2011-2016 Front Bumper Swap to 1999-2007 Ford F350 Super Duty
2011-2016 Front Bumper Swap to 1999-2007 Ford F350 Super Duty
Metal Bumper
ebay.us/m8rWV8
Trim
amzn.to/44Ou3Qm
ebay.us/EmXpMH
License Plate Holder
ebay.us/rI7Y2Z
Bracket Kit
ebay.us/DjL6C6
ebay.us/lP2JbP
Valance
ebay.us/OzotiT
Valance Clips
ebay.us/FcZcY8
Bolts around the Tow Hook Square Plates
ebay.us/T78m5g
If you would like to support the channel:
www.amazon.com/hz/wishlist/ls...
Пікірлер: 31
No I’m not going to hate on this because I really like this but there is one thing I would change I would cut the brackets and the grill and have it sit back a little further
Thanks for the video 🙏🏻
I think it looks good might try it on my 2003!!
Looks great 👍
Happy to see another nj guy
Looking good.👍🏼
Its crooked too
I just bought a that bumper and plan on doing the same... I also have an 02 with an 05-07 front clip.... I’m going to attempt some fabrication work to get it to sit back a little more... I think the biggest concern of mine is the gaps at the bottom corners of the grill... but looks sweet man good shit
That piece that you were wondering what it is it's for the crash bar but it appears you dont have one on your truck idk why because you should to hold the frame together instead of the bumper holding your frame together
At the 2.0 min mark you show the holes of a missing crossmember. Its removed and saved when installing a plow. You mentioned that point. In the Fisher / Western plow mount instructions and on a label on the crossmember, its written that this crossmember must be saved and transferred with the vehicle for replacement if the plow mount is removed. It is apparently a critical safety component and needs to be reinstalled if plow mount is removed. Something to consider looking into. I am not a safety Karen and often engage the safety squint while welding :) The amount of labels and warnings make me feel this frame crossmember is very important for the front end. Great video. Thank you
@MoneyisanIllusion
Жыл бұрын
It turns out later I looked at a stock truck crossmember and my leaf springs for the lift would hit where the bar goes.
It can be done but that isn't it my friend, you need to make yourself brackets that drop it down and suck in that bumper in so it goes under the headlights at least 3/4? under the headlights. I see some people also cut the bottom filler on the old bumper and blackout the gaps then it looks original. To be honest the original bumper looks better than the new ones when you do the grill overlay color match the trim and install a light bar in the center fog light slot.
Mcnasty customs makes the brackets you need for 40.00 bucks
Wow even with the gaps this looks just Awesome! Thanks for such a great video on this upgrade. Best Wishes & Blessings. Keith Noneya
Some people just desperate to put the newer body style parts on these older trucks even tho it never matches 😂 same as the 2nd gen cummins guys adding 4th gen bumpers
@swashington942
Жыл бұрын
With a little more work it'll probably look nice and tight. Not every one has $75,000 to purchase a new truck.
Do u have f550 front wheels on? Sweet alcoas
@MoneyisanIllusion
3 жыл бұрын
They are just 22.5 Alcoa’s with wheel adapters
Bro its really crooked
I Hurd those me metal things u mention u didn’t know what it was I seen sumwhere that it was not to be able to Climb on cars but not sure
What year was your truck
@MoneyisanIllusion
4 жыл бұрын
2002
Dude what’s the link for that bumper and what all did you piece I wish you had a list I need this 🤔🤔🤔
@MoneyisanIllusion
4 жыл бұрын
I would verify the prices by searching the part numbers again, but here is the links for the listings I bought Metal Bumper - looks like the chrome piece price went way up. I paid $250 for the chrome portion www.ebay.com/itm/NEW-Chrome-Steel-Face-Bar-for-2011-2016-F250-F350-F450-Super-Duty-Without-Flares/282815812671?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 Trim www.ebay.com/itm/FRONT-BUMPER-UPPER-PAD-OUTER-MOLDING-CLIP-FOR-FORD-F250-F350-F450-F550-2011-2016/123543670809?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 Fog lights www.ebay.com/itm/Fit-2011-2016-Ford-F250-350-450-550-Superduty-Bumper-Smoked-Fog-Lights-Switch/161820316538?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 License Plate Holder www.ebay.com/itm/2011-16-Fits-Ford-SuperDuty-F250-Front-License-Plate-Tag-Bracket-Holder-w-Screws/273553437529?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 Bracket Kit www.ebay.com/itm/For-2011-2016-SUPER-DUTY-F250-F350-FRONT-BUMPER-MOUNTING-PLATE-SIDE-BRACKET-6PC/171708648829?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 Valance www.ebay.com/itm/Front-Valance-For-2011-2016-Ford-F-250-Super-Duty-F-350-Super-Duty-Textured/231546758165?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 Valance Clips www.ebay.com/itm/Retainer-Bolt-Nuts-For-FORD-F250-F350-2011-2016-Front-Lower-Valance/202507186324?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 4 bolts for fog light brackets www.ebay.com/itm/OEM-NEW-Genuine-2011-2016-Ford-F250-350-SD-Front-Bumper-Bracket-Bolt-W705201S900/332925762621?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 These go to the bolts above www.ebay.com/itm/For-FORD-SUPER-DUTY-2011-2016-FRONT-BUMPER-BRACKET-U-NUT-QTY-4/202554532714?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 Bolts around the Tow Hook Square Plates www.ebay.com/itm/FRONT-BUMPER-PLATE-BRACKET-BOLT-U-NUT-SET-For-FORD-SUPER-DUTY-2011-2016/173719026209?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
@frankyeager2298
4 жыл бұрын
@@MoneyisanIllusion thanks for info you'd figure the guy asking would of at least said thanks or a like.. Smh
@A1FBG_Mexico
6 ай бұрын
Thanks
That looks horrible.
looks like crap the sides are to short doesn't line up with the bottom of fender flare like oem cheap china made crappy bumper
Does not look.right at all
Looks Horrible