2011-2019 Ford Explorer Cabin Air Filter Replacement
Тәжірибелік нұсқаулар және стиль
Do you know how to replace the cabin air filter in your 2011-2019 Ford Explorer? There is no need to pay a mechanic when you can do it yourself in less10 minutes! Grab a flathead screwdriver, a cabin filter and watch my easy to follow steps to become your own mechanic!
#ItsTheChad #cabinairfilter #fordexplorer
This Cabin Air Filter will also fit:
2010-2019 Ford Flex
2009-2018 Ford Taurus
2013-2018 Police Interceptor Utility
2013-2018 Police Interceptor Sedan
Filters:
amzn.to/3qR2wMU
amzn.to/3AzIwlb
To Follow and See What I'm Up To:
/ itsthechad71
/ itsthechad71
Keyword research tool for KZread (TubeBuddy) - www.tubebuddy.com/ItsTheChad
//My Gear Used:
My Camera -amzn.to/3FMHcML
GoPro - amzn.to/39EJmDF
My Tripod - amzn.to/3gLfeKO
My Microphone - amzn.to/485QAtY
My Lighting - amzn.to/34Y4aDG
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting ItsTheChad!
Пікірлер: 58
This was the best instructions on changing in cabin filter, others didn't explain how to get door off where filter is located.
@ItsTheChad71
11 ай бұрын
I appreciate it! Thanks for watching!
Yup. Not more than 10 minutes. Didn’t take the dash side off (I break stuff too easily). I didn’t even know about cabin air filters, so this one is from factory, 120,000 miles and countless dog and cat rescue transports. I really appreciated the hemostat tip. Honestly putting that last clip on took the longest, so was super thankful having the hemo on it.
@ItsTheChad71
11 күн бұрын
I’m glad it could help! They hide these things in the oddest places!
Out of all of the videos I've watched on how to perform this service, yours is the simplest & best explained!!!👍👍 Thanks!!
@ItsTheChad71
6 ай бұрын
I really appreciate the feedback! I was hoping the step by step would help folks out. I enjoy saving folks money where I can. Thanks for watching!
I’ve watched over 10 videos & your video was the easiest one out of all. Ty
@ItsTheChad71
5 ай бұрын
I appreciate the feedback and I’m glad it could help! Thanks for watching!
Excellent Vid my man!!! Very thorough!!!
@ItsTheChad71
2 жыл бұрын
Thank you! I hope this vid will save folks time and money!
That last part 😂 lol love this video
@ItsTheChad71
Ай бұрын
I’m just an idiot with a camera!! lol
ALL horizontally mounted cabin air filters with the blower motor mounted below the filter will have downward air flow direction. Otherwise the blower motor would have dirt and debris trapped inside of it.
@ItsTheChad71
2 жыл бұрын
Great tip! Thanks for the comment!
Excellent video. There was enough light so I could see what you're doing
@ItsTheChad71
Жыл бұрын
Thank you! I’m hope it could help!
Really helped out thanks
@ItsTheChad71
Жыл бұрын
Good deal! Thanks for sharing and for watching!
So very well done, easy to follow, plenty of light, correct angle to show exactly what you are doing, entertaining as well. Completely agree with the mind of an engineer, they think differently and in this case it applies to automotive design engineers, software engineers, electrical engineers you name it. Thanks for the great job. 😁
@ItsTheChad71
10 ай бұрын
I appreciate the kind words! The owners manuals are almost worthless these days! Thanks for watching!
I too followed your instructions on my 2019 Explorer. After I removed the side panel and the pull wire, then the top two clips, there was no room to get my hand through the limited space. This is because the door only opens till it hits the cross bar below it. I am reluctant to take the cross bar off. Did you remove the bottom cross bar so the door would open wider? What year Explorer did you change the cabin filter in? After looking at some other videos, I think that cross bar is actually an air bag.
@ItsTheChad71
Жыл бұрын
Mine was a 2018 xlt, kind of basic model. My door was able to open quite a bit after the top stops were released out of the dash as the video showed. I’m not sure why some can open and others can’t. If it still feels tight, play it safe and remove the bottom 2 white hinge clips. They should slide towards the center and pop loose from the dash.
Thanks i just did mine!
@ItsTheChad71
10 ай бұрын
Good deal! Did it go smoothly?
@villaltaarnol
10 ай бұрын
Yup...thanks!
@ItsTheChad71
10 ай бұрын
@@villaltaarnol great!
Did you leave the glove box door on while you changed out the filter ? Just let it hang ?
