2010-2015 Toyota Prius EGR pipe cleaning

Автокөліктер мен көлік құралдары

3rd Generation Prius EGR pipe cleaning.
Tools:
amzn.to/2awcRDO 3/8 ratchet
or
amzn.to/2xtJimX 3/8 electric ratchet
amzn.to/2aJy9kF 3/8 short extension set
amzn.to/2aYXnIy 3/8 10mm deep socket
or
amzn.to/2axt8Zh 1/4 1,3,6" extension set
amzn.to/2btKbQd 1/4 10mm deep socket
amzn.to/2aZPqGv 10mm wrench
amzn.to/2aweq4t Pliers
amzn.to/2tbPDvO Drills
amzn.to/2tbG004 Brass, Nylon and Stainless steel brush set
Parts:
amzn.to/2b5169E Brake clean
Torque specs:
Hand tight
like and share this video!
If you have any questions or concerns, feel free to leave comments on our FB page.
Like us on Facebook
bit.ly/nutzaboutbolts1
and SUBSCRIBE!
bit.ly/NutzAboutBolts2
Intro: RavenProDesign
Music: Manic Bloom - Death and Conversation
/ manicbloom

Пікірлер: 300

  • @mmakipf
    @mmakipf Жыл бұрын

    I have a Lexus CT, which is the same engine system as Prius. I was depressed with the engine vibration for the last couple of years. I brought the car to multiple dealers, and they replaced plugs, battery, tires, etc, charging me many $k. Then I found this video. I followed the instructions, and the vibration is gone. You saved my life!!

  • @NutzAboutBolts

    @NutzAboutBolts

    Жыл бұрын

    Glad it helped 👍🏼

  • @joerodriguez457
    @joerodriguez4573 жыл бұрын

    You have to also pull your intake and clean the 4 egr inlet holes that flow into the intake really good... You can instal brand new egr valve and cooler but if those 4 holes are blocked car will still not run correct

  • @yourmothertrebek
    @yourmothertrebek4 жыл бұрын

    I don’t even have a Prius and I still found this entertaining to watch. I like how he managed to do this, not drop a bolt or yell out a curse.

  • @moushe786

    @moushe786

    3 жыл бұрын

    I have the same question.

  • @kingnewlevel8664

    @kingnewlevel8664

    3 жыл бұрын

    Lol

  • @davidwollpert5276

    @davidwollpert5276

    2 жыл бұрын

    He’s a mellow dude, for sure. A good example, I can tend to go the other way when working on cars. But with this example of how to be calm while working on a car I can change my ways…a bit.

  • @CarDoctorUSA
    @CarDoctorUSA Жыл бұрын

    I have a beautiful Prius. in just half a million miles. very clean and quiet. I only do 200 miles deliveryx a day. there is no problem at all. no oil reduction. greetings from boston

  • @mizudu4306

    @mizudu4306

    6 ай бұрын

    Mine is a quarter of millions miles, and is running like the first days, just oil changes, transmission and filters. Toyota Prius 2012 second generation.

  • @e.g.5385

    @e.g.5385

    5 ай бұрын

    what all do you do for maintenance?

  • @pillarservice9738
    @pillarservice97382 жыл бұрын

    Your camera positioning is perfect. Makes your videos very easy to watch and figure out what your looking at.

  • @NutzAboutBolts

    @NutzAboutBolts

    2 жыл бұрын

    Thanks!

  • @downrangephotography1780
    @downrangephotography17806 жыл бұрын

    Just did it on my 2010 Prius (150K+ miles). A few notes: 1. There's no real need to unclip the plastic bracket, just move it out of the way. 2. Absolutely no need for a bronze brush and the drill. Blast that pipe with throttle body / carb cleaner, and it's shiny as new. 3. Wrap a piece of lint free cloth on a stick and saturate it with carb cleaner. Wipe the corresponding manifold & valve holes with it, rinsing with a stream of carb cleaner after each insertion. Basically same technique as removing the ear wax: don't push it in )

  • @victorvodka

    @victorvodka

    5 жыл бұрын

    i assume this is to fix an ODBII 401 error -- which just popped up on my 2010 Prius

  • @Mu5tyLaghmani

    @Mu5tyLaghmani

    4 жыл бұрын

    I got P2111 code and it means throttle actuator control system

  • @darrenit7498

    @darrenit7498

    4 жыл бұрын

    @@victorvodka Did you try it I also have a 401

  • @rajnadar6555

    @rajnadar6555

    Жыл бұрын

    You probably won't read this since it's been 5 years but the bottle of carb cleaner I got said it's not recommended for Fuel injected vehicles...and unless I'm mistaken, the prius is a fuel injected car.

  • @sriss1414

    @sriss1414

    Жыл бұрын

    @Raj Nadar The instruction is for using it during running conditions. We use the carb cleaners offline so really it doesn't matter. Gumout brand is best it evaporates in 10 minutes. Gunk brand takes 4-5 hours to evaporate. For cooler and egr use 1 full bottle of Gumout.

  • @ryanvega4196
    @ryanvega41966 жыл бұрын

    Thanks for the video. Did this on mine with 90k. It def needed it. A few notes for others. I was unable to get the mas connector off, but there's enough slack to move it out of the way safely. Second i didnt have a small opened end metic wrench set. But i was able to get my 1/4 10mm socket in between the harness wires to remove the front 2 bolts holding the pipe

  • @shameerrrrr4980
    @shameerrrrr49804 жыл бұрын

    Had the egr code on my Prius.. this video helped and saved me over $200 bill. Thank you very much

  • @devoidbmx1

    @devoidbmx1

    3 жыл бұрын

    Is the car still fixed? Did you clean the intake manifold, EGR cooler, and EGR valve as well?

  • @caryt9435
    @caryt94353 жыл бұрын

    Thank you so very much! I followed your video step by step and it resolved the issue and the engine warning light is now off and saved me time and $$. You're awesome!

  • @ChowTY42

    @ChowTY42

    Жыл бұрын

    What was the engine warning code for this?

