Brilliant work, thanks for the upload!

Thanks for the share Speedy. Really appreciated it .

@TheJocke77

5 жыл бұрын

DIOMTV : You're welcome!

Very nice video, thanks for posting. 👍

Good Job! Will do it exactly that way in the future... thx!

@TheJocke77

6 жыл бұрын

briglnai: Thanks! Nice that you liked the video.

I'd like to know the maintenance schedule for the little pink pit bike in the background! Thanks for posting, feel confident to do it now! You rock!

@TheJocke77

2 ай бұрын

campbecd: The maintenance schedule for the pink bike is once a year or every 310 miles😂 Thanks! I'm glad you liked the video.

Perfect. Thanks mate

What make are your paddock stands and where did you get them please? I'm after getting a pair for my 2008 Speed but not sure what to get. Cheers

@TheJocke77

6 жыл бұрын

Nick D : I found mine in a store that sells accessories for motorcycle and car. Just Google Triple Tree Stand and your city then you will surely find something close to you.

Can we get a link for the stand?

I'm assuming a standard front fork lift paddock stand (that I am currently using without success 2 hours later) will not work? Only a triple clamp yoke stand will?

@TheJocke77

6 жыл бұрын

Jason Foote: Okay, I have not tested a standard front fork lift paddock stand. I only use a triple tree stand to lift up my bike in the front and I'm very pleased with it.

@jasonfoote8297

6 жыл бұрын

I just purchased a triple tree stand and it worked great. The original front fork lift stand worked on my CBR 500, but it did not have independently tuned front suspension. Thanks for the video, great job.

@TheJocke77

6 жыл бұрын

Jason Foote: Thank You!

Can you write down the required torque for the bolts? I'm planing to do this on my Daytona 675 for the first time...

@TheJocke77

6 жыл бұрын

David Šekoranja: Sure, here it is: Them two small screws that are mounted in one fork leg 22Nm. Wheel axle 65Nm. The two screws to each brake calliper 55Nm.

@rookki2

4 жыл бұрын

What about the 5 bolts that hold the brake disc to the rim ?how much NM ? Got my wheels re-painted. So soon will be reassembling the wheels.

Those triple tree stands looks brilliant would you recommend one? I have a triumph daytona 675 and I'm putting it into storage and I've been told this is the best stand to keep the tyre off the ground

@TheJocke77

6 жыл бұрын

mark hill: I would definitely recommend getting one. I use the triple tree stand and the rear stand when I'm putting it into storage over winter to keep both tyre off the ground.

@markhill8590

6 жыл бұрын

Mr. Speed thank you for your reply i wasn't sure about them but they seem the best stand to use, thanks once again

@TheJocke77

6 жыл бұрын

mark hill: You're welcome!

@markhill8590

6 жыл бұрын

Mr. Speed I forgot to ask where do you keep your bike during the winter?

@TheJocke77

6 жыл бұрын

mark hill: I keep it in a car garage.

How big is the wheels screw?

@TheJocke77

3 жыл бұрын

Jeremy Eden: Front wheel axel is Allen key size 17mm and the rear wheel nut is size 46mm.

I just bought the same bike, how is that wheel holder attached to the bike? can you put in a link where to buy one? thanks.

@TheJocke77

2 ай бұрын

31acruz: I mount the wheel lifter underneath steering head. Just google "How to use a triple tree stand?" then you will probably find more about how this works. Here is a link: www.motea.com/en/steering-head-stand-motorcycle-constands-classic-5-pin-steering-head-mounting-stand-red-295123-0

@31acruz

2 ай бұрын

@@TheJocke77 Awesome, thanks dude!

Bra video! Precis fått min Street triple RS och den lär behöva byta sina Pirelli Supercorsa SP ganska ofta. Så det kanske är en bra ide att lära sig...

@TheJocke77

6 жыл бұрын

Marthin Nielsen: Tack så mycket! Har bara testat Street Triple RS en gång och den är GRYM!!! Ja, sådana däck slits snabbt.

What tool and size was that you used to remove the front axle?

@TheJocke77

6 жыл бұрын

justice mcdaniel: I used Allen key size 17mm.

@miguelcintron6595

6 жыл бұрын

thx i was going to ask the same - btw no need to bleed the calipers ?

@Ndeasington

6 жыл бұрын

No. You don't need to bleed them. Just take them off the forks so you can get the wheel out. Tie them up with some string so that you don't put any undue pressure on the brake lines. Remember not to pump the brakes while the wheel is off as you won't be able to get the disks between the brake pads when it comes to putting the wheel back on.

What’s the torque on the front axle?

@TheJocke77

3 жыл бұрын

Tyler Felland: Sorry for the late reply. The tightening torque for the front axle is 65Nm.

What other things have you done or change to the bike

@TheJocke77

6 жыл бұрын

STR Rider: This is what I have mounted or replaced all by myself on my motorcycle so far: Flyscreen, Bellypan, Tail Tidy, Iridium spark plug, Front tire, Rear tire, Rim Stripes, Battery, Exhaust system, Oil and Oil filter and Brake fluid.

Usually I cuss at least once. Is this garage located in a library?

some talking would have been nice... I felt so alone...

@TheJocke77

6 жыл бұрын

Techno Tard: Sorry but my english is terrible so I don´t want to talk in the video.