Your video helped me i went through so many till i find found yours man i was kinda stressing doing it myself i watched your tutorial and its right on..thank u
@joeyanderson59879 ай бұрын
Thank you for the video.
@lar-cisleg90295 жыл бұрын
Great video. You’re going to help me change mine lol, you should’ve shown putting it back together. That’s where most people struggle.
@1krharris1
5 жыл бұрын
It was super easy..I just should have taken the speed sensor off before I removed the bearing..
@lar-cisleg9029
5 жыл бұрын
Thanks, another heads up from Kevin Harris!
@19gaming88 Жыл бұрын
Glad yours came out easy. My hub is totally seized up. Going to have to make a game plan Other than that it’s a pretty easy job.
@ronniehedges79565 жыл бұрын
Replaced mine and now my brake light and skid control light is on. I did like you said and took out sensor before I put in new wheel hub.
@1krharris1
5 жыл бұрын
It may not be connected or you probably broke it
@coolnessmortezchannel9216
5 жыл бұрын
My guess dude is that you were probably most likely supposed to take out speed sensor out first before taking out the hub just a guess I only say this because I’m about to replace mine and don’t want to run into the same problem
@KR-go4yx4 жыл бұрын
Good vid.. but remember Righty tighty lefty loossie.. lol.
@Bartetmedia Жыл бұрын
Looks like you forgot to put the plate back first 7:21 Lol! I hate when that happens.
@Jzak255 жыл бұрын
thanks for the vid kevin, where did u get your wheel-bearing hub from?
@1krharris1
5 жыл бұрын
Auto Zone..
@Jzak25
5 жыл бұрын
thanks!!! @@1krharris1
@truechristianity745 жыл бұрын
I know one of my front wheel bearing hubs or bad should I just replace both or just the one
@1krharris1
5 жыл бұрын
Both.. it's not hard and if one is bad then the other is right behind it
@truechristianity74
5 жыл бұрын
how would you know if its the back ones also cause when I drive on the highway I can hear a humming noise that gets louder the faster I go but it seems to be coming from the front with it be the same from the back
@1krharris1
5 жыл бұрын
You can hear if it comes from the front or rear.. but it's most likely the front.. remember to take the speed sensor out as well as I stated in the vid...
@truechristianity74
5 жыл бұрын
@@1krharris1 Thanks
@guillermovargas82595 жыл бұрын
would the process be the same with a 2011 model?
@1krharris1
5 жыл бұрын
I really have the slightest idea.. but the process is basically the same on most vehicles..
@randyyazzie82512 жыл бұрын
Hello is it the same on 2019 model???
@edwinrivera81214 жыл бұрын
What happened to the skid plate???
@truechristianity745 жыл бұрын
I have a 2013 s model 2.5l
@felsig14 жыл бұрын
Great tutorial. Do you have a part number? Or do you 29 or 32 spindle?
@escoszickest4 жыл бұрын
What symptoms were you having?
@1krharris1
4 жыл бұрын
The faster the car was driven, the louder the sound... it sounded like we were in an airplane.
@goodfellasinc.56482 жыл бұрын
LOL.. ARE YOU SURE YOU KNOW what YOUR DOING....
@1krharris1
2 жыл бұрын
Well... do it yourself sir..i never claimed to be this master tech..i was just trying to help.. sometimes that help comes from knowing what NOT to do..
Пікірлер: 29
Your video helped me i went through so many till i find found yours man i was kinda stressing doing it myself i watched your tutorial and its right on..thank u
Thank you for the video.
Great video. You’re going to help me change mine lol, you should’ve shown putting it back together. That’s where most people struggle.
@1krharris1
5 жыл бұрын
It was super easy..I just should have taken the speed sensor off before I removed the bearing..
@lar-cisleg9029
5 жыл бұрын
Thanks, another heads up from Kevin Harris!
Glad yours came out easy. My hub is totally seized up. Going to have to make a game plan Other than that it’s a pretty easy job.
Replaced mine and now my brake light and skid control light is on. I did like you said and took out sensor before I put in new wheel hub.
@1krharris1
5 жыл бұрын
It may not be connected or you probably broke it
@coolnessmortezchannel9216
5 жыл бұрын
My guess dude is that you were probably most likely supposed to take out speed sensor out first before taking out the hub just a guess I only say this because I’m about to replace mine and don’t want to run into the same problem
Good vid.. but remember Righty tighty lefty loossie.. lol.
Looks like you forgot to put the plate back first 7:21 Lol! I hate when that happens.
thanks for the vid kevin, where did u get your wheel-bearing hub from?
@1krharris1
5 жыл бұрын
Auto Zone..
@Jzak25
5 жыл бұрын
thanks!!! @@1krharris1
I know one of my front wheel bearing hubs or bad should I just replace both or just the one
@1krharris1
5 жыл бұрын
Both.. it's not hard and if one is bad then the other is right behind it
@truechristianity74
5 жыл бұрын
how would you know if its the back ones also cause when I drive on the highway I can hear a humming noise that gets louder the faster I go but it seems to be coming from the front with it be the same from the back
@1krharris1
5 жыл бұрын
You can hear if it comes from the front or rear.. but it's most likely the front.. remember to take the speed sensor out as well as I stated in the vid...
@truechristianity74
5 жыл бұрын
@@1krharris1 Thanks
would the process be the same with a 2011 model?
@1krharris1
5 жыл бұрын
I really have the slightest idea.. but the process is basically the same on most vehicles..
Hello is it the same on 2019 model???
What happened to the skid plate???
I have a 2013 s model 2.5l
Great tutorial. Do you have a part number? Or do you 29 or 32 spindle?
What symptoms were you having?
@1krharris1
4 жыл бұрын
The faster the car was driven, the louder the sound... it sounded like we were in an airplane.
LOL.. ARE YOU SURE YOU KNOW what YOUR DOING....
@1krharris1
2 жыл бұрын
Well... do it yourself sir..i never claimed to be this master tech..i was just trying to help.. sometimes that help comes from knowing what NOT to do..