  • @Phil8219
    @Phil82194 жыл бұрын

    Really helpful video, I had a noisy engine and juddering at idle on a Lexus CT (same engine). I did find in the end it was the spring on top of the EGR valve that was jammed open causing the problem, lubricated it and gave it a work up and down to free it off. But did give the pipe in the video a clean at the same time I had plenty of crap inside also.

  • @matthewdoyle8644

    @matthewdoyle8644

    3 жыл бұрын

    So after your Lexus ct ran a lot smoother at idle? My ct is juddering at idle too.

  • @Phil8219

    @Phil8219

    3 жыл бұрын

    @@matthewdoyle8644 Yes, it ran perfectly after I freed off the sticking EGR valve.

  • @cgrinna
    @cgrinna2 жыл бұрын

    Thanks for doing this video. Dealer wanted over $300 (estimate), followed your video and did it myself. Note: didn't remove the plastic tab next to left port/tube, just pushed it aside. Vehicle seems to run better after it was done. Thanks again. cr from Florida

  • @NutzAboutBolts

    @NutzAboutBolts

    2 жыл бұрын

    Nice work 👍🏼

  • @DominiAeternum

    @DominiAeternum

    Жыл бұрын

    Did that stop your cold start shaking? Or do you need to take off and clean or replace the EGR for that?

  • @Pyro-01

    @Pyro-01

    10 ай бұрын

    I live in Florida which dealer quoted you $300 I'd pay $300

  • @NINJA2da
    @NINJA2da4 жыл бұрын

    I went beyond and took out the entire EGR assembly/cooler to clean. I used an extra reach 12 mm racheting wrench for the three nuts in the back and slowly reached the 4th HIDDEN 12 mm nut underneath the EGR cooler (with another tool). Used a Torx E8 socket for the two long bolts in the back of EGR cooler. Good video NAB!

  • @Ass_Burgers_Syndrome

    @Ass_Burgers_Syndrome

    3 жыл бұрын

    I'm doing all this over the next few days. Too much for me to handle in one sitting.

  • @justinstoute595
    @justinstoute5953 жыл бұрын

    Thanks! Engine light went off a day later after watching your video, great instructions!

  • @kasuraga
    @kasuraga Жыл бұрын

    I'm glad you have all these egr cleaning videos. I just bought a 2012 with 186k on it and I don't think the EGR has been cleaned out. Would be a very good idea to clean the cooler too while I'm at it. I'll probably soak it all in the sun to try and get it broken up.

  • @NutzAboutBolts

    @NutzAboutBolts

    Жыл бұрын

    People use oven clean chemical and soaking it over night to break down the carbon build up in the cooler and egr pipe.

  • @kasuraga

    @kasuraga

    Жыл бұрын

    @@NutzAboutBolts Yeah I was thinking about using something similar. Instead of leaving it overnight, I figured a decent az afternoon would do a good job of baking it

  • @oxf1racing484
    @oxf1racing4846 жыл бұрын

    Great video! Thanks I owe you a very large beer when you are in San Diego

  • @NutzAboutBolts

    @NutzAboutBolts

    6 жыл бұрын

    haha thanks.

  • @jimscheltema670
    @jimscheltema6706 жыл бұрын

    I haven't done this job, but it looks like if you passed a rope through the pipe/tube and pulled it back and forth with solvent on it, it could clean the middle of the pipe that you couldn't get to,

  • @davidwollpert5276
    @davidwollpert52764 жыл бұрын

    Just did this, your instructions were great. Thank you. 2012 plug-in Prius with 175,000 miles.

  • @yevlyan4060

    @yevlyan4060

    Жыл бұрын

    hows your prius right now, i know its been 3 years from time you wrote this, i have 2012 prius plug in too, with 204.000 k moles. hows your car now?

  • @davidwollpert5276

    @davidwollpert5276

    Жыл бұрын

    @@yevlyan4060 hi, it’s running great. I have cleaned the EGR pipe again, but it wasn’t too gunked up. I have 240,000 miles on it now.

  • @yevlyan4060

    @yevlyan4060

    Жыл бұрын

    @@davidwollpert5276 gOOD news friend, i bought mine 2 weeks ago 2012 plug in with 204.000 m, the older guy took good care of it, he documented every record from toyota dealership, clean title , no accidents. i bought it for $5.400, do you think its a good price ? i was reading all these nightmares about head gaskets. But to be honest with i see a lot of people doesn't have this problem, and they around 300 k mark. You kind of made me feel better when you sad its 240 k and its running great, can you give me any advice ??? since im new to Prius. p.s. Im in love with this little car ) coming of 2005 lexus ex 330. thank you in advance

  • @davidwollpert5276

    @davidwollpert5276

    Жыл бұрын

    @@yevlyan4060 that’s an OK price. Have you cleaned the EGR pipe, like in this video. That’s related to head gasket problems. I would definitely do it if I were you. It’s quite easy.

  • @yevlyan4060

    @yevlyan4060

    Жыл бұрын

    @@davidwollpert5276 no I did not . But I will this following week. Pipe is easy, I was thinking about EGR coolant or something like this, this one is tricky, but hopefully I'll do this. My engine seems fine, coolant level stays on level. I'm in New York and when I start engine, for a few seconds I do have a little bit white smoke, but this one is clear and a little bit. I think its because its cold and humid. My friend brand new car 2023 lexus rx 350 does same with even more white clear smoke. So I think its normal.

  • @dmarinon
    @dmarinon2 ай бұрын

    after cleaning egr valve, cooler, pipe and intake manifold, gas mileage on my 2013 Auris TS dramatically increased. Especially egr cooler was full of black carbon that took several degreaser baths to wash away.

  • @sfgators
    @sfgators8 жыл бұрын

    Great video! I found your explanation and video easy to follow. Now I just need to find the time to clean out my EGR pipe!

