These have aged well. Love the sedans. Price wise, they're approaching what people are selling 90's honda chassis for. Hard pressed to find another car in the price range that offers practicality, motorsports roots, cost of ownership and reliability

@joebarra1010

Жыл бұрын

I’m going to drive mine until it’s not worth anything and I’m not that mad about it

@toubielo8788

5 ай бұрын

I’m looking for buy a 9th gen 14 or 15. Since yes, good old Hondas cost just as much.

@doctajuice

5 ай бұрын

​@@joebarra1010same. I've had my '12 si for about 8 years now and have no motivation to get anything different. Very slightly modified, still reliable. It's a great car

Wow, probably my favorite 9th gen I've seen, so clean and well done.

@shadtography

Жыл бұрын

Thank you, I appreciate that.

@connorwilburn2734

Жыл бұрын

@@shadtography No doubt, saw you had an S2000 as well. Think I might pick one up soon too to combo with the civic, that thing is clean too.

@adonisramirez3042

Жыл бұрын

😿

The in cabin noise with that exhaust setup is near perfect, such a great tone

@shadtography

Жыл бұрын

Thank you! I actually went through 4 exhaust systems on the car until I was satisfied. This setup does not disappoint!

@igiooo4327

Жыл бұрын

@@shadtography thoughts on the full race exhaust?

@shadtography

Жыл бұрын

@@igiooo4327 sounds good

Beautiful 9th bro 👍🏾🔥 and 10 years with her??? Never let her go!

@shadtography

Жыл бұрын

Thank you!

@shadtography

Жыл бұрын

@@SarcasticComments23 it's for sale lol.

@drizzy9572

Жыл бұрын

@@shadtography y

@jgtbonem4

11 ай бұрын

Still have mine also. I want to do some more to her though. 😍 looks good man!

@elianaramirez4051

8 ай бұрын

🇻🇬

10 years and 100k miles on mine, agree super fun to drive although not the fastest and super reliable

@kingkdot9789

Жыл бұрын

It’s not super reliable or is?

@elleris9298

Жыл бұрын

@@kingkdot9789 I own one. Very reliable. They are pretty slow.

@prodyung829

Жыл бұрын

@elleris9298 lol my friend has a intake and cat back one. Dude it's so slow but fun 🤣love the little car super reliable.

Car sounds really good. Love the oem+ look of it too 🔥

love the mph blur

Nice build bro, sounds and looks amazing!

@shadtography

Жыл бұрын

Thank you!

Not often do I see a 9th gen on 17x9's, and on the proper tire profile too! Usually, when I see a 9th on 17s it's always 235/45 or 245/45 and it always looks so ugly. Props to you, hopefully she see's another 10 yrs with you!

@shadtography

Жыл бұрын

Thank you for the kind words!

found this posted on the facebook page , glad i did man such a solid car and your exhaust setup is amazing!

@shadtography

Жыл бұрын

Thank you

I remember meeting at LIJ hospital not too long back. I had the white two door 9th gen. It’s crazy I’m stumbling across your video now!

@shadtography

Жыл бұрын

Thank you for watching man!

Clean build man! Love it.

I’m currently looking for a 2015 Si!

@shadtography

Жыл бұрын

You will not be disappointed. I would enjoy it in stock form then get a catless downpipe, catback exhaust, flashpro and tune. It will be a completely different car. If you end up adding suspension components like a high quality coiliver setup and a larger rear sway bar with some sticky tires, handling will be an animal.

this is pretty much exactly what i want done to my 2012 coupe, different wheels obviously lol, i already have an intake and yonaka exhaust, cant afford to do anything else but thisssss is the perfect honda

Solid Build! Man ! I own one barely modified. Sound sweet 🔥

@shadtography

Жыл бұрын

Thank you!

clean! love the sound!

Nice 😍

Really clean set up mate, do you have a rev match device/tune or do you do it yourself? they are crisp!

@shadtography

Жыл бұрын

Thank you man. Rev match on this car is all the driver, no tune or a special device for it.

Car look stunning bro awesome taste

Very clean build!

@shadtography

Жыл бұрын

Thanks!

Nice video bro I'm also first owner of 9thgen love the Volks

Love the vid dude! I just got a 2015 si, planning on keeping it stock for now then might go a similar route, love how you did yours. Did you have any trouble with the rear lip or the coupe one fits even on the sedan?

