Love your video thanks 🙏

How many cost to replace clutch kit?

I’m bout to do this job tomorrow getting ready lol thanks for the vid

@AdrenalineRushMX

2 жыл бұрын

i did mine last week its not that bad

@Fb6_Adrian420

2 жыл бұрын

@@AdrenalineRushMX 2000 Miles later she’s holding strong

Did you replace the pilot bushing too? Doing my clutch but don’t have the tool for it

@vangmotive7023

2 жыл бұрын

Yes, what you can do is order a clutch tool on ebay. Your gonna need it. too aling it into place

@keithoraciona4278

2 жыл бұрын

Okay thank you

MR. VANGMOTIVE I REMOVE MY STOCK CLUTCH TO A STAGE 4 CLUTCH MASTER ON MY HONDA SI 2013 BUT WHEN I FINISH I GO INTO LIMP MODE, WHYT I CN DO TO REMOVE THIS PROBLEM?

@vangmotive7023

Жыл бұрын

If it throwing out random misfire codes. You gotta go into hondata or what ever turner your using and turn off misfire detection.

Does the Clutch Pedal feels Soft or Hard ?

@vangmotive7023

Жыл бұрын

It's slightly harder, with a kick back.

When buying the Kit of the clutch, is it recommended to buy it with the flywheel or can it be without? The difference in the price is huge.

@vangmotive7023

2 жыл бұрын

I believe you can just have your old fly wheel resurface and just use the clutch. But I would get a hold of them and see what options you have.

@josue1983

2 жыл бұрын

@@vangmotive7023 ok, in the agency, they recommend rectifying the flywheel in the case is needed. But I wonder if the kit is completely new, wouldn't it be better to replace it too?

@vangmotive7023

2 жыл бұрын

@@josue1983 I would just replace the flywheel when doing the clutch kit, so you don't have to do it again.

@josue1983

2 жыл бұрын

@@vangmotive7023 Thanks

Does the swaybar needs to come off also? (Not trying to pay $600 for install💀)

@vangmotive7023

Жыл бұрын

You'll just undo it at the end links and let it hang on the subframe. When you drop the subframe the sway bar will be mounted with the subframe. Hopefully this helps

I recently got this same kit. Car cranks right up but won’t disengage to go into any gear. Any input? Car shifts like butter when it’s off so I know it’s not the cables, I’ve also adjusted the cmc to spec. Regardless I’m tearing it back down but I’d like to know what you think is causing this exact issue

@vangmotive7023

5 ай бұрын

So with the car running you can't put into gears? If so bleed your system.

@Deetzat

5 ай бұрын

@@vangmotive7023 we did over and over, gonna give it one more shot though. Doing anything I can before tearing this shit down again

@Deetzat

5 ай бұрын

@@vangmotive7023 what’s the way you did it? If you don’t mind me asking. And without machines what’s the best way to

@vangmotive7023

5 ай бұрын

@Deetzat have someone pump it up 3-4 times and hold it down and you open the bleeder. Do it a couple of times until you get a nice Steady stream.

@Deetzat

5 ай бұрын

@@vangmotive7023 clutch disk was on backwards..

Is it requiered hondata to install?

@vangmotive7023

Жыл бұрын

Not needed.

what grease did you use?

@vangmotive7023

Жыл бұрын

I use Sil-Glyde for the throw out bearing.

Is there any other way to hold the flywheel to take the bolts off ?

@vangmotive7023

2 жыл бұрын

If no impact gun, use a breaker bar and socket and hold it down by the crank bolt. I don't remember if it's a 19mm but sure work

@Fb6_Adrian420

2 жыл бұрын

@@vangmotive7023 okay perfect I have a impact I will try that first if not I’ll do the crank bolt method 👌🏻 thanks for the reply man

@vangmotive7023

2 жыл бұрын

@@Fb6_Adrian420 make sure you Torque the flywheel down and the pressure plate, star pattern.

@Fb6_Adrian420

2 жыл бұрын

@@vangmotive7023 for sure got the Torque wrench ready

Did you need hondata for the clutch system

@vangmotive7023

2 жыл бұрын

nope. had not issue with it

@BoostedFB6

2 жыл бұрын

Only need Hondata for the light weight flywheel. This one is lighter than stock but not the “lightweight” option

Hey should I put a stage 3 action clutch on a stock si? 2014

@vangmotive7023

2 жыл бұрын

It just depends on your future goals with the car. If you do plan to turbo/supercharge than yes it's fine, N/A bolt on go with stage 2.

@ogjhernandez2537

2 жыл бұрын

@@vangmotive7023 I do plan on going sc but properly not anytime soon

@vangmotive7023

2 жыл бұрын

@@ogjhernandez2537 you should be ok with the stage 3 than, the clutch will be a lot heavier at the foot peddle if you do plan on daily your vehicle, just heads up.

@ogjhernandez2537

2 жыл бұрын

@@vangmotive7023 yes I do daily my car Where do you stay at you think I can take it to you?

@vangmotive7023

2 жыл бұрын

@@ogjhernandez2537 I'm out in Kirkland washington

Do 8th gen clutch kit fit 9th gen?

@vangmotive7023

Жыл бұрын

I believe they are different, you'll have to check with the parts manufacturer.

@oscarjsm24

Жыл бұрын

@@vangmotive7023 whats the part number on this kit bro? Thanks!

@vangmotive7023

Жыл бұрын

@@oscarjsm24 08240-HRC6-SK Fx 400

I'm surprised it didn't go into limp mode due to the lighter flywheel. That happened to a friends car.

@vangmotive7023

2 жыл бұрын

that's kind of odd that it will go into limp mode. what lb fly wheel did he go with?

@BoostedFB6

2 жыл бұрын

That’s because you need a Hondata flaspro for a lightweight flywheel. Need to turn off knock detector

@worldtech388

Жыл бұрын

HEY BRO WHAT THE DID TO REMOVE LIMP MODE ?

@worldtech388

Жыл бұрын

@@vangmotive7023 HEY BRO WHAT THEY DID TO REMOVE THE LIMP MODE , MY CAR IS IN LIMP MODE NOW ,

@fabianbarrientos6775

8 ай бұрын

@@vangmotive7023 I have the same problem. What can I do?

Everything fine then the clutch cover doesn’t go on😑

@vangmotive7023

Жыл бұрын

That doesn't sound good, make sure you rotate it around to make sure.You didn't test fit it on before you do the install?