And people wonder why their cars don’t last long. People take care of your cars & they will take care of you.

I really appreciate how you didn't address the issue in the title of this video at all. That's super helpful

@RANS87IROCZ

5 жыл бұрын

That's cause at the time I was trying to fix the customer decided not to, had they did I would posted my results of what it was on this one, sorry

It's scary, how many people have absolutely no clue. Buy it, drive it, replace it., Etc.

I have exactly the same problem with the same car of the same year just bought at a dealer, what is the solution?

video of sensor location is on my channel if needed

Came across this vid, have the exact same problem, did you ever sort it out??

@RANS87IROCZ

5 жыл бұрын

I wanted to install sensor but they declined and never even fixed it

I just have that code p0017 on a 08 Cadillac CTS 3.6 just bought it , had oil life 5% then reset it its now on 75% oil life haven’t changed oil. I’ve cleaned spark plugs , air filter , noticed a rubber ignition coil boot has partial tears and was stuck to spark plug had to use needle nose to take out

@RANS87IROCZ

5 жыл бұрын

yeah , doubt oil change will help, only reason I say it on this vid was the owner of this car bought it new and after all this time, this was it's 1st oil change! Not good, And my answer to your issue is not good! Cadillac possible needs timing chain replacement! for the chain has stretched and cam and crank are off timing as a result causing this code for you? I hate to say a sensor prob won't fix it either, how many miles? I'd say you can try new cam and crank sensor but chances will be you need timing chain replaced

@roelnavarro88

5 жыл бұрын

Ima try a motor flush and oil change heard couple say dirty oil will cause this cAuse of sum screeen filters in motor through the oil pump

@roelnavarro88

5 жыл бұрын

Had couple beers lol my bad just read how I put the the sentence lol I research a lot most peeps say it is timing chain guides, or chain stretches, or camshaft acuator, sum said they changed all chain, solienods , n still check engine.

@RANS87IROCZ

5 жыл бұрын

very true on engines with cam exhaust/intake variable timing solenoid sensors, why it is important not to let oil gunk up like this, But if changing oil and sensors don't fix it though it's an issue in the timing correlation at worst depending on miles, it could be out of sync from timing chain stretch

@roelnavarro88

5 жыл бұрын

Yeah hopefully it’s not that , mine has 167,000

My daughter has a 2014 veloster I change the oil Ebert 3k with mobile and it's still sludge

sea foam works wonders man. how'd that engine flush work ?

@RANS87IROCZ

7 жыл бұрын

skulledmonte84 we started off adding seafoam and also this. but even with both it was still pure molasses like man I have never seen a near 4 year old car with 30,000 miles this gunked up inside

@RANS87IROCZ

7 жыл бұрын

skulledmonte84 fresh oil change didn't help the code issue so next vid to come on location and what I do for it IDK but needs a miracle lol

@DrPiterarnett

6 жыл бұрын

put foam in you ass idiot ,

@ransauto8748

6 жыл бұрын

lots of foam there

I have a 2015 kia forte with a 1.8 that has a p0017 code The engine runs fine with no codes and then when the engine warms up you can see The exhaust cam phasers not keep it's required position on the Scan tool then you see that the engine will start to stumble and die you have to keep your foot on the gas peddle to keep The engine running and you can see the Scan data for the intake phaser it keeps it's required position The person who owns The car did put lot's of oil in the engine about 6 mounths before this incident and The engine does have 130k on the odometer. I am going to change The exhaust cam phaser and that should fix The code and the stumble of The engine.

@xxgetmoneywsxx

2 жыл бұрын

Did it end up fixing it chasing same issue

Cam phaser perhaps

At 61 years of age and owning a used car dealership for 36 years, I could see the righting on the wall, when Kia and Hyundai were pushing out these cars to anyone with a pulse." You just cant fix stupid". A 2013 Hyundai Elantra in this condition now is virtually a total loss. Just look at the inside as well. Could you imagine what there house, Scratch that. (apartment) looks or even smell like. Reason I'm ranting, Just purchased this exact same vehicle with same issue. Paid $2,000.00 for a 2013 vehicle with code P0017. Used Seafoam to flush the motor. Replaced oil with Amsoil Signature synthetic 5w-20w. Problem solved

@RANS87IROCZ

5 жыл бұрын

I wasn't sure if the oil was the issue but knowing how bad it looked I knew it didn't help, I tried to start by doing the oil change and flush to see but had no luck. Just horrible to think how gunked up this new engine was and your 100% right! Imagine other

@hardinautosalesllc

5 жыл бұрын

@@RANS87IROCZ you might have to replace the timing chain tensioner or tensioners due to insufficient oil pressure or blockage.