@shadtography

Ай бұрын

It was a trimming/test fit type of process. It didn't fit perfect

Builds like this are so clean to me now. I want to buy some wheels for my 10thgen I was a stance boy cambered wheels guy now i want a comfortable ride height with a meaty tire but idk what to run. Really wish i had money for te37's

Thing is clean bro nice build

love it,so clean🔥

@shadtography

Жыл бұрын

Thank you!

hey bro I loved your si build was wondering how u got your OEM rear HFP civic si coupe lip to fit?

@shadtography

Жыл бұрын

Hey man, thanks for the kind words and thanks for watching. You need to trim the rear lip to make it fit. It's going to be a 80--85% fit at best unfortunately. Check out 9thgencivic.com, they have a thread about it somewhere

Excellent video, thanks for sharing, a query how much is the average fuel consumption of that vehicle? thanks. Excelente video, gracias por compartir, una consulta cuanto es el consumo promedio de ese vehículo de combustible? gracias

@shadtography

4 ай бұрын

27-32mpg

so clean. might have to get those side skirts

@shadtography

Жыл бұрын

Thanks. Go for it!

@drewelry

Жыл бұрын

@@shadtography are the hfp rears just the normal coupe ones fitted on? or are they custom

@shadtography

Жыл бұрын

@@drewelry oem hfp civic SI coupe rears, needs modification for it to work. Look it up on 9thgencivic.com. Plenty of info there!

What gopro are u using? Very nice car!

@shadtography

Жыл бұрын

Hero 8 black, thanks!

Sorry for questions about your wheel specs because I know a lot of folks like to keep their secrets which is fine but what offset are you running? I’m new to the car scene and fairly new to the 9th gen community and I love the setup. I want the same/similar summer wheel setup hehe. Thanks for the build walk around. Beautiful car sir.

@shadtography

10 ай бұрын

Wheel specs are 17x9 +34 with 245/40/17 tires. Fenders are rolled and I was running -1.5 camber front, -2.8 rear camber

@nicolasm8615

10 ай бұрын

@@shadtography wow! More than I expected. Thanks for the info man! Inspiration. Want my 9th gen to be as clean as yours 🙏

vibrant exhaust exhaust system rb6 cattless downpipe, hawk hps brake bades, fks racing, icon motorsports front lip,

sweet honda

@shadtography

Жыл бұрын

Thank you

Ay man clean build! I have myself a 2013 Si Coupe and I was wondering where did you get that spoiler from because the 2013 coupes don't have them factory. Thanks man!

@shadtography

5 ай бұрын

The civic si sedans came with them from the factory.

Geeeez when you started to press down the gas pedal I didn’t expect it to sound and get so aggressive. Im thinking of trading in my 09 civic ex for an si, but I want good MPG my question would be, whats your average MPG and how many times per week do you fill her up etc.

@shadtography

Жыл бұрын

If you drive conservative, the car can achieve 29-31mpg with highway driving.

@elleris9298

Жыл бұрын

I usually have a bit of fun while driving and get between 26-30

Beautiful car, I’ve got same color combination between wheels and body. But mines a 2015 coupe. Also if it is ok to know, what wheel specs you have and did you rolled your fenders?

@shadtography

Жыл бұрын

Thank you. 17x9 +34 with 5mm spacers. Fenders are rolled.

Question regarding your exhaust setup: what diameter are the parts? From what I found everything is a different size. The RV6 pipe is 2.5”, the Q300 tubing js 2.75”, the vibrant 1042 is 3” inlet, and the vibrant resonator is 2.5”. Don’t all of the diameters have to match in order to be welded together? Thanks!

@shadtography

Жыл бұрын

I believe the q300 piping is 2.75" but flanges were 2.5". The vibrant was fabricated by an exhaust shop with couplers/step downs I believe.

@RobloxCarGuy1

Жыл бұрын

@@shadtography gotcha. Thanks for the response!

Fresh civic

@shadtography

Жыл бұрын

Thank you!

Been following your build for awhile man ever since you debut the Ikon motorsports front lip, still one of the cleanest 9ths till this day! Aside from your exhaust set up, still have the stock intake?

@shadtography

Жыл бұрын

Thanks man. Yes, stock intake!

That K24

What exhaust did you say that you were running on the car????

