Fixing and Working on autos for 45 years
Fixing Random things now and then
Reviews on products
Saving Money and time... Priceless!
Dirty hands Optional
Looking For Products and Sponsors
for video back ground shots
For Inquiries
~~EMAIL is for OFFICIAL BUSINESS INQUIRES ONLY~~
Non-business related messages are not received
Пікірлер
Buy a shim
Here in 2024 just save me from using the crowbar, lmao 😂
I do not want to be banned!
My car over heats sitting at an idle and it hasn't always done it and it is a 2011 ford fusion sel where should I start to get that fixed because the mechanic I brought it to couldn't find the problem
What if the hose keeps popping off? New clips new filter and all? It will start... But after a few of running the hose pops off
thanks for not showing how to fit the emergency brake on only reason I clicked on this.
Wat hing from UAE 🇦🇪
Nice!!
So the driver side didn't work it?
Nope
bro. you might be my savior. 2015 Burban, changed master cyl, shop is telling me i have a bad vacuum pump i figured give it a shot, doesn't make sense to me but this sure does. I am def going to try this before the