@AdamConstantine

4 жыл бұрын

Liquimoly engine flush is the best you can get.

First time I hear somebody pronounce it "Hi-onda"

@RANS87IROCZ

6 жыл бұрын

lol, I always have just me, my old boss use to say it right to me and say Hyundai like Sunday or Monday man

Is the crankshaft position sensor on the bottom of the car? where exactly is the location if you don't mind.

@RANS87IROCZ

7 жыл бұрын

HamVaj he never brought it back to me for sensor yet so not sure off hand

@HamVaj

7 жыл бұрын

RANS87IROCZ ok thanks

@RANS87IROCZ

7 жыл бұрын

It came back today, I found it do you need vid on location still

@HamVaj

7 жыл бұрын

RANS87IROCZ thanks I found it

@RANS87IROCZ

7 жыл бұрын

HamVaj okay cause it's back I uploaded video on location, looks pretty fair to do

daughter same car. went on road trip 400 miles 5 from home car dies. low on oil code p0017 add oil car ok. boy friend did oil change didn't have enough. told here to drive it. a diesel mechanic, tire man and business owner. did a have ass job. oil oil oil

@RANS87IROCZ

7 жыл бұрын

Joseph springer yeah I just couldn't believe how bad this was for the milage, it was to late for an oil change didn't solve the problem for it but yeah checking and changing the oil is vital awesome hers was okay

Had the same code and symptoms with pork. Acceleration and car would turn off periodically at lights. Replace both intake and exhaust and check engine light came on 2 minutes after car restarted and reading the same code again. What else would it be?

@RANS87IROCZ

Жыл бұрын

Hate to say the worse, but timing belt or chain has stretched just enough or the tensioner and chain guide has worn enough to throw the code, or a pin on new sensor is bent and skipping it in the wire harness, I've done it a few times, plugged the wire back to it but bent a pin and didn't realize it

@jarthe3

Жыл бұрын

@@RANS87IROCZ anyway to check? Funny thing is the car besides the code popping up seems to be running much better now and the lag on acceleration seems to be gone

@RANS87IROCZ

Жыл бұрын

How many miles? And do you know if it ever had the timing belt or chain serviced also? Other worse scenario would be electrical like issue at the computer but more so rare

@jarthe3

Жыл бұрын

@@RANS87IROCZ The car has about 130,000 miles an hour and the code has been on there since about 110,000. I've owned the car since 50,000 mi and at 90,000, mi. It had a full service including transmission, timing, check off fluids and stuff for changed spark plugs etc

@jarthe3

Жыл бұрын

@@RANS87IROCZ Guy said since I changed out the VVT solenoids earlier today, it seems to be driving much smoother. My main problem before was poor acceleration, especially at low speeds from a stop. It wasn't terrible when I was already cruising at like 40 or 50 miles per hour and maybe once every couple weeks when I come up to a stop sign of red light it would lose power and then I would just turn the key and it would start right back up

Hello same issue as mine.... came to shop cant start throw code P0017 timing correlation this engine new overhaul, i open timing cover timing is right. Change new crank and cam sensor still same. New oil also still same. Do you have any idea sir.....

@RANS87IROCZ

5 жыл бұрын

Check the wiring if can with power prob and see if it lost ground or connection, or follow the wiring making sure no breaks anywhere, not sure but assuming location and knowing you have timing cover you still can't see the sensors or reluctor ring, but could be that internal ring is messed up, that's rare. But anything is possible and if timing is out the slightest it will cause this code so you are in right direction though pain in the ass to go all through just to find out its okay, but if you rule out timing and the sensors only other is the wiring and that ring inside

@laurenceleeroceta8772

5 жыл бұрын

@@RANS87IROCZ ok sir thank you for the advice.... now 12 oclock already here time to rest and eat launch.... i will after rest time. Jus subscribe to your channel. Once again thanks for the quick responce. Laurence.

@RANS87IROCZ

5 жыл бұрын

@@laurenceleeroceta8772 thanks I try to, same time here for me. But sadly this guy didn't want to fix issue with light instead wanted to go back to dealer IDK but I might of had a chance to figure this out to actually help people with an actual answer of main cause, praying you figure it out