  • @NutzAboutBolts

    @NutzAboutBolts

    8 жыл бұрын

    lol nice! glad we could help

  • @joerodriguez457
    @joerodriguez4573 жыл бұрын

    You are supposed to remove the intake and clean the 4 small egr holes and install a catch can on you pcv to catch all the oil blow by...

  • @kimoclyde
    @kimoclyde7 жыл бұрын

    Next time try letting the pipe soak in parts cleaner for a while, if you're not in a hury. Also, use some vinyl gloves or something. Those chemicals are harsh. Good job.

  • @dan5979
    @dan59797 жыл бұрын

    I love your prius videos. You are helping me out so much. Thanks!

  • @hitchensthinksnot4778
    @hitchensthinksnot47788 жыл бұрын

    Unfortunately, that won't clear a P0401 code, in most cases. However, it is helpful to clean the pipe out. Here's what I did to correct the restricted flow problem. When you pull he plastic cover off of the top of the engine, you'll see the round (nipple-like) cover to the EGR solenoid. Remove the two Phillips head screws and pull the cover off, no need to disconnect the wiring harness. Unscrew the cylindrical magnet with the bearing on top. The shaft will be exposed. If you put a washer over the shaft, just covering the round disk, then screw the magnet back on, this increases the throw of the plunger, and restores the flow. If you look inside the cover, you'll see a small plastic ridge, it's covered with grease. Look closely and you'll see that it's worn down and not letting the valve open like it should, or used to. This is what fixed mine, and I just wanted to save headaches for others. It will take three run cycles to clear the code. You just saved some cash...HAPPY DANCE ! ! !

  • @davidmishiyev6079

    @davidmishiyev6079

    8 жыл бұрын

    If you could make a video explaining what you did and list links to the parts used in the description of that video (just like this video does), I would greatly appreciate it!

  • @jiffyliub

    @jiffyliub

    7 жыл бұрын

    My 2010 prius just coded p0401, and it looks as if it's out of warranty for a new egr kit from toyota. Is your fix keeping your car code-free still..?

  • @whathappenswhen4767
    @whathappenswhen47674 жыл бұрын

    Hey thanks so much for this video. I hope that you become extreamly popular on youtube

  • @cheaterbob7188
    @cheaterbob71882 жыл бұрын

    2012 Prius with 295k, Toyota dealership quoted me $1700 for this along with cleaning the intake manifold, throttle body, and replacing spark plugs and gas cap. I’ll be doing it myself.

  • @Greg1485
    @Greg14854 жыл бұрын

    Tips to PREVENT HEAD GASKET FAILURE: 231K - 2013 Prius. Just had head gasket replaced for $1,500. Could of prevented it if I cleaned/replaced EGR cooler around my second run of 80K or 90K miles? Maybe it happened to me a bit sooner because I cleaned my EGR cooler out about 90% +\- at 130k miles, + 1000 miles/week, 50K/yr. and maybe because of potentially more cold/heat cycles on the head gasket. Lots of people highly recommend 3rd gen prius owners clean or replace EGR cooler AT or BEFORE you hit every 100K miles. EGR cooler $178 new on ebay, $300 at toyota, part 25601-37010. Clean EGR pipe and valve with the intake manifold/throttle body. Replace PCV valve, optional oil catch can. X At 230K miles my EGR cooler was completely blocked up with soot (previous cleaning at 130K). My symptoms were brief misfire on #2 couple times every 100 miles and slow engine coolant leak into the engine. #2 spark plug and #2 set of 4 valves were pretty dirty. Head gasket and cylinder head was replaced with refurbished one. (6,000/3month warranty). Car runs great so far. 4th Gen Prius has improved this problem.

  • @ashleyryder6764

    @ashleyryder6764

    3 жыл бұрын

    WOW, this is EXACTLY my current issue and I'm at about 209K miles. My mechanic wasn't sure exactly what the problem is (not a lot of Prius' here in the mountains) and now I have something to bring to him. How much did the EGR cooler cost you? Thanks!

  • @Greg1485

    @Greg1485

    3 жыл бұрын

    @@ashleyryder6764 Hi. yes I think all of 3rd gen prius have this issue above the first 120k miles and every 100k +/-. Blame toyota I guess for not creating a better EGR flow system. goodbye 1500$ :-0 I knew of the problem before i bought the prius when researching and it still happened to me, i was even planning on cleaning it before it happened. As I said in my first post it cost me 170$ on ebay but that is out of country and shipping time consider. search the part # or pay toyota $300 w/tax or clean the part very good and replace or buy the part and keep your old cooler to have it cleaned for the next 100k miles cleaning. clean cooler, pipe, valve, intake, replace pcv valve, i have not put an oil catch can in but that is optional and may help. I followed youtuber "nutzaboutbolts" and did everything myself. Good luck.

  • @Greg1485

    @Greg1485

    3 жыл бұрын

    @@ashleyryder6764 probably double check with trusted mechanic if they agree but if you have coolant loss and the coolant doesn't seem to be leaking anywhere except probably into the engine with the couple of misfires every hundred miles more or less than probably is failing head gasket especially at that mileage.

  • @jimsgaragetoys
    @jimsgaragetoys2 жыл бұрын

    I did this on my 2010 Prius with 116k miles and I removed the intake manifold. I was glad I did because all 4 runners were gross. I highly recommend taking off the intake manifold. It wasn't that hard to do. I also installed a new PCV valve with it off and an oil catch can to keep it cleaner down the road.

  • @eliasarroyo4929

    @eliasarroyo4929

    2 жыл бұрын

    Catch can on a prius? That awesome and interesting at the same time. 😂👌😎 What catch can do you installed?

  • @egn83b
    @egn83b8 жыл бұрын

    did mine at 56K it was dirty. I cleaned the manifold as well. easy.

