Parts linked in the description!

@am2ndbest

Жыл бұрын

Hello I hve the same car but aftermarket kit doesn't hve the clock setup on kit wat the part number for the kit

@am2ndbest

Жыл бұрын

No where to screw clock on kit

I know it's a bit old but this video helped me just earlier today for a 2013. Thank you!

I'll be doing a 2016 install and this video definitely put me on the right track. Thanks a bunch. The installation and instructions are very clear and I appreciate that. Thanks!

@johnnyjj2712

8 жыл бұрын

I got Kenwood DX 793 installed on my 2016 elantra with Rockford Fosgate R 1200 for one Alpine Swr-12 D2 and Rockford Fosgate P 400x4 for Hertz 6.5 front and back doors. PS: custom made on USB and AUX because factory OEM will not be working.

@chandlersmith4239

3 жыл бұрын

Except that little yellow plug by the antenna plug he didn't say what he did with that??

Instead of an old fashioned Pioneer look for a double din touch screen unit with carplay and android audio built-in. I just put one in my Toyota and it looks great. Spent less than $200!

Hi. When you removed the factory radio, did you see the DRL resistor/module? Thanks.

Thanks, good to have the insight on from removal... no broken trim!

I put this exact radio in a 2013 hyundai elantra but the radio signal is terrible. Any idea ? What's the other wire conected with the antenna wire for

Could you make a wiring harness video to which colors go to what so I can make sure I have my wiring correct? Please!

I have a 2018 Hyundai elantra that I am going to do a remote start in a top of the line 2way color remote what about the warranty on the car with the aftermarket radio

Question about the new brackets and the DIN opening in this car: I noticed that the new brackets are plastic. Does the the new system sit on a metal fixture of some sort? This is to have the proper chassis ground and to better secure the new system in place

Does the dimmer wire work properly with the Metra wiring kit?

Is there an adapter you can buy to avoid messing with the wiring?

Just recently purchased the truck with the same radio. I have power to the unit but no sound. Fuses are good but the wiring is a mess. When I turn on the subwoofers I get sound through there but not through the stock speakers. All the speakers in a vehicle are stock.

hi i am trying to remove this model pioneer unit,,can you tell me how it is removed from its cage thanks

How much does a system like that cost with full installation. My 2103 stereo works but the Bluetooth no longer does, I would like to replace the whole thing and get one like this but with navigational and GPS?

Does this work with a 2014 Hyundai Elantra?

Where did u buy the frame to fit the deck around

How did you remove the clock from the frame? Is it some other model. Mine looks like fixed to the frame (Elantra 2012)

What about the spot for CD???did you close it up?

woow that pioneer is gorgeous. Found a 2008 hyundai elantra gls, 92,000 miles for just $4,000 Looking to add some after-market things to it. Headlights, spoiler, stereo system

What is the pocket used for?

Hey I am trying to find a factory amp remote wire turn on

Can I have your old radio I need a stock new one for my Elantra

hi , can u tell me what is the price of these stocks

Can it work in a 2011 model?

Meaning the previous radio doesn't have bluetooth ??

Small square radio looks out of place with all that curved plastic. The new radio trim piece also looks cheap. Not a fan of this, but thanks for sharing good general info on the radio removal.

@pablonavarro5147

5 жыл бұрын

Not make sense to replace the OEM radio same features than the one he install:)

@4seeableTV

5 жыл бұрын

@@pablonavarro5147 Exactly. If the new radio had navigation, then it would make sense.

@tristanmaldonado4895

4 жыл бұрын

Hey buddies! There is something called a subwoofer. Most factory radios aren't compatible with a subwoofer and don't have subwoofer controls.

@Spliteyemoto

4 жыл бұрын

@@tristanmaldonado4895 You can do a subwoofer with a stock radio. There is conversion equipement that makes that possible. I've done it in several cars.

@shwndh

4 жыл бұрын

I’d gladly install that kit to have Android Auto or Apple Car Play head unit. It’s a cheap used car anyway at this point.

I want to put myself in my car, what is that thing called to put radio in my car?

This looks great. I just bought a JVC for my 13 Elantra, but I can't figure out this wire harness situation.Wish I could find a video explaining it.

@ProvoBeastAudio

4 жыл бұрын

kzread.info/dash/bejne/oqCVwZKPoKu6ptY.html

yeah mine doesn't have the steering wheel control volume so i got the metra 70-7304 also the microbypass video i got em connected with the parking brake except one of the metra that has only 6 wires i have 2ground n a green a green left overs i dont know what to do with those 3?