@shadtography

Жыл бұрын

RV6 catless downpipe, invidia q300 piping with a vibrant resonator and vibrant muffler

It looks so cute 😭

Just ordered a set of Morimoto XB LED Fog lights for my 2015 Civic SI Sedan FB6. Details on installing yours & how they work please.. Thank 👍 you!

@shadtography

5 ай бұрын

You have to trim sections of the back of the fogs. The plastic bits that are pointy I believe. Then it will screw onto the existing fog light mounting points.

off topic have you heard of any good coilovers for a 9th lx civic? I want to preserve the comfort of the car, just wanting to lower a bit. thank you man. also, what do you think of the sedan coupe custom hybrid bumper. do you think you would ever do that?

@shadtography

Жыл бұрын

I'm not sure about the lx, I would research on 9thgencivic.com. I don't plan on changing the bumper at all. The hybrid sedan/coupe bumper is cool though. My friend Gabe has it.

Hey nice setup. What is the bulb type for those projector headlights!!

@shadtography

Жыл бұрын

There's 4 different bulbs in the headlight, which one are you referring to? Low beam = H11, High beam = 9005, Inner turn signal = 7440, Outer turn signal = 168/194. Please double check on 9thgencivic.com to confirm the sizes for UAE headlights.

bro was trying to hide the over speeding😂😂

@shadtography

Жыл бұрын

"Filmed in Mexico ☠️"

Very nice dude. I really like the rain guards at the top of your windows. What brand are they?

@shadtography

Жыл бұрын

Thank you, these are OEM Honda 2013 civic sedan door visors

@alphaacid9043

Жыл бұрын

@@shadtography Okay great! Thanks man

Hi I love your build and want to try and do a little something with mine as well, I have a 2015 ex sedan and are interested in the rear lip you have for your car. But I can’t find it💔Is there anyway you could post the link for it?.

@shadtography

Ай бұрын

It's discontinued, need to find a set of the coupe hfp (Honda factory performance) si rear lip from 2012-2013 models and modify to fit the Si sedan.

Did you order the alcantara steering wheel or did you just get it wrapped? I’ve been looking for one but have only seen the wrap. Thank you

@shadtography

Жыл бұрын

I ordered it and paid for a new core so I can keep my stock steering wheel. Everything from sourcing the wheel to have it refinished and shipped was done by Sweidit.

What are the Wheel Specs / Wheel Size (offset and width)

@shadtography

Жыл бұрын

17x9 +34, 245/40/17

@MarioHernandez-rt4sb

7 ай бұрын

Got it

Set up is so clean 🙌🏽 do you mind if I ask you the specs on the wheels?

@shadtography

Жыл бұрын

In the description, 17x9 +34

@lancelot5593

Жыл бұрын

@@shadtography my bad I didn’t check it, thank you

@shadtography

Жыл бұрын

​@@lancelot5593 no worries at all

Every time you went over 60 you blurred the meeter 😂

You think the prices will drop? Seen one for 20k with 60k miles. Dont know if i should eat the cost and get one.

@shadtography

Жыл бұрын

Mine is actually for sale with all modifications (no te37).I think that's a good price for 60k miles. Mine has 105k miles and I have it up for 17.5k

Where you get the rear lip from ???!? I wanna convert mines like that

@shadtography

Ай бұрын

I bought it used from an eBay seller. OEM is difficult to find now from my understanding. Replicas are out there, not sure about the fit on those

Nicee nice

does the civic si have spot weld like civic type r (fd2r)?

@shadtography

Жыл бұрын

Not sure, might be a Google question lol

How did you do the rear hfp lip ? Heat molded?

@shadtography

Ай бұрын

Yes, wasn't a perfect fit.

Hey bro . The rear sway bar . Has that improved your handling ?

@shadtography

Жыл бұрын

Yes. Must have.

@white9th193

Жыл бұрын

@@shadtography did you install yours with load ? Or jus jacked car up and installed like that . I have the same rear sway bar waiting to get installed .

@shadtography

Жыл бұрын

@@white9th193 I had my buddy install everything (coils + rear sway bar)

@MarioHernandez-rt4sb

7 ай бұрын

What sway bar measurements

where'd you buy the steering wheel at?

@shadtography

Жыл бұрын

Sweidit, message them on facebook

How many miles you have now ? And how is it maintenance wise?? Im picking up a 2013 si soon with 180k miles stock its whole life.

@shadtography

Жыл бұрын

About 105,XXX miles now. Still reliable and maintenance is a minimum.