  • @edwanalassaf2428
    @edwanalassaf24286 жыл бұрын

    Thanks this video is so helpful and useful

  • @alexadjekum1543
    @alexadjekum15436 жыл бұрын

    Really good video, thanks

  • @TheJosa007
    @TheJosa0073 жыл бұрын

    Thank you very much. I don’t know if I can gather the courage to do that. I’ll bet I’ll forget to put a part back

  • @azad76263
    @azad762636 жыл бұрын

    Thanks it was very useful

  • @towpacific
    @towpacific8 жыл бұрын

    he really nicely explain

  • @aarongutfreund5799
    @aarongutfreund57993 жыл бұрын

    Awesome video. Does the Rav4 Hybrid require the same procedure? If so, please post a video showing the location.

  • @NutzAboutBolts

    @NutzAboutBolts

    3 жыл бұрын

    I’m sure it does, but we currently don’t have a rav4 hybrid to demonstrate. 😅

  • @garthlocklin6355
    @garthlocklin63556 жыл бұрын

    Great video; just bought a '13 with 67K miles. I will look into doing this. I like your other videos also. Already changed the CVT fluid to synthetic recommended by PriusChat. The original stuff looked dirty although the dealer said wait until 100K miles. Why wait? Preventative maintenance is the key to long life. The car seems to shift a bit better also. Keep up the good work!

  • @sheldonhaynes4915

    @sheldonhaynes4915

    5 жыл бұрын

    garth locklin the car does not shift?

  • @aomanchutube

    @aomanchutube

    4 жыл бұрын

    This is the funniest comment.

  • @Xenirie
    @Xenirie2 жыл бұрын

    Awesome tutorial. Thanks!

  • @glamperjan
    @glamperjan11 ай бұрын

    Thank you so much For this video! You are a great mechanic!

  • @patambre902
    @patambre9024 жыл бұрын

    well organized. reminds me of military instruction at its finest..

  • @NutzAboutBolts

    @NutzAboutBolts

    4 жыл бұрын

    Thanks! Man, military instructions make me fall asleep, I’m not sure it’s a good thing 😂😂😂

  • @fahadsadat7831
    @fahadsadat78314 жыл бұрын

    What tools do we need in order to take out the EGR valve? Can you link them please. Toyota Prius 2010

  • @vkhiev
    @vkhiev2 жыл бұрын

    The proper way to clean is to take manifold out and clean 4 ports which are normally clogged.

  • @Jacksirrom
    @Jacksirrom3 жыл бұрын

    I'm getting a P219a code on my Prius V with 120k miles. Should I try this before cleaning the whole EGR and cooler?

  • @asap1142
    @asap11423 жыл бұрын

    Will doing this , will is stop my 2012 prius engine from sounding like it wants to blow up?

  • @theSingaporeKid
    @theSingaporeKid8 жыл бұрын

    Thanks!

  • @edb2105
    @edb21056 жыл бұрын

    Hey NAB, thank you for your videos. Last night my 2010 Prius started sputtering at low RPM. I also noticed a sulfur smell. I had never seen that before. The temperature is getting colder in Chicago too. When I drive at higher speeds, it drives normal. Any idea? No engine check light.

  • @Jacksirrom

    @Jacksirrom

    3 жыл бұрын

    Sorry this is 3 yes old, but I'm having the same problem with my prius. Did you ever get a light turning on? What did you do to fix it?

  • @cd7856

    @cd7856

    Жыл бұрын

    Having the same problem with my 2010 Prius. Will try this fix. @edb2105 Also, @Jacksirrom did you find a fix?

  • @elsondeSaantana123d
    @elsondeSaantana123d Жыл бұрын

    Thank you very much for asking for this black one that you put on?

  • @juliocesarrojascontreras5125
    @juliocesarrojascontreras51254 жыл бұрын

    The Toyota Prius Aqua is different. Can we do the same process on it? I think the egr pipe of the Prius Aqua is on top of the ignition coils.

  • @RichRotorhead
    @RichRotorhead5 жыл бұрын

    Why do I get the sense that NutsAboutBolts would make a great landscape artist? 🤔

  • @user-os8sq3uh4n

    @user-os8sq3uh4n

    5 жыл бұрын

    There are no mistakes. We'll just make them into 🌲 🌲. Just like that.

  • @davidwollpert5276

    @davidwollpert5276

    4 жыл бұрын

    Yes, he is quite mellow. That’s a god thing. Different from learning from some folks.

  • @A_Acars
    @A_Acars4 жыл бұрын

    How do you know if your erg valve needs replacing just a clean??

  • @fastheartmartvideos
    @fastheartmartvideos Жыл бұрын

    Thanks for this excellent video! I am going to try cleaning the EGR as you did here. I drive a 2013 Prius w 197,000 miles. I'm wondering if there is any chance a fuel filter can cause the engine to idle roughly? I don't know if my fuel filter has ever been replaced and I used some old gas recently. I don't see much about people replacing fuel filters on Priuses.

  • @NutzAboutBolts

    @NutzAboutBolts

    Жыл бұрын

    Follow the intake manifold cleaning, if you follow that video, you can remove and clean the EGR at the same time. You can also replace the pcv as well since it’s underneath the intake manifold. Also install a catch can if you can.

  • @seree_seree2965
    @seree_seree29656 жыл бұрын

    Thanks You.

  • @joechristo2
    @joechristo25 жыл бұрын

    After cleaning I experienced misfiring. Disconnected and reconnected coil one now it was running well for a week and now I have four codes after a week. I do get a rattle at times I wish I knew of this process before 150k. Codes are p0351 p0401 p3190 p0a0f c1241. I don’t really want to pay the dealer to fix but I think my next best step is to check coil one.

  • @reddv1

    @reddv1

    2 жыл бұрын

    Did you solve the problem, I have p3190 after doing this?

  • @Dr.Rihi1980
    @Dr.Rihi19802 жыл бұрын

    я сегодня помыл) пробег 122ткм по японии было грязно,но не сильно)

  • @Letsgo_ray
    @Letsgo_ray5 жыл бұрын

    Is there a reason why I should do this steps on my Prius 2015 with 40k odo on it?

