2011-2016 Toyota Sienna Transmission Fluid and Filter Change (DIY)
Автокөліктер мен көлік құралдары
This 2012 Toyota Sienna is getting the transmission fluid and filter changed.
🛒PARTS LIST:
▪️ Filter kit 18 bolt pan: amzn.to/49oX46H
▪️ Filter kit 19 bolt pan: amzn.to/43KEt3Q
🛒TOOLS NEEDED:
▪️ Allen socket set: amzn.to/3ksxOWY
▪️ Electric ratchet: amzn.to/3Sw4W12
▪️ Fluid pump: amzn.to/42RSs7G
▪️ Socket and wrench set: amzn.to/4b6K8ob
▪️ Torque wrench 1/4: amzn.to/493Xr70
▪️ Torque wrench 1/2: amzn.to/3AgaOB2
▪️ 24mm socket: amzn.to/3TJWjzh
😎If this video has been helpful consider supporting us with a cup of coffee! 🙂
www.buymeacoffee.com/ValleyMo...
➡️I am part of the Amazon affiliate program and get a small commission when purchases are made through the links provided.
🔺DISCLAIMER
The information provided by Valley Mobile Automotive (“we,” “us” or “our”) on this video is for general informational purposes and entertainment only and does not replace professional advice.
All information is provided in good faith; however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on the video.
By working on your own vehicle, you take responsibility for the outcome.
Under no circumstance shall we have any liability to you for any loss or damage of any kind incurred as a result of the use or reliance on any information provided on this channel. Your reliance on any information on the videos on this channel is solely at your own risk.
Пікірлер: 33
THIS is the legit way to do this
This video was done very well. Of the many DIY car videos I have watched, this is one of the best yet. Excellent work, and thank you for taking the time to create it.
@ValleyMobileAutomotive
Ай бұрын
You're welcome! Glad this was helpful 🙂
The best comprehensive video Bro, efficient accurate right to the point with all the small details that you need to know when you doing that kind of job well done
@ValleyMobileAutomotive
4 күн бұрын
@@MosheAbudraham Thanks! Glad this was helpful 🙂
Simple, straight to the point, informstive with torque specs and great explanations. Abolsutely perfect!
Perfectly understandable with outstanding video and audio quality !
@ValleyMobileAutomotive
Ай бұрын
Thanks! Glad this is helpful 👍
@ValleyMobileAutomotive
Ай бұрын
Thanks! Glad this is helpful 👍
So much value in these videos!
just perfect
Thank you for providing such thorough information. I found this procedure surprisingly hard to research but your explanation was excellent!
@ValleyMobileAutomotive
23 күн бұрын
Glad this was helpful 🙂
Thank you for posting.👏🏻👏🏻👏🏻🙏🙏🙏
Thank you for all details and tips.
@ValleyMobileAutomotive
Ай бұрын
You're welcome! 🙂
Thank you
Very thorough! Thank you for posting torque specs throughout the video. Do you happen to know the fill plug and drain plug gasket part numbers?
4 quarts is usually enough. Especially if you give her an italian tuneup afterwards. Helps liberate any debris and other stuff. I discovered with my old fluid it was really acrid and I found 2 bugs in the pan afterwards. Bugs probably clogging the valve body.
How did you make the DIY jumper wires?
Hello VMA - We'd like to hire you for F150 cam related repairs but not sure of your location. We are in So Cal Area. Please advise
Hey, where are you located ??
Since I saw the video You most probably won’t change it by myself Also I don’t trust the mechanics to do it . By the way in which state is located your shop ?
What is the brand name of the “screw gun “ that you are using ?
@ValleyMobileAutomotive
18 күн бұрын
It's the S-Long electric ratchet. Here's an Amazon link... amzn.to/3VjwUgK
Does the pan have to be removed to change the Trans fluid? Can’t you just drain and fill?
@ValleyMobileAutomotive
2 ай бұрын
No, you can just drain and fill. I would recommend the filter if it's never been changed before.
@Betamax84
2 ай бұрын
@@ValleyMobileAutomotive thanks
@exotics4life618
2 ай бұрын
@@ValleyMobileAutomotive where are you located? Which state? Thanks
Good job sir That fluid is sooo black😂
Use a open end 10 mm wrench. You dont need to do all that nonsense to get the pan off
@ValleyMobileAutomotive
2 ай бұрын
Try that first. If it doesn't work then here's an alternate method 👍. Guarantee though by removing one nut and jacking up the transmission an inch or two your life will be happier when removing those two pan bolts 🙂
@kevins5268
2 ай бұрын
@ValleyMobileAutomotive I dropped that pan in 15 minutes without doing that. Your method works ya but you don't need to do that