My daughter just bought a '08 Avenger (her first car), and she's got a bad ball joint that I'll take care of for her. Great video! Extremely helpful!

@FixingWithPassion

Жыл бұрын

Very nice!!

I have not one in a while. Good job.

Great video! Much love from Cen Valley CA!! My 2011 3.6L Avenger jerks side to side when on the grooved freeway roads, and I'm looking to replace my ball joints Much appreciated!! Liked and saved 😇👍

@FixingWithPassion

3 жыл бұрын

Nice!

Great video and good work

This video is awesome. Thank you!

I'll be doing this same job on my dodge journey tomorrow, your guidance will be very helpful. Thanks for the vid!

@FixingWithPassion

2 жыл бұрын

Right on man!

@pascalroutier5178

2 жыл бұрын

@@FixingWithPassion same for me!!! Thx Nathan!! Hi from France

Gave up on my generic ball joint press for this car! Threw the whole thing on my work bench, got my cutoff tool and strarted grinding some metal off it around the rim. Then hosed it down with pb blaster, took a hammer and after a few minutes of therapeutic violence...it shot off onto the floor. Then...to get it on. Cleaned out the hole, greased it and the new ball joint seated with the cup and hammer only. Went on pretty smooth. Had to disconnect so much to do control arms and ball joints I now feel like I'm Chrysler-certified for front end repair🤣

@FixingWithPassion

2 жыл бұрын

Nice!! You saved $450 Buy a Steak tonight!~

I did the sway bar links for my CRV and only used the impact driver even though is supposed to be done wrench + allen key, I'll try it with the Avenger also, great video.

@FixingWithPassion

3 жыл бұрын

Nice!!

Put the balljoints in the freezer.. When ur ready to put them in just heat up the hole with a torch, cold balljoint will press in by hand.

@FixingWithPassion

4 жыл бұрын

Nice!

Great video! Nice work.

@FixingWithPassion

Жыл бұрын

Thanks for the visit

Wow that’s a lot of work !! I just undone the nut and took the clip off use a kind bar and knocked it out !! Took 5 min

@FixingWithPassion

3 жыл бұрын

U B fast dude!

Great vid!!! Thanks for posting

@FixingWithPassion

Жыл бұрын

Nice!!

Good Video, appreciate it.

great Job

thanks

Thanks for you video

@FixingWithPassion

3 жыл бұрын

;D

I live Bloomfield Iowa. Thank you for the video

@FixingWithPassion

3 жыл бұрын

Nice!!

@JimmyJPp

3 жыл бұрын

Born and raised in Ottumwa. I was one of the lucky ones that escaped 😂

Muchas gracias me sirvió mucho Saludos desde la paz baja California sur México 👍

@FixingWithPassion

Жыл бұрын

Nice!!

, good information

@FixingWithPassion

3 жыл бұрын

' nice

thx! It's very good video :)

@FixingWithPassion

3 жыл бұрын

Word!!

That was easy! :-D

Thanks for the video, very informational.

@FixingWithPassion

4 жыл бұрын

;D

How did you know they were bad what are the symptoms

I have a 2008 dodge avenger sxt I so wish you could do this for me nevertheless this video is extremely helpful

@FixingWithPassion

3 жыл бұрын

Nice!

What is the part number for lower ball joint that you got from Amazon you did not tell us what the lower ball joint part number was

Michael Lanman Bloomfield Iowa 52537 Watching your video again 08/05/2022

@FixingWithPassion

2 жыл бұрын

Nice!~~

Why did you take the sway bar link loose?

Took you longer to take everything else out then the ball joint haha. Great job

@FixingWithPassion

4 жыл бұрын

I know Right!

Good work, but I believe that it is necessary at the very beginning of the work to loosen the hub nut before dismantling the wheel.

@MahlikMadeThat

4 жыл бұрын

from my knowledge there is no hub nut, just 5 lugs

Thanks for the vid. It was my guide to changing my own. Went like clockwork, but didn't seem to need to touch the stabizer bar link. Have you replaced the subframe? That's next on my list of things to do.

@FixingWithPassion

2 жыл бұрын

Nice!

Have a Sebring, they don't want to budge. Car did come from a bigger city that uses a lot of salt in the winter. Might need steering knuckles that aren't so rusted. Back to the junk yard I guess. Damn..lol

"I'm just gonna use a hammer" *DUNG* *DUNG*

After you put the ball joints in do you have to get a front end alignment after you put all back together

@FixingWithPassion

Жыл бұрын

I never did. Had no issues with tire wear.

@michaellanman4440

Жыл бұрын

@@FixingWithPassion thank you my tires wear out on the Inside Edge

@DavidLeeBroadhead

Жыл бұрын

@@michaellanman4440 how old are you front springs? Sounds like they may be the culprit of your tire wear.

Exelente video Sr.Thank you ! 🙏👍

@FixingWithPassion

7 ай бұрын

Word!

I wish you would have told us the part number for the ball joints

Im hoping i get mine off with a ball joint pulled without pulling all that stuff out

Lewisbrug PA

@FixingWithPassion

3 жыл бұрын

Nice!

You can remove the ball joint on vehicle and no need to remove the knuckle.

@FixingWithPassion

Жыл бұрын

If you have the right tools....

Why are you using non impact sockets with an impact?

@FixingWithPassion

4 жыл бұрын

because I can

@Onemanstrash1

Жыл бұрын

@@FixingWithPassion Hahahahaha , awesome , same reason I use screwdrivers for pry bars 🙂

damn it i really wanted to see how you assembled the clamp and you skipped that part

Fort Worth Texas here, yeeyee. Gitter did !! Damn dodge piece of puppoo . I love my Chevy

@nopenothappening2923

2 жыл бұрын

Damn... you came all the way here from Texas just to make yourself sound stupid. Congrats

@Roland-Henry

Жыл бұрын

Hopefully not a Cruze 😂