@ItsTheChad71
Жыл бұрын
I let it hang. I had my knee under it but you could also put a board or something under to keep it from popping the hinges loose.
Do yourself a favor and remove the 2 white hinge pins before doing anything else so you don't break the hinges and have to buy a new glovebox.
@ItsTheChad71
3 ай бұрын
I can’t say that isn’t bad advice!
@leenapper255
3 ай бұрын
@@ItsTheChad71I learned the hard way. I watched another video that left this step out. Luckily I was able to repair mine with super glue and duct tape lol.
Hardest part is removing the filter door. Wish you would have filmed the actual Removal. Thx anyhow
@ItsTheChad71
Жыл бұрын
That would have been. I have been using a small flat head pocket screw driver.
Hi! I tried doing this but can’t get the cover to the filter to budge. Any advice?
@ItsTheChad71
9 ай бұрын
I have used a small pocket flat head screwdriver as well. It’s small enough it doesn’t break the plastic.
I have a 2014 Explorer w/v6 engine. I followed the video but when I the open the box past the stops and let it hang there's not enough room to get to the filter housing
@ItsTheChad71
2 жыл бұрын
If yours won’t give you the space, slide the white hinges in at the bottom of the door and it will come off.
KZread family, I’d advise you to slide the bottom white clips if possible. If you choose to go his way be prepared to squeeze through a narrow opening which can potentially break the bottom clip if you attempt to squeeze through. I will have to assume that Chad also disassembled it prior to videoing it.
@ItsTheChad71
Жыл бұрын
My hands fit in the opening and I have never broke anything. As long as I release the box all the way down there was no reason for me to pull the clips. I have changed that filter several times over the years, so thats how I learned to do it this way. Reinstalling the white clips can be a pain since I can’t see them very well. Thanks for your input!
@KHunterK3
Жыл бұрын
I followed your video and broke the hinge when I pulled down slightly on the glove box trying to get to the filter. Found the removable pins after the fact...
@charliemichelle4561
9 ай бұрын
I can concur, it broke my right clip that holds onto the white piece. Popped it back on tho so it’ll do! Unfortunately for those of us with foot air bags.. this is our only option (chads video) as the airbag covers the white pegs that you’re recommending be removed.
@charliemichelle4561
9 ай бұрын
@@KHunterK3if you have a leg/foot airbag it doesn’t matter you can’t remove them anyways! Count ur losses and just be glad ur air is cleaner now.
He is why I love my white cousins!!! All humans are awesome!
@ItsTheChad71
6 ай бұрын
Thanks for the support! Stay safe!
You are the fucking man ❤
@ItsTheChad71
11 ай бұрын
Thanks! Love the profile!
Hi sorry but you didn’t show next step to take off the 2 white pin under dash in order to take off 😮have a nice day
@ItsTheChad71
Жыл бұрын
I have small enough hands that I don't pull the white plastic pins out. They are too hard for me to get them back in without breaking them.
Thank goodness you didn’t smash your beautiful face by accidentally setting off the airbag 😍
My air filter directional arrow was originally pointed upward. Am I the only one?
@ItsTheChad71
Жыл бұрын
If I remember correctly, my original filter was installed upside down too. I have heard this from others as well.
@nnan0001
Жыл бұрын
Mine was installed by the factory upside down. Mine took 10 minutes. I let the glove box drop and there was plenty of room.
10 mins., L. M . A. O. !!! No mention of removing the White clips that whole glove box . They are plastic and a bitch too remove . Now the filter cover, again plastic . Total time more like2 Hours and be damn careful not to break plastic . Want more challenge,, Find the fuse panel and try and remove a simple fuse .
@ItsTheChad71
2 жыл бұрын
Good call! I don’t know why other vids say to remove hinge clips. Extra unnecessary step! I just open the box past the stops and let it hang. I still had enough room to get to the filter housing. I’ve seen too many folks break the clips or not be able to get them back in. You can save so much time leaving them in. You are so right with all the plastics! Sometimes I think parts are built to break…Thanks for watching!
@henrymiecz8566
Жыл бұрын
Ha totally agree. Ford you are a joke!
I agree about Ford engineers. Some of the dumbest people on the planet. Trying having a 1st generation Ecoboost engine? Let's put a standard 3.5 L chain on a twin turbo engine? What could possibly go wrong? But thanks for the video.
@ItsTheChad71
2 жыл бұрын
Right? Sometimes I think a shade tree mechanic should be on the payroll to just watch and say “that’s going to be a problem later!”