Thank you for watching! Remember to give the video a thumbs up and comment down below if you have additional tips for others!

Doing everything with one hand and holding a camera is impressive.

Thanks, man. My co-worker’s Altima died at work. We THINK it’s the starter, and I’m pleasantly surprised how easy it might be to help her out. My buddy’s CRV needed the intake manifold and a bunch of related stuff removed first. Good work!👍

Thank you! Did it myself and saved $300!

Thank you , I was stranded at home and didn’t know what to do. I would’ve never got the starter off or even knew how to get to the back if it wasn’t for your tips thank you God bless you.

Good camera angle and simplifying the instructions in detail made it easy to comprehend. Thank you.

@ERICSDIYGARAGE

Жыл бұрын

Glad you liked the video thank you!

Thanks a lot this video helped. Also when putting wiring back on make sure to align them correctly with slack to turn starter when putting back on. I had to also lossen the line to give myself more room to turn rachet. All in all worked out fine. Thx again

This is a great video. Actually the first one I’ve seen on the 4 cylinder.

@ERICSDIYGARAGE

Жыл бұрын

Yeah, I haven't seen much for the 4 cylinders. Thanks for watching!

This video was helpful. I just replaced a 2018 Nissan Rogue S 4 cylinder starter. The sizes for the two nuts behind the starter were correct. I used a 5/8 for the 2 bolts. In my extraction, the lower bolt was easier to access while the longer one needed a tad more time. It took me roughly 45 minutes from start to finish using socket wrenches and extensions.

Great video. You’re the man! Going to try to swap the starter on my 2011 Altima. All I’ve ever done was change my battery so wish me luck!

@ERICSDIYGARAGE

Жыл бұрын

Thank you. Hopefully, you got it fixed !

Thanks, man, my started failed on me I needed to get home, replacement on the way

Your the man with the best info thank you much

@ERICSDIYGARAGE

Жыл бұрын

Thank you for watching!

Solid video! Thank you 🙏

Are the 2015 and 2018 altima starters interchangeable?

Great work! thanks for sharing your knowledge.

@ERICSDIYGARAGE

11 ай бұрын

Thank you for watching

If you jump start it and it cranks on it's the battery?

U explain that very well, and a video showing was very good 👍❗,👁️ would give U an A on performance and showing 👍❗😁😀 ♥️💯💪

Hi. Wanted to know does the 13 Altima have a starter in the same area thanks in Advance

Thanks for your help

@ERICSDIYGARAGE

Жыл бұрын

Thank you!

How did you get the starter going with the battery being disconnected ?

Hello, my 2015 Altima is doing something similar, I caught a flat and drove home 😞,upon getting home I couldn't turn the car off,and all lights on the dash was on, push button not, responding. Had to remove fuel pump fuse to cut the car off. Put the fuse back in, now car powers up, but doesn't start,no sound when pushing buttons, also headlights stay on. Blower motor comes on as well. 0 sound.

Mines turns over but it takes about 40 to 60 clicks before it turns on is that starter issue as well?

@ERICSDIYGARAGE

Ай бұрын

Could be your battery

Hi, i have a nissan maxima, its locked, battery dead and the key does not open the door, can i charge the battery from the starter engine?

@ERICSDIYGARAGE

Ай бұрын

No you can't. Your key fob should still habe a key that you can take out and open the door

I replaced my starter 3 x in around 10 years .....just 2 days ago after work it didn't wanna start again but came on after a while haven't had it happen again should I replace again?? My battery is brand new..2004 g35 coupe

@ERICSDIYGARAGE

Жыл бұрын

It will likely not turn on one day, just save up in the meantime

Dam bro I wish live close to me I need a good mechanic like you

@ERICSDIYGARAGE

Жыл бұрын

If only I could clone myself 😮‍💨

@Angel-cp1sr

Жыл бұрын

@@ERICSDIYGARAGE good stuff bro I actually learn a lot stuff from your g35 repair videos

@ERICSDIYGARAGE

Жыл бұрын

Thank you bro! I'll keep them coming

Removed the 2 bolts but it’s still not loose like yours was

@ERICSDIYGARAGE

11 ай бұрын

Might be corrosion holding it on try hitting with a hammer

Is the starter motor working properly now ?

@ERICSDIYGARAGE

Жыл бұрын

Yes

# 1

where are you located i need a good macanic

@ERICSDIYGARAGE

11 ай бұрын

Phoenix Az

Hi Eric, I was wondering if you can give any tips for a g35 2005 headlight issue? I was wondering if you have any tips or ideas of why only one headlight (low) on the drivers side won't work. I had just replaced both low beams left and right. The left low beam headlight won't turn on at night but the high beams work on both sides. Do you have any tips? I appreciate any help!! Thanks!

@ERICSDIYGARAGE

Жыл бұрын

Check your ballast and bulb igniter

@antoinereyes7575

Жыл бұрын

Hey Eric thank you! I ended up checking it and the ground wire was loose. Am I able to wrap the ground wire with electrical tape because it keeps getting loose and making the light go out?

@ERICSDIYGARAGE

Жыл бұрын

@antoinereyes7575 yes that should be fine. A better way would be to add some Soder

Now do a vídeo of how to remove a broken bolt 🥲

@buccaneerbob11

6 ай бұрын

They sell bolt extraction kits