@ProvoBeastAudio

8 жыл бұрын

Well if they are solid black wires on the metra harness, just ground them. I'm not sure again what colors are left over, can you clarify?

Thank you for your helpful installation video where to place power cable attached on top of fuse holder box.

@ProvoBeastAudio

8 жыл бұрын

I don't understand what you are asking. Sorry

@johnnyjj2712

8 жыл бұрын

+Provo Beast Audio Installation: I was watching your installation video on 2013 Hyundai Elantra. I saw you placed the power cable on top of main fuse box. that was very helpful tip.

@ProvoBeastAudio

8 жыл бұрын

+Chuck Williams thanks!

@ProvoBeastAudio

8 жыл бұрын

+Chuck Williams thanks!

am installing pioneer avh x2800bs i have them all connected just one of the metra wire harness has two extra wires a green n ground do i need to use them or no?

@ProvoBeastAudio

8 жыл бұрын

See my response to your same question above.

Do you happen to know if this radio can fit a Dodge Dart. The se one without the screen?

@ProvoBeastAudio

8 жыл бұрын

+Young Tortilla Check with crutchfield.com for correct fitment. They have a fit guide that would allow you to see if it would fit.

Nice jod👍🏼

what was that yellow plug fro the factory radio and does the factory aux in in front of the shifter thank

@ProvoBeastAudio

7 жыл бұрын

Factory aux no longer works because the aux input is now on the front of the radio. Not sure what the yellow harness plug did.

I have asked a couple of people here on KZread this question. If you install these after market radios does the factory Sirius XM Radio work thru the new unit?

@ProvoBeastAudio

7 жыл бұрын

All depends on the radio you choose as your replacement as well as the wiring harness adapter you choose as well. So the answer is yes and no. On this setup in this video, there was no XM radio to begin with, so it was not retained. If your factory radio has XM radio you wish to retain, you will need to choose a radio that is XM ready. Next, choose a wiring harness via crutchfield.com that will retain that factory XM functionality. With the right harness and the right radio, yes, it is totally possible.

Did you pull the a-pillar trim off at all to help make it easier to feed the mic cable? If you did, would have been nice to see. If not, still good to cover. Because if it's like the 2015 Elantra. The a-pillar has a device that permanently locks the trim in the deployed position so the airbag right there doesn't cause trim to become a missle. That part can be removed and replaced with a new one on the a-pillar.

@ProvoBeastAudio

7 жыл бұрын

We didn't remove the pillar cover, we just pulled back the door seal and ran the wire down without the need to pull anything else apart.

So what about if I already have a Bluetooth microphone installed in my Elantra? Do I still have to rewire some sort of new one? I have an Elantra 2013

@ProvoBeastAudio

4 жыл бұрын

Usually the factory mic is on a separate circuit which becomes nearly impossible to retain, in most times, you will just need to run a new one included with the radio.

Will the steering wheel stereo controls still work after you have fitted new head unit?

@ProvoBeastAudio

6 жыл бұрын

No, you will need a steering wheel control module to retain those features, and a stereo that is steering wheel control compatible. We usually use the ASWC-1 module. This vehicle in the video was not equipped with controls, hence why we didn't retain them.

Now could you fit a big touch screen into the 2013 hundai Electra because I have the limited one I want a touch screen raido also new speakers

@ProvoBeastAudio

7 жыл бұрын

Yep, a touch screen would fit fine which is the same size as the radio we installed.

Hello what about the steering wheel control .. have you bought it ??

@ProvoBeastAudio

7 жыл бұрын

This model wasn't equipped with steering wheel controls.

Where did you hook the blue/pink vss wire too from the metra 70-7304 wiring harness

@ProvoBeastAudio

7 жыл бұрын

Just capped it off, the radio chosen wasn't compatible with the VSS wire.

@sequoyahpritchett7210

7 жыл бұрын

OK thanks

Does doing this allow you to use the factory usb plug with the radio?

@ProvoBeastAudio

2 жыл бұрын

Nope, and in most circumstances, the factory USB and AUX cannot be retained in most Hyundai / Kia vehicles. This radio had the AUX and USB on the front.

I'm assuming that the factory USB/Aux ports (in the little pocket behind the gear shift) will not work anymore after installing the new stereo, or do they still?

@ProvoBeastAudio

7 жыл бұрын

The new radio had the USB and Aux inputs on the front of the radio itself. We did not attempt to retain those factory inputs.

