to a nissan dealership to get it completely replaced. I drove a loaner Rogue for a week lol

Hello, I have a couple of questions. How much money is to do a regular cvt fluid service? Can Castrol CVT fluid be use and how many quarts does it take ? Please and great video .

@allencarter5709

6 жыл бұрын

Thank you it cost at my shop around $150.00 for the service i use 5 qts dont know witch fluid it would take i use only Nissan NS1 or NS2 depend on the year from the dealer it is only 19.99 a qt

@legacyautomotiverepair6937

6 жыл бұрын

Yes we are 912 New York St Unit D Redlands Ca 92374 909-793-2022

@frankc6430

6 жыл бұрын

watch out with the type of oil, now they have the N3 and N2 for CVT ,look at your car recommendations

@papouchemyson4618

5 жыл бұрын

Hi Vic did you ever figure it out

How do you reprogram the transmission/.edu?

@legacyautomotiverepair6937

5 жыл бұрын

you have to have a tool to do it and sign up on websight i have some one come to my shop and do it

I just had my transmission rebuilt on my 2013 Sentra SV I have about 99590 miles on it, had for since 2016, it used to be a rental. but after I got it back the speed sensor wasnt working and I had to almost coast into my driveway...yesterday it was making another weird noise, thinking of getting rid of it now but have a 3 year warranty on the transmission. idk.

How much should a replacement cost? My car's transmission died and im new at this. I live in Texas

@allencarter5709

4 жыл бұрын

Around $4,000 parts and labor

Thx too much , when I test my sentra 2018 on OBD show me P0965 what is problem ?

@allencarter5709

5 жыл бұрын

i dont show that code to new for me sorry

@nategrube352

5 жыл бұрын

If it's a 2018 or should still be under warranty, take it to the dealership

@rahrah8076

4 жыл бұрын

Nate Grube they only cover so much..like $3000

Good clean work. Air operated anything is seeing its last days. electric ratchets and impacts will do a much faster and organized job when you don't have to spin a bolt 10 times by hand.

@BroadwayLTDProductions

4 жыл бұрын

B00steDevil Yeah I do roadside assistance and I have an electric impact for lug nuts. That thing can damn near take off anything as long I am not an idiot and forget to charge the battery. Lol

your intro is way to long bro

@t-bone6864

5 жыл бұрын

Shut the fuck up.

@gilperez3581

5 жыл бұрын

For being a pioneer video on this type of issue, be f***ing glad he posted it. And stop ruining KZread like Gov Jerry Brown is ruining CA, jackazz.

@t-bone6864

5 жыл бұрын

@@gilperez3581 fuck you

How do u get to the flex plate bolts where is the access cover it's the only thing holding me up.

@legacyautomotiverepair6937

6 жыл бұрын

3.Rotate the crankshaft and remove the nuts that secure the drive plate to the torque converter from the stator motor mount.

@death-hs4dh

6 жыл бұрын

Legacy Automotive repair thank u! You are a life saver seriously

@DavidHernandezLOSGATOSAUTO

5 жыл бұрын

@@legacyautomotiverepair6937 im also having trouble finding an access cover to remove flex plate bolts. what are you referring to when u say stator motor mount.?

@allencarter5709

5 жыл бұрын

@@DavidHernandezLOSGATOSAUTO Remove Starter And the flex plate bolt from there

I can’t post a picture on here or I would to ask my question, I don’t know how often you reply but I just have a quick question. If you have a minute.

@allencarter5709

4 жыл бұрын

What is it that you needed send an email to info@legacy automotive repair.com

How did you remove the converter bolts ?

@allencarter5709

6 жыл бұрын

Remove the starter and remove bolts from there

@jahazielavalos1813

6 жыл бұрын

Allen Carter I did and can’t get to them how did you do it

@legacyautomotiverepair6937

6 жыл бұрын

3.Rotate the crankshaft and remove the nuts that secure the drive plate to the torque converter from the starter motor mount.

More dialogue would have been appreciated for us who are not trained mechanics. Otherwise good video.

Do you need to reprogram the new transmission?

@allencarter5709

6 жыл бұрын

i did not because of so low miles on the car but you should have it done with hi miles when you change transmission it is recommended

So the starter stays on the motor?

@jasperjenkins3290

4 жыл бұрын

No...you have to take the starter out....there is also no access hole to unscrew the torque converter ...you can only do it through the starter opening...that is the worst part.....love how he skipped right over that and having to line up the studs on the torque converter to fly wheel when reinstalling....he also removed the radiator but didn't show that either......I'm doing one of these today and I'm 8 hrs in and still have to put everything back together.....

How much fluid did it take

@allencarter5709

5 жыл бұрын

about 4 qts

My 2015 cvt is going out it’s shaking and vibrating when I hit the gas. It only has 50,000 miles, Nissan is making me sick they won’t fix it

@allencarter5709

6 жыл бұрын

this one only had 34k miles on it

@Mabeylater293

6 жыл бұрын

Cali Why the heck did you buy a Renault?? Renault=nissan=JUNK!

Why did it skip the unbolting of the torque converter and how to do all that? Hope you guys make a new video about this because this one sucked!

@legacyautomotiverepair6937

4 жыл бұрын

THIS IS NOT A DIY VIDEO

@michaelmorell7451

4 жыл бұрын

@@legacyautomotiverepair6937 Then it's a HOW TO, or why did you even make it and put it on the internet? Get a clue, how this stuff works. Why would you mislead anyone, EVER!!!!