Are the side skirts you have also compatible with the 2012 coupe si

@poisonskating3702

Жыл бұрын

I love the steering wheel to man I gotta know where I can get on for myself

@shadtography

Жыл бұрын

Side skirts only fit sedan based on my understanding. Steering wheel is from Sweidit.

hey boss does your downpipe hiss when driving?

@shadtography

Ай бұрын

Yes, normal

How'd you apply the rear spats?

@shadtography

4 ай бұрын

Double sided tape and a lot of heat to mold it to the shape of the bumper.

Just wondering how come you didn't upgrade the central screen unit to android auto or apple play unit

@shadtography

11 ай бұрын

I liked how the factory head unit looked. Never found the need for it as well

did u rolled ur fenders? or spacers

@shadtography

Жыл бұрын

Yes, fenders are rolled. Spacers are on stock wheels (20mm) and 5mm on the te37.

did you remove your fkx subframe?

@shadtography

Жыл бұрын

Nope, I still have it!

Where did u get the headlights from. I Can't seem to find a trustworthy source or reseller

@shadtography

9 ай бұрын

Check eBay. Type in UAE headlights 2013 civic. Make sure the front of the lens has a Stanley stamps and the rear plastic piece of the headlight has a Honda stamp to ensure it's authentic.

Hey, 2013 Si coupe owner here. Could you tell me whether you recommend the Vibrant 1042 muffler and the Vibrant ultra quiet resonator or would the muffler be enough to get a little bit more noise out of the exhaust?

@shadtography

Жыл бұрын

Def go with the muffler first. However, the ultra quiet resonator is nice to remove any drone with 60-65mph so you can cruise on the highway at those speeds in peace.

@m.r.i.a8813

Жыл бұрын

@@shadtography Thanks bro! I’ll need that resonator then because I’m always on the highway. 👍🏼

@shadtography

Жыл бұрын

@@m.r.i.a8813 no problem, good luck!

what is the spoiler called?

@shadtography

5 ай бұрын

OEM. It comes with the 2013-2015 civic si sedans from Honda.

where u get the hfp lip for the sedan, i don see them at all

@shadtography

Жыл бұрын

It's not HFP, it's from Ikonmotorsports

@chengxiong9661

Жыл бұрын

@@shadtography thanks bro, I m assuming these are the 12-13 coupe one and u just make em fit?

@shadtography

Жыл бұрын

Oh, my apologies as I thought you were talking about the front lip. Yes, the rears are OEM 12-13 civic SI coupe rear lip modified to fit the civic si sedan. They may be discontinued. Keep an eye out on the marketplace, forums for a set

Thought I made out selling my si during Covid for big money, but now I regret it driving a boring TLX.

@shadtography

Жыл бұрын

🥲

How is the ride quality on the coils?

@shadtography

8 ай бұрын

It was really comfortable, yet responsive.

You have vibrant exhaust? Do you have downpipe?

@shadtography

Жыл бұрын

Yes, rv6 catless downpipe

Where did you get that rear hfp coupe lip? Thankss

@shadtography

Жыл бұрын

From Honda

@miguelnunezojeda3665

Жыл бұрын

​@shadtography did honda match paint it

@shadtography

Жыл бұрын

@@miguelnunezojeda3665 when it was new and easy to obtain, they did paint match to Si colors. I bought it after they were discontinued and happened to get a set in oem silver. So I had to get it repainted.

How many miles on your civic

@shadtography

Жыл бұрын

It had around 106k miles before I sold it

Want to sell thisn

5:12 JESUS, is that what they mean when Vtec kicks in? Thats some mean sounding engine i can tell

@elleris9298

Жыл бұрын

Hahaha, that's exactly what they mean. I love my 9th gen

17x9 or 17x9.5?

@shadtography

7 ай бұрын

17x9

@MarioHernandez-rt4sb

7 ай бұрын

What’s the offset

@shadtography

6 ай бұрын

@@MarioHernandez-rt4sb +34

@angelhernandez-ln8ik

6 ай бұрын

@@shadtographyi would love a set of this but cant find any one who sells them. Uthink if i go 17x8+34 ill get the same fitment as you? Ill go with av6

@shadtography

6 ай бұрын

@@angelhernandez-ln8ik the OG te37 in bronze is discontinued and this was a very limited spec set from ICB. 17x8 will be much weaker than 17x9.

I wish I could but everything is $700