@jneil14521

6 жыл бұрын

Did you ever try I’m looking for the same answer?

Does your usb outlet from your car still work on the radio ?

@ProvoBeastAudio

6 жыл бұрын

No, the usb for the radio is on the front of the new head unit. The factory one becomes obsolete.

Nice definitely helpful information so I'm going to takle this what do I do with the green cable since I'm using a pioneer avh 5700 double din?

@ProvoBeastAudio

8 жыл бұрын

+Josue Valadez The green cable is the pioneer parking brake wire which needs to be connected to the parking brake / emergency brake wire which will allow DVD / Video playback. However, it is most common to bypass it. I have a video on my channel that walks you through that process: kzread.info/dash/bejne/m4tkkrBmZqS9hso.html

@jman4573

8 жыл бұрын

+Provo Beast dude I been putting this off for months but thanks your the man!!! So other than the green cable everything else should be just like your pioneer correct?

@ProvoBeastAudio

8 жыл бұрын

yessir! Good luck with the install.

@ProvoBeastAudio

8 жыл бұрын

+Josue Valadez Check out the channel, have a few videos using Pioneer's AVH double din models and you can see how i've installed them.

@jman4573

8 жыл бұрын

+Provo Beast your a true BEAST Provo I'm subscribed thanks for the help saved me 200$ from takin to a shop!!! God bless!!

Do all the steering wheel controls (volume, next, ffwd, reverse) work?

@ProvoBeastAudio

8 жыл бұрын

This model Elantra did not have steering wheel volume controls. In the event your model does, typically i would recommend the Metra Axxess ASWC-1 for retaining those features for an aftermarket radio. Just be sure your radio is compatible / steering wheel controls ready before you purchase the adapter.

@adrianrodriguez8314

4 жыл бұрын

Did the trip/cruise controls work for the car?

معدل والله

Does the new panel fits any screen?

@ProvoBeastAudio

8 жыл бұрын

The dash kit will fit any standard size double din (4" tall) regardless of the screen size.

Now this the aux cord on the wire harness or was it plugged into the back of the radio?

@jneil14521

6 жыл бұрын

Was*

@ProvoBeastAudio

6 жыл бұрын

The aux input is on the front of the radio.

can u use the elantras fsctoryl amp on aftermarket radios? and do u lose steering control buttons right?

@ProvoBeastAudio

7 жыл бұрын

Yes, you can retain the factory amplifier when you install an aftermarket radio. You will need a different wiring harness to retain the amp. Secondly, you do not have to lose the steering wheel controls either, you can use the Metra ASWC-1 harness adapter and keep those controls even with a new radio.

@ProvoBeastAudio

7 жыл бұрын

Typically, you will hear a sound quality change; typical new radios put out a bit more power than the factory radios which may appear that the speakers get louder. More power equals more volume, clarity, and overall sound quality.

@litdoe7021

7 жыл бұрын

Provo Beast Audio Installation can you send me the link of the harness needed? Also how to retain the factory usb port for charging only purposes since the radio im puting already has a usb port

@ProvoBeastAudio

7 жыл бұрын

The factory USB / AUX port was not retained in this video since the inputs were already on the front of the aftermarket radio. The customer just wanted to use the ones on the new radio only. Depending on the year of your vehicle and trim level, check with crutchfield.com to ensure you get the proper harness to retain the factory amp. They have a part checker which will be super helpful.

I was curious. I searched on amazon the wire harness and it had me insert what kind of car I had and it told me the wiring harness doesn’t fit my car. It’s a 2013 Elantra.

@ProvoBeastAudio

4 жыл бұрын

Don't trust amazon fit guide. Each harness manufacture has a fit guide on their website which you can use to validate which harness adapter is needed for your specific model and trim.

@cyruscarter8415

4 жыл бұрын

@@ProvoBeastAudio thank you

can a touch screen system be installed on it? So that we can get navigation via car play?

@shwndh

4 жыл бұрын

ojasvi chaudhary Go to Crutchfield.com and look up your car. The double din dash kits will work with most any double din radio. You can install whatever radio you want. Pick the radio you want and there will be a link to the dash kit and wiring you need for full install. It’s a nicely laid out website.

@ojasvi828

4 жыл бұрын

All set got it installed . Thanks

I have a 2012 Elantra and I've been looking into replacing the factory radio in order for future upgrades like a conservative sub woofer and speaker install. However that head unit you installed does not fit the car at all. With curved plastic the square stereo is out of place same with the cheap new trim piece. I have to say I like the aesthetic of the stock head unit. Thats my dilemma.

