www.williamsmobileclutch.co.uk 🇬🇧 Contact us for your clutch replacements. Thanks to our KZread customers and everyone showing us support.

@nikolaj550

Жыл бұрын

hello do you have a webiste to the tools you are using

Absolute master Mechanic

I am fascinated by watching her work. you are king Kevin 👏👏👑

@WMCS

Жыл бұрын

Thankyou. 🍻

New Milwaukee ? Still an inspiration to me, and one of my favorite yt channel. Great respect !

That looks like one of the tougher ones you've done. Nice work!

Thank you Kevin for taking the time to make remarkable videos and incredible shots, I share the same pation as you and I can say you are the king of the clutch ah ah, Canada Quebec

Хорошая работа! Молодец!!!!! Ждём новых работ!!!!

Good job man! I wait to see you when you work on Duster 2!

Bu işi çok güzel yapıyorsunuz

Congratulations Kevin, you are a great professional 👍👍👍👍From Milan Italy.

@WMCS

Жыл бұрын

Thankyou very much.

Great work! I really appreciate watching a Renault. Sometimes you take out this kind of boxes without taking the battery out. Sometimes you prefill the CSC but not this time. Just in newer CSCs? In any case, thanks for the video!

WAW!! It's great to go to a maintenance workshop and have your car repaired by someone who knows where every screw and every part is located ❤

@WMCS

11 ай бұрын

Thanks 🙏🏽

Toujours au top 👍👍👍

@WMCS

Жыл бұрын

Merci

Beautiful! 👏👏👏👏👏

I like how he ever so gently taps that bracket with "that hammer" @41:49, knowing how violent he gets with that hammer in the same area on some cars, lol 😂.

@WMCS

Жыл бұрын

😁🍻😆… that’s it mate. Apparently a bit of violence seems to do the trick

and thats a thumbs up from me buddy👍

Гарна робота Кевіне, я також маю рено кенго і сам роблю ремонт завдяки таким відео як ваше. Мої вітання з України!

@WMCS

10 ай бұрын

Greetings 🍻🍻

The Man the Legend 👍🛠️👍

@WMCS

Жыл бұрын

🍻😁

I just Respect you

Got myself a 2014 Renault Kangoo - and after watching this, am just going to pay a mechanic to do this Too complex for a DIY job

Saludos cordiales desde Venezuela...

@WMCS

Жыл бұрын

Greetings.

You are doing a fantastic job. How is the new M18 doing?

Nice and beautiful. 👍

Top man 👍

@WMCS

Жыл бұрын

Thank you Mike 🎄

👏👏👏👏👏👍👍👍👍👌👌👌👌удачи

Brilliant

How you doing Kev hope all's well neglected your channel for a while but I'm back now. Missed my spanner fix 😁👍

@WMCS

Жыл бұрын

Thank you Andy. I’m still going from strength to strength and endurance level still above average … a bit like one of them Fred dibhna steam rollers … Hope all good your end and in best of health. Blessings your way 🍻

SUPER

Kind regards William home clutch service open many but William is the forerunner there are more now but the first was William

Kevin 👍👍👍!!!

Did this have a loud rattle at idle? From the faulty clutch plate cover? Ive got same kangoo.. been having early signs of gear slippage in 3rd. At idle the rattle noise is so loud. I can drive and change gears like normal with the exception of the loud noise at idle. Pressing and depressing the clutch pedal noise still remains the same.. i duno if i shud get clutch cover & disc only or a full set with flywheel.

That looked a pig of a job! Is that a portable heater you have Kevin?

Hello, I just want to ask you what kind of rubber pads do you use on the floor at work? I'm looking for something similar when I work on a car. Thanks man you are doing awesome but hard work!❤👍

@bc-mr1si

Жыл бұрын

you get them at B+Q

Any reason why you used rubber grease?

great job buddy. What liquid do you use to clean?

@WMCS

5 ай бұрын

Brake cleaner

good job you are a professional man does this impact wrench have 1000 Ft lbs??

@WMCS

Жыл бұрын

I know in Nm it’s 2500

@mohamedakrouh4580

Жыл бұрын

@@WMCS it's 1356 nm i think

treated yourself to a new impact wrench

I've heard these 1.5dcis are pretty bulletproof engine 8 valve and only fuel pumps go on m.?

@WMCS

Жыл бұрын

They are indeed. I’ve not heard of any issues with the high pressure pump. I’ve got the same engine in my work van.

@garywinterbottom6073

Жыл бұрын

@@WMCS I heard the delphi pumps can give issues not Bosch or Siemens.

What about that nasty crank seal leak? What if oil gets in the clutch disk

@robpal5588

Жыл бұрын

Good question... Half way fix. I seen it many times on this channel.

@mr.t2585

Жыл бұрын

I admire Kevin's work and skill but I can understand him. No shop near working area, vehicle is on stands and you can't leave the working place and tools to buy few$ crank seal.

@robpal5588

Жыл бұрын

@@mr.t2585 sure. but for next mot it will not pass. Job twice. So? Order always in advance kit. If not needed just return. Simple. Few £ to fit new seal? I dont think castomer ll be upset to pay extra for good job done.

@WMCS

Жыл бұрын

Replacing a crank seal will only mask the problem temporarily. Rubber seal doesn’t leak as rubber doesn’t disintegrate in oil. If ever there is leak coming through the crank end that means there’s movement in the crankshaft. To resolve it you need to 1 take the sump off. 2.remove and replace both big end and main crank bearings. 3. Then proceed to replacing the crank seal. How do I know. Level 3 JLR diesel engine and gearbox specialist… K-A. Williams.

Some bloke , how much woild this cost my friend has same kangoo eco 2 clutch gone would ya travel to newcastle upon tyne

@gedman9527

Жыл бұрын

Got it sorted , great content , thanks for taking time to upload 👍💪

new impact wrench

Have you replaced a clutch in a Porsche 911??

@WMCS

Жыл бұрын

Not yet

Bonjour Kévin pourrai je connaître le produit que utiliser pour nettoyer l’intérieur de la boîte si possible merci

@WMCS

Жыл бұрын

It’s brake cleaner

@MarieCoralie-yn9ik

Жыл бұрын

@@WMCS merci

Io sono del parere che noi meccanici siamo sottopagati..in italia

@WMCS

Ай бұрын

Very very true …

That a new M18 high torque? If so, have you see the issues with the new ones, as highlighted by the Torque Test Channel? kzread.info/dash/bejne/m6mnuNGaYpTKkbQ.html

@WMCS

Жыл бұрын

This new one is the more expensive range very high torque The one you’re referring to I have in my toolbox I bought it earlier this year and it’s a complete failure of the range. First day I got it nearly broke my wrist as it locked and kicked back. Does it every single time so it just sits in my tool box.

@sc5015

Жыл бұрын

@@WMCS Contact Milwaukee. This fiasco with the high torques breaking and/or seizing up has been a huge embarrassment for them, as they are supposed to be a "premium" tool maker at a premium price, but even DeWalts or Ryobi's haven't had had failures like that. If that tool has the 2767-20 model number and H96B in the serial number, Milwaukee will replace it with a H96A which is the original design, and time and work proven to be reliable. That said, I love your videos. People like to think they are hard workers, but you define hard work by being out there in the elements, slinging heavy parts by yourself. You are tactile with your movements, not wasting time or effort.

looks like a CHIMNEY SWEEPER car?! In germany they use exactly the same🤣🤣

@WMCS

Жыл бұрын

Fair enough.