Damn I'm having transmission problems on my 2013 Sentra and it only has 59,000 mi wtf anyone knows what should I do

@Mabeylater293

5 жыл бұрын

Buy a toyota/Lexus.

@gwendolynjennings3519

5 жыл бұрын

Call Nissan corporate office.They should be able to help you with some of the cost.

@joshb8277

4 жыл бұрын

@@gwendolynjennings3519 I tried no luck. They just decline!

@DavidS-kz7ik

4 жыл бұрын

My 2013 Sentra's transmission is also fucking up and it's got like 65,000 miles. Sucks.

The transmission probably only needed a new valve body. Everybody so quick to want to replace

@legacyautomotiverepair6937

4 жыл бұрын

WELL IT NEEDED A TRANS CHAIN WAS BROKEN WE ONLY REPLACE PARTS THE CAR NEEDS. YOU WERE NOT HERE YOU ARE ASSUMING

I have a 2013 Sentra with transmission issues. RPM needle all over the place. Whinding noise and acceleration issues past 60 mph . May have to go see y'all

@papouchemyson4618

5 жыл бұрын

Alex Orellana. Same here let me know if you find any solution

@Alexinpomona

5 жыл бұрын

Paul Myson I replaced the transmission a few months ago and car running normal so far. Great independent Nissan repair shop here in Pomona ca. Dealer only wants to put you in a new car and not interested in repairing their horrible transmissions.

@papouchemyson4618

5 жыл бұрын

That's exactly what I'm going through. The dealer is not really helping. Thanks I'll try to find a good deal on a new transmission

@KikiNation1

5 жыл бұрын

@@Alexinpomona , what did they charge you for parts (transmission) and labor? Also, was the transmission brand new? My Sentra 2014 SV transmission failed at 40K miles. It was repaired under manufacturer's warranty, so it did not cost me anything out of pocket. But now, I'm scared to hold on to this car since I only have 12 months left on the manufacturer warranty. If it fails again, my car will be worth junk! If I keep it, I would need to find out if it's semi-affordable to fix it (say, under $2K for parts+labor). Otherwise, I just have to cut my loses with this POS car.

@Alexinpomona

5 жыл бұрын

Enrique Garcia well we weren’t as fortunate as you. We forked out 3200 for installation of a rebuild transmission with a 12 k warranty. 3 months later our shifter went bad. Almost four hundred for that. We are gonna drive this car till the wheels fall off or trade. No problems to date and yes we will never touch another Nissan again that’s for sure. The mechanic told us buy Toyota, Honda, and never Nissan. 👌

Very good job but you can see that old man is very strict and tempered so beautiful girl cant comment much on how the gob is done . I have advice for the old man that he should be proud having a girl that can help him on this job which is mostly man profession.

is very sad how mechanics take advantage of people that don't know and replace a perfectly working transmission and install another used transmission or a new one when all it needed was a good atf flush and install a better transmission oil cooler, then they sell your transmission for $1500 ,when the vehicle don't move or drive or transmission is making noises all it needs is the transmission fluid change, I know people that drive Nissan with 200+ miles and they never replace the transmission from factory a simple reading will help you save from 1k to 4k

@eamo94pb

4 жыл бұрын

It's sad when people like you give mechanics a bad name because you're ignorant. Have you ever heard of somebody changing their engine oil to fix an engine knock? ...dont think so. Transmissions are pretty much the same. Been in the trade for some time and never seen a fluid change fix a fucking thing.

@legacyautomotiverepair6937

2 жыл бұрын

well this is a cvt trans and when belt brakes in side with only 36k have to replace trans sorry Nissan make a shitty trans

You could make a pretty penny if you show more of that aesthetically pleasing mechanic helper of yours. She has an incredibly symmetrical face and bold features that could blow this channel up.

@legacyautomotiverepair6937

5 жыл бұрын

really thank you

Why would you take the positive cable off first? Risking an ark that would fry a capacitor in the alternator, I potential resistor in the ECU system. Negative always first and goes nack on last. You're a licensed shop. WTH, basic stuff there. I'm going to continue watching just to see what other mistakes you guys don't care about.

@legacyautomotiverepair6937

4 жыл бұрын

YOU CAN WATCH THE VIDEO BUT YOU NEED TO JUST X IT OUT AND MOVE ON

@michaelmorell7451

4 жыл бұрын

@@legacyautomotiverepair6937 I'd rather completely watch the whole thing and warn others. That was a stupid rookie move. That would blow a capacitor in a 1985 vehicle. With all the sensors resistors and things that are inside computers right now. Any Arc, could screw something up. You need to edit your video fix it. Makes me wonder, how many of your other videos have your mechanic doing the same move?. I have a great relationship with KZread . I'm going to request that these videos be taken down because your steering people in the wrong direction . Ask your mechanic if he agrees with this statement. ( if somebody told one of his customers to do something that was incorrect, he would tell them their proper way) In a split second!!!!

Ana Gabriel

I want a date with the girl.

@legacyautomotiverepair6937

6 жыл бұрын

Sorry she is already taken

How did you replace the torque converter?

@allencarter5709

4 жыл бұрын

You have to remove the starter and access the bolts from the starter hole

@marufzhanzaitov6535

4 жыл бұрын

@@allencarter5709 ok thanks.