@jesseboyd8849

5 жыл бұрын

On Amazon, I found some stereo kits that will mount it the way you want since I am wanting to do the same thing. The one he installed I found at 15 bucks and the ones we like are at 25 to 45 bucks. Also more buttons on the trim kit the higher the price. The ones that come pre-selected matches are over the value by 50 bucks at least and way better to buy separately.

were you able to install steering wheel controls? axxess doesn't have this car on their website

@ProvoBeastAudio

7 жыл бұрын

This elantra wasn't equipped with steering wheel controls, but the aswc-1 works great on these models.

@MatthewLwin

7 жыл бұрын

Provo Beast Audio Installation you connected the green/orange wire to pin 4 right? My radio detects me pressing the volume button during auto detect but after the 6 red lights it goes to red/green sequence and noting works. Any tips?

@ProvoBeastAudio

7 жыл бұрын

Make sure Pin 18 on the elantra harness is grounded. Make sure the green wire in the elantra harness is connected to the green / orange wire in the aswc-1.

@MatthewLwin

7 жыл бұрын

Provo Beast Audio Installation I did that but after spending a few hours making sure it was the right connection and wiring diagrams i found out the problem might've been because it was a coupe and axxess website said it hasn't been tested on coupe yet

@MatthewLwin

7 жыл бұрын

Provo Beast Audio Installation thanks for your help though

saludos muy interesante el video...yo tengo un elantra manual del 2012 y quiero hacer el cambio de radio de mi auto favor de ayudarme...gracias

@ProvoBeastAudio

7 жыл бұрын

Solo sigue el video y estarás bien. Compruebe la descripción de una lista de piezas usadas en esta instalación

@luismiguelhenriquezgranado2205

5 жыл бұрын

Cómo busco el dashkits para una pantalla de 7" por eBay para el mismo carro

What did you do with the original usb and aux plug ins?

@ProvoBeastAudio

6 жыл бұрын

They became obsolete as they new AUX and USB were located directly on the front of the radio.

@davidmesecherjr.7259

6 жыл бұрын

Provo Beast Audio Installation I know it's now obsolete just curious if there was somthing i could do with it

@ProvoBeastAudio

6 жыл бұрын

No not really, unless you install an aftermarket touch screen radio which houses the usb and AUX on the rear of the unit, then you could use the Axxess AX-HYKIA-USB adapter.

i got a kia but it ises same harness. . now do i use the wores from the harness and correctly match them up to the alpines harness? im confused cuz the stock harness colors for speakers are diffirent. for instance the stock left front + is white and - is brown but on the metra wiring kit the front left + is white and - white/black

@ProvoBeastAudio

7 жыл бұрын

The factory wire colors and the metra wiring harness colors will never match up, which is why you have a wiring harness, which easily allows you to match the metra harness colors up to the alpine's wire colors. Don't worry about the factory wire colors.

@el-hp1lj

7 жыл бұрын

ok cool thanks

It looks ugly,almost buy one of these. Thanls 4 the vid

Do you need to buy the dash kit in order for install?

@ProvoBeastAudio

8 жыл бұрын

Absolutely. The factory radio is in no way the same shape as a replacement radio, so there is no way to install one without a kit. Check the description for the same kit used in this install.

@chieflosa2600

8 жыл бұрын

Alright! Thank you!

Hey Provo, how do i figure out which wiring harness goes with what head unit? Thanks!

@ProvoBeastAudio

3 жыл бұрын

Wiring harnesses come with the head unit when purchased new, but if you don't have one, just search ebay the radio model number and wiring harness.

@BigSlimThic

3 жыл бұрын

@@ProvoBeastAudio Well how does the Head Unit manufacturer know what type of Car you will be installing it in?

@ProvoBeastAudio

3 жыл бұрын

@@BigSlimThic They don't which is why you purchase the dash kit and wiring harness adapter separately.

@BigSlimThic

3 жыл бұрын

@@ProvoBeastAudio I have a 2013 Hyundai Elantra GLS, i received my double din dash kit today. Went through the passengers side grommet with my 4 ga wire. Much easier to access on the passengers side and way easier to work with! So far i wired up my fuse and i just have the spool sitting on my passenger side floor. Im waiting on a PIONEER FH-S520BT unit before i begin to wire up my cap/amp/speakers. This is my first sound system install. Your video has helped a lot. I appreciate you bro. Thanks you.

@BigSlimThic

3 жыл бұрын

@@ProvoBeastAudio So my Head Unit didnt have a pinout wiring diagram? How do i wire the unit's harness, to the to my Metra 70-7304?

This is a GREAT video! I liked your video so much I looked up a Pioneer FH-X720BT to install in my 2013 Hyundai Elantra... but it says it will not fit on Crutchfield.com! Now... is that because you made this work yourself and that Crutchfield might not have a kit for me, or is it because maybe my GLS Elantra didn't have something I need for this?

@ProvoBeastAudio

7 жыл бұрын

There was no modification, the kit worked great! Now if you have the factory amplifier, your wiring harness would be a little different, which you would need the Axxess HYBL-04 Wiring Interface. If you don't have the factory amp, all the parts in the video description should work great.

@CJManning86

7 жыл бұрын

Provo Beast Audio Installation I saw there is a four speaker kit that comes with this stereo head unit too... do you know if those are compatible? I figure if they are I could upgrade those as well. Thanks for the reply, I subscribed because these are good videos and you're replies are good too

@ProvoBeastAudio

7 жыл бұрын

All 4 speaker sizes in the elantra are 6 1/2" or 6 3/4". as long as those are the same size, they will work.

does the stock USB port still work with new stereo?? also what about the steering wheel controls?

@johnnyjj2712

7 жыл бұрын

I got Kenwood DX 793 installed on my 2016 elantra with Rockford Fosgate R 1200 for one Alpine Swr-12 D2 and Rockford Fosgate P 400x4 for Hertz 6.5 front and back doors. PS: custom made on USB and AUX because factory OEM will not be working.

Is the stereo set up a single din or double din?

@ProvoBeastAudio

6 жыл бұрын

We used a double din so yes. And it would fit a single din too

@krieger67333

6 жыл бұрын

Provo Beast Audio Installation is there a size maximum?

@ProvoBeastAudio

6 жыл бұрын

Standard Double Din size, generally 4" tall.

Does the stock usb port still function?

@ProvoBeastAudio

6 жыл бұрын

It wasn't retained on this radio since the USB port was on the front of the new radio. You can purchase the PAC kit which will allow you to do so.

@Erlov71

6 жыл бұрын

Provo Beast Audio Installation do your chimes and blinker sounds still work?

@ProvoBeastAudio

6 жыл бұрын

yes

About how much did you spent in all the stuff?

@ProvoBeastAudio

5 жыл бұрын

Prices Vary, but the description includes all part numbers and amazon is generally the cheapest.

@andrewlee6636

5 жыл бұрын

thanks

not bad for $80 unit .

Ok so what if I have a 2008 I really need help !!!

Just keep the factory radio. Replace the speakers in the doors instead. There's nothing the new radio can do that the factory radio can't. Back in the 80's and 90's, factory radios were crap. No aux in, no Bluetooth, no satellite radio, sometimes not even a cd player. One of the first things I would do after getting a new car was swap out the factory radio for something with more features. Today's factory radios have so many model specific features that it's hard to really "upgrade" one without sacrificing something . In the case of the Elantra, you have the USB/iPod reader and aux input jack down in the compartment under the climate controls. Do those still work on the Pioneer? It looks like I now have to use the aux in jack on the stereo's face plate.

It's not as easy to take off the vent covers like it shows on this video.

@ProvoBeastAudio

7 жыл бұрын

Pretty easy for me

2011 elentra mode model teypçi arabanın içine sıçtı gene olmadı teyp 2015 modelmiş... eski teybı geri taktık..

Don’t get why idiots put aftermarket radios that have all the same feature as the OEM radio into their car and it just makes it look stupid like I can understand if you were putting in a navigation touchscreen but why the fuck would you want a bass radio

Ugly setup!

am installing pioneer avh x2800bs i have them all connected just one of the metra wire harness has two extra wires a green n ground do i need to use them or no?

@ProvoBeastAudio

8 жыл бұрын

If you have factory steering wheel volume controls, the Meta Wiring harness provides those wires for ease of connection. You would want to use the ASWC-1 retain those steering wheel volume controls. If you don't have those controls, just tape them off, they will not be needed. You will need the ground for sure, but one is blue, the other is green right next to the black ground wire.

@MegaLalo2

8 жыл бұрын

yes those are the one am talking about

Do the steering wheel controls still work with the new install?

@ProvoBeastAudio

3 жыл бұрын

No, this model was not equipped with steering wheel volume controls.