  • @jimdavidson5208
    @jimdavidson52086 жыл бұрын

    Better wear eye protection when spraying brake cleaner. Get some in your eyes and you will holler out loud. Gloves to for spraying in your hand. OR, a better way to clean that pipe is soak it in Diesel. WAY less fumes and costs much less than canned death. Keep a gallon of Diesel in the garage to clean dirty filthy parts just like yours in the video.

  • @CCG0D
    @CCG0D3 жыл бұрын

    Hi NutzAboutBolts, I watched a fews of your videos and read your maintain guide on priuschat; however, I have not seen anyone mention that the high voltage battery was disconnected before fixing. I assume that’s a must, correct?

  • @NutzAboutBolts

    @NutzAboutBolts

    3 жыл бұрын

    You’re not messing with any high voltage parts, so it’s not necessary.

  • @MrRangerZr1
    @MrRangerZr18 жыл бұрын

    Upload some videos damn it, its summer LOL

  • @NutzAboutBolts

    @NutzAboutBolts

    8 жыл бұрын

    LOL its pretty hot outside still, we're still trying to find time to meet up to film, but work has been pretty busy and getting in our ways :(

  • @SteveTK420
    @SteveTK4205 жыл бұрын

    So is this preventative maintenance then? Do this to avoid future headaches?

  • @NutzAboutBolts

    @NutzAboutBolts

    5 жыл бұрын

    Steve M preventive maintenance and also prevents engine knocks from a dirty egr system.

  • @balancestatistic4298
    @balancestatistic42983 жыл бұрын

    You forgot to clip in the tubing around your filter into the 3 clips FYI lol but still a very helpful Video thank you.

  • @FailedZerg

    @FailedZerg

    3 жыл бұрын

    I was personally slightly triggered by this.

  • @mimbel12
    @mimbel122 жыл бұрын

    Good video thanks

  • @mattwernecke2342
    @mattwernecke23423 жыл бұрын

    How do I know if this needs to be cleaned? My Prius runs fine, but gas mileage is not where it should be.

  • @CarolinaAerialImagery
    @CarolinaAerialImagery2 жыл бұрын

    What size are the bolts that hold the pipe on? at 6:07 Im missing the lower one

  • @jaychong4690
    @jaychong46903 жыл бұрын

    Awsome !!

  • @projecthowto
    @projecthowto2 жыл бұрын

    Very helpful

  • @DarkstarDarth
    @DarkstarDarth3 жыл бұрын

    Would you recommend changing the pvc valve at this egg cleaning also?

  • @NutzAboutBolts

    @NutzAboutBolts

    3 жыл бұрын

    You can do it when you do the intake manifold cleaning since it’s right there when you remove the intake manifold.

  • @tmph1814
    @tmph18145 жыл бұрын

    What made you clean this EGR pipe, engine is running poorly or some warning lights went on, or bc you have high mileage on the engine then decided to clean?

  • @magleeventures2246

    @magleeventures2246

    3 жыл бұрын

    Probably because gen 3 Prius are known for gasket blowing up around 140k miles

  • @vuhuynh702

    @vuhuynh702

    3 жыл бұрын

    @@magleeventures2246 so, cleaning EGR valve will prevent head gasket in the future?

  • @moushe786

    @moushe786

    3 жыл бұрын

    I have the same question. My ct200h does rattle here and there on a cold start. Not like crazy though... Did do crazy rattle few time over the three years maybe 3 /4 times. Mileage is around 60k to 70k.

  • @1compaqedr8
    @1compaqedr88 жыл бұрын

    On my 2010 prius when the battery is low and at low speed acceleration (10-15%) there is a rattling sound. This only occurs when the battery is low and the engine is running to charge the battery. I read online that this could be due to a dirty EGR. What do you think? Dealer says its a bad hybrid battery and to trade the car in. I really don't think it's the actual battery.

  • @NutzAboutBolts

    @NutzAboutBolts

    8 жыл бұрын

    I've never experience that type of problem before, if there's no check engine light, I would check if there's anything loose... you can also post your questions on PriusChat to see if anyone else has experience the same thing you're having.

  • @MrCorrinado

    @MrCorrinado

    7 жыл бұрын

    This is exactly the problem I am experiencing now, with check engine light on, and I just brought my car to the dealer today and they diagnosed it as EGR valve. The solution they suggested was replacing the entire EGR kit, at a mere $900.

  • @twanderson123

    @twanderson123

    7 жыл бұрын

    1compaqedr8 did you find a solution to this problem? I had the EGR and EGR cooler replaced and still experience the same problem. The car runs absolutely perfect unless it is at low battery. It rectifies itself after charge to 3 bars. Thanks for all your help.

  • @aliyaworld5914

    @aliyaworld5914

    7 жыл бұрын

    Try cleaning the hybrid battery could be dirty

  • @judamlt5391

    @judamlt5391

    6 жыл бұрын

    TIMOTHY ANDERSON I have the same problem. Maybe you found out What really happen? Thanks

  • @kallisjazz
    @kallisjazz8 жыл бұрын

    Hi NutzAboutBolts, please excuse me for a rather back-to-basics question here: what would the effect be of not cleaning this EGR pipe and its associated ports? What aspect of engine performance would this affect, and by how much, in general, would you say, in your experience?

  • @NutzAboutBolts

    @NutzAboutBolts

    8 жыл бұрын

    +kallisjazz it can cause the idle to be rough due to the carbon build up in the passages, and can cause a check engine light.

  • @metrork1

    @metrork1

    3 жыл бұрын

    Will lead to head gasket failure

  • @elysianfields6350
    @elysianfields63507 жыл бұрын

    Great videos. Would you ever put a "oil catch can" on your prius? Would it effect the "computer"?

  • @NutzAboutBolts

    @NutzAboutBolts

    7 жыл бұрын

    that I'm not too sure, I don't mess with after market parts... You can try the Prius forum, I believe someone is going to try it.

  • @SteveTK420

    @SteveTK420

    5 жыл бұрын

    @@NutzAboutBolts and then you put an oil catch can on your Prius 😃

  • @NutzAboutBolts

    @NutzAboutBolts

    5 жыл бұрын

    Steve M yep. 😂😂😂 just for the viewers since everyone’s wondering how to install one.

  • @abdallahahmad5417
    @abdallahahmad54177 жыл бұрын

    Hi Can you make a video showing how to recharge the Prius 2010 air conditioner?

  • @NutzAboutBolts

    @NutzAboutBolts

    7 жыл бұрын

    I recently recharged my AC at the dealership. You need a machine to do that service.

  • @rondhole

    @rondhole

    4 жыл бұрын

    You can recharge with pure refrigerant without any additive, no oil. Just pure can, smallest can, and completely new charger hose. I would buy new 3 lines hose with pressure meter on it that can be connected to high and low pressure lines. So, you are not overcharge it. 3 line hoses also good to diagnose what the real problems, compressor, condenser, evaporator, or just low refrigreant. Just recharge it and do not use any oil unless it is ND11 (non-conductive oil). PAG oil for other cars will short your 110V AC compressor and destroy it.

  • @jonathanrivera283
    @jonathanrivera2833 жыл бұрын

    Hello friend did you help me with the code P0353 and the coil are oem new and the spark plug, its a 2010 prius

  • @sultanlife5385
    @sultanlife53857 жыл бұрын

    very understandable good job

  • @MH-ff4rj
    @MH-ff4rj3 жыл бұрын

    Did anyone’s Prius shake at start up for approx 10sec prior to this???

  • @BustedLeaf
    @BustedLeaf4 ай бұрын

    Excellent

  • @senanfouad7650
    @senanfouad76504 жыл бұрын

    I have a 2014 prius i have a p3190 (low engine performance). Driving me crazy.. Car dies and all the lights come on. After i let it sit for a hour it starts. Tried cleaning maf sensor n throttle body so far. My 12v battery is at 12.2v

  • @NutzAboutBolts

    @NutzAboutBolts

    4 жыл бұрын

    try cleaning the intake manifold, put in some fuel additives in the tank to clean the fuel pressure, and clean the EGR assembly.

  • @senanfouad7650

    @senanfouad7650

    4 жыл бұрын

    @@NutzAboutBolts cleaned egr cleaned manifold. Maf sensor + Fuel pump module and same problem. Not it starts for 10 seconds low rpm then it dies and you get all the warning lights

  • @mini-kl1ty

    @mini-kl1ty

    3 жыл бұрын

    @senan Fouad, my 2013 camry had a same problem. Two shops gave up. So I took it to toyota dealer. They try new fuel pump, new computer, chasing the cables kept my car for 3 weeks and then they told me I need whole new wiring. Told me about 3 grand. I told them no way. I found a local Repair shop dealing with the taxi and uber drivers. They told me no big deal, next day day called me car is fixed. It was relay pack in the fuse box underneath the hood that controls the fuel pump and computers. Cost me under $200. I hope your car is taking cared.

  • @senanfouad7650

    @senanfouad7650

    3 жыл бұрын

    @@mini-kl1ty in my case it was the fuel pump

  • @entao6425
    @entao642510 ай бұрын

    I loved your videos and have certainly bought off your Amazon referral links. I am wondering if you would have insight on this… I recently did the EGR clean out, the pipe, the ugh radiator cooler looking thing, and the EGR valve too. Everything reassembled and car runs like new. So much more power. And check engine light never came back on. But now I am smelling exhaust when I am driving close to a truck or whatever. Doesn’t matter if my car is on recirculating air or fresh air, it comes in. But if I am not driving next to a smelly truck, I don’t get smell. So smell is not coming from the Prius. Any idea what step I could have missed in the reassembly that could have caused the recirculating air to still be pulling in outside air?

  • @NutzAboutBolts

    @NutzAboutBolts

    10 ай бұрын

    Have you checked your cabin air filter? I noticed my vent closing for the outside doesn’t fully closed outside air but does have some air come in, I guess that’s normal to have a little bit of outside air coming in even if the recirculating vent are closed from outside air.

  • @entao6425

    @entao6425

    10 ай бұрын

    @@NutzAboutBolts I was gonna check that it may be due to change anyways. But just strange that I didn’t touch the cabin air filter with the EGR process. I don’t even know what to search for. But could the flap be stuck on outside air coming in? It definitely wasn’t letting that much outside exhaust in before.

  • @NutzAboutBolts

    @NutzAboutBolts

    10 ай бұрын

    @@entao6425 over time the cabin filter can get dirty from debris outside, check the outside air vent on the passenger side to see if it’s covered in dirt, dust or leaves and check the cabin filter. I myself haven’t experience any exhaust fumes or smell after this service… try having the engine hood open and vehicle on to see if you can mimic the smell in the engine bay.

  • @trisa9625
    @trisa96256 жыл бұрын

    hey bro were are u located?

  • @ew7894
    @ew7894Ай бұрын

    I have 120k on my 2013, will cleaning the egr pipe prevent the P0401 code?

  • @staxoffunk1863
    @staxoffunk18633 жыл бұрын

    Hey, I just had someone replace my spark plugs on a 2010 (side hustle mechanic) I was experiencing a 5mph MPG drop since Aug and the car has 160K and to my knowledge plugs were never changed. In any case he replaced them, the ones he took out were def in there for awhile but were not too bad looking. In any case he also check maf sensor and lightly used the tip of a flat head screw driver to scape a thin layer of carbon off. I have drive now for 2 weeks and no difference in mpg. I wanted to get the egr pipes cleaned. so can that be done without removing the windshied shroud and wiper motor assembly. I would like to get to bottom of it and your vid tells me you know a thing ot two

  • @NutzAboutBolts

    @NutzAboutBolts

    3 жыл бұрын

    You don’t need to remove the wiper cowl assembly

  • @staxoffunk1863

    @staxoffunk1863

    3 жыл бұрын

    @@NutzAboutBolts Thanks for quick reply. Is just cleaning that pipe enough to perform egr maintenance and can that be a culprit for lower MPG. My car threw a P0304 code about 3 weeks ago I had it reset after the sparks were replaced and the mechanic switched coil 2 and 4 so far the code has not resurfaced but the mpgs are still down about 5 from 45 average. I know it has 160K but hoping to get at least 250-300k out of it

  • @NutzAboutBolts

    @NutzAboutBolts

    3 жыл бұрын

    @@staxoffunk1863 it can, but over time, mpg will go down due to wear and tear from the engine.

  • @pokuanchoo4180
    @pokuanchoo41806 ай бұрын

    wow thanks for sharing

  • @frankt7055
    @frankt705522 күн бұрын

    Perfekt work

  • @fady7659
    @fady7659 Жыл бұрын

    Can this EGR pipe cause by bubles in the reservoir?

  • @John2022-i2q
    @John2022-i2q2 жыл бұрын

    this can cause gasket engine blow if don't clean?

  • @devoidbmx1
    @devoidbmx13 жыл бұрын

    Is this job even worth doing if you dont clean the EGR cooler, valve, and intake manifold as well? I presume if the pipe is clogged the other elements are clogged?

  • @NutzAboutBolts

    @NutzAboutBolts

    3 жыл бұрын

    You can add this when doing all the other ones.

  • @Gollf9
    @Gollf92 жыл бұрын

    Does the dealers not do this service I have 105k miles on my 2013 prius. Should I do this? Whats that cleaner your used called?

  • @alzajalijudgal2932
    @alzajalijudgal29325 жыл бұрын

    Hi bro can I ask something about hybrid vehicle if the vehicle is on mantinance mode then we can drive it or not if yes then its safe for us and also for vheicle

  • @sheldonhaynes4915

    @sheldonhaynes4915

    5 жыл бұрын

    Rashidali Ali you can drive it in maintenance mode, but why would you want to? The engine never turns off.

  • @alzajalijudgal2932

    @alzajalijudgal2932

    5 жыл бұрын

    @@sheldonhaynes4915 dear sir thank you so much for replying and sir I thought some time. If the high voltage betray has been failed than to reach some where that's why I asked you and sir plz tell. Me how to change the language of dashboard its in Japanese' how to convert it in English because I Dont know Japanese if u have any idea than plz help me and ones. Again thank u for replying

  • @TheJosa007
    @TheJosa0077 жыл бұрын

    Thank you very much for posting this video. At how many miles should I do this? does keeping a clean air filter will help keep the EGR valve cleaner? How often should I replace the oil on a car driven 5,000 miles a month? I appreciate your response. Thank you very much.

  • @NutzAboutBolts

    @NutzAboutBolts

    7 жыл бұрын

    over time, the EGR and EGR pipe will accumulate gunk in there, its just a preventative maintenance you want to do every 60-90k or so to keep it clean. Changing the air filter won't reduce or help with this because this is more coming from the engine itself. As for oil change, I change mine every 10k miles.

  • @aliyaworld5914

    @aliyaworld5914

    7 жыл бұрын

    E Galindo change your oils every 7k miles just to be safe don't push it till 10k which is the max recommendation from Toyota!

  • @vqman

    @vqman

    4 жыл бұрын

    If it's never been done, and your at 200k miles. Would one most likely need to replace the EGR and intake manifold? (Because of too much accumulation?) Getting some hesitation and a former Toyota Master Mechanic friend suggested replacing both the EGR and intake manifold

  • @metrork1

    @metrork1

    3 жыл бұрын

    @@NutzAboutBolts No, that's wrong, oil should be changed on the Prius around every 5,000 miles. The engine oil maintenance light will come on about 200 miles before it hits the every 5,000 mile range. This is a must. Protect your investment. Oil is cheep. The cost of replacing the motor is not.

  • @NutzAboutBolts

    @NutzAboutBolts

    3 жыл бұрын

    @@metrork1 go on priuschat.com and searched up 2010 Prius oil change interval revised to 10k miles.

  • @ryandonze9023
    @ryandonze90237 ай бұрын

    Any idea what would cause it to fill up often? My girlfriends car packs this egr pipe full once a year

  • @NutzAboutBolts

    @NutzAboutBolts

    6 ай бұрын

    its just due to fuel and air mixture that gets burned in the engine that pass through this pipe that causes the build up.

  • @scott9269
    @scott92692 жыл бұрын

    A+ video.

  • @vishwadevsehgal1488
    @vishwadevsehgal14887 жыл бұрын

    my dear friend all the knocking problem and noice problem I could remove it. Simple solution is that don't even open the whole EGR kit. just open the two screws of EGR socket and check is your EGR moving up and down. if it is not then all the problem in GEN 3 Prius is due to this EGR. I can send you detailed solution trust me I was banging my head to all the dealers and eventually I could diagnose and rectify the problem. now my Prius is running like a queen.

  • @enkhbatbayar2828

    @enkhbatbayar2828

    6 жыл бұрын

    Hey Mind Right Life Right, can you help a bro out? The cold season is starting and my GEN 3 did the "knock" yesterday, haha I wanna try out this, can you send me the detailed solution?

  • @vishwadevsehgal1488

    @vishwadevsehgal1488

    6 жыл бұрын

    Bro just open the two screws which will bring the electrical circuit out and check that is the valve going up and down. If it is then your dash board shall have 401 fault code. If not then the Egr valve needs to get cleaned and it needs to move freely up and down. Let me know if you were able to..

  • @tom2010ad
    @tom2010ad Жыл бұрын

    How often should it be cleaned?

  • @TheToufikzeidan
    @TheToufikzeidan4 жыл бұрын

    Hi, were you getting a violent shaking when you turned the car on? I did, I also noticed that there was no oil. I added oil and same issue. Thanks

  • @DoctorMeh

    @DoctorMeh

    3 жыл бұрын

    Where were you losing oil?

  • @TheToufikzeidan

    @TheToufikzeidan

    3 жыл бұрын

    @@DoctorMeh i was losing oil but the problem was a dirty EGR. The car was not getting enough air/fuel mixture so the car was shaking.

  • @DoctorMeh

    @DoctorMeh

    3 жыл бұрын

    @@TheToufikzeidan thank you !

  • @levijessegonzalez3629

    @levijessegonzalez3629

    2 жыл бұрын

    @@TheToufikzeidan Hello there. I have the same issue could you help me? It's been shaking on and off at cold startup for around a month or so but I just got a p0300 p0301 p0302 etc code today with an engine light. Drives fine otherwise. just on startup. (backround info. my water pump just went bad about a month ago and this happen roughly around the same time. 147k. don't know if it's related! not losing coolant though. levels are good) A couple videos were saying that means it's 100% a bad head gasket. But is that true? Or should I try the ERG, and also replacing the plugs / coils (they need to be replaced anyway). I do find it funny that ALL the cylinders are showing a misfire all at once...

  • @TheToufikzeidan

    @TheToufikzeidan

    2 жыл бұрын

    @@levijessegonzalez3629 you need to clean the EGR. There are bunch of videos on KZread showing how. It’s because the intake is clogged with carbon. I used a screw driver wrapped in a cloth with some WD40 and cleaned it. Never had an issue since.

  • @jasonhernandez1560
    @jasonhernandez15608 жыл бұрын

    Do you know after how many miles would be a good time to do this? Also I saw your Fan Cleaning video Every how often should I do that ? Thanks

  • @NutzAboutBolts

    @NutzAboutBolts

    8 жыл бұрын

    +jason hernandez I would say every 100k wouldn't be bad, same with the HV fan, which didn't seem dirty that much as the 2nd generations.

  • @jasonhernandez1560

    @jasonhernandez1560

    8 жыл бұрын

    +NutzAboutBolts how many miles were on the one you worked on?

  • @NutzAboutBolts

    @NutzAboutBolts

    8 жыл бұрын

    jason hernandez 100k

  • @jasonhernandez1560

    @jasonhernandez1560

    8 жыл бұрын

    Ok thanks

  • @NutzAboutBolts

    @NutzAboutBolts

    8 жыл бұрын

    jason hernandez yeah np, Prius maintenance is easy to take care of. :)

  • @alexrothschild5044
    @alexrothschild50447 жыл бұрын

    so i just did everything you did, luckily my egr pipe and the intake inlet werent completely clogged. i went ahead and took it a step further and removed the intake manifold to clean it out. 3 of the little ports inside were completely clogged up. i cleaned them out and put everything back together. when i went to start the car, it started fine, then the engine kicked on for about 5 seconds. it started to increase rpm and then shut off. check engine light and hybrid light came on. i'm waiting to get a scanner to check the code. any clue in the meantime what it could be? i made sure everything was connected and tight. possible gasket seal leak?

  • @NutzAboutBolts

    @NutzAboutBolts

    7 жыл бұрын

    did all the connectors got plugged back in place? never heard of it throwing codes when you removed the intake to clean it. I've read on the PriusChat forum that people remove the intake manifold and EGR and pipes to clean the oil deposits and never had any issues. I would get it scan and see what the code reads before proceeding forward.

  • @alexrothschild5044

    @alexrothschild5044

    7 жыл бұрын

    Ok I figured it out. Turns out I forgot to connect the hose to the intake manifold. Once I connected that it was all good. Thanks for all your videos

  • @NutzAboutBolts

    @NutzAboutBolts

    7 жыл бұрын

    Nice work.

  • @aliyaworld5914

    @aliyaworld5914

    7 жыл бұрын

    What tools do you need to remove the intake manifold to get to the holes my car was very dirty when I got the egr out and cleaned it

  • @vqman

    @vqman

    4 жыл бұрын

    If the egr pipe is completely clogged, does one need to replace egr, intake manifold and that pipe?

  • @dashdorjpurev7679
    @dashdorjpurev76793 жыл бұрын

    and what this video is about, you only cleaned one pipe? how about intake manifold, throttle body, EGR valve?

  • @vulk86
    @vulk863 жыл бұрын

    Isnt it better also remove the egr valve?

  • @brucewayne2773
    @brucewayne2773 Жыл бұрын

    You were half way there cleaning the EGR system. Very important to clean out the entire cooler too.

  • @NutzAboutBolts

    @NutzAboutBolts

    Жыл бұрын

    Yep, we have a separate video for that 😅

  • @Gopher599
    @Gopher5995 ай бұрын

    Great video. I just did mine. Forgot to plug electric connector into egr valve completely now I have an archived p0403. Anyone know how to clear it? Thanks.

  • @NutzAboutBolts

    @NutzAboutBolts

    5 ай бұрын

    Use an OBD2 scanner.

  • @Gopher599

    @Gopher599

    5 ай бұрын

    @@NutzAboutBolts I used a scanner to clear the code however when recheck for dtc I still get the p0403 however it’s “archived”. It’s a pdtc if that matters.

  • @NutzAboutBolts

    @NutzAboutBolts

    5 ай бұрын

    @@Gopher599so is the light still on? Usually it’ll be archived once you got a code and cleared.

  • @Gopher599

    @Gopher599

    5 ай бұрын

    @@NutzAboutBolts engine light is off. How long is it archived for?

  • @NutzAboutBolts

    @NutzAboutBolts

    5 ай бұрын

    @@Gopher599 not sure, but usually it’ll have a memory of it for future reading on the scanner. I wouldn’t be worried since it was an accident and not an actual problem on the car.

  • @ChowTY42
    @ChowTY42 Жыл бұрын

    How often should you clean the EGR valves and tubes? Every 80k miles?

  • @NutzAboutBolts

    @NutzAboutBolts

    Жыл бұрын

    I'd do it every 150k

  • @pgreenx
    @pgreenx Жыл бұрын

    Can I use this for the 4th gen?

  • @patrickwojo
    @patrickwojo2 жыл бұрын

    I did this and it didn’t resolve the issue. Unfortunately I think the intake manifold has to be cleaned completely in my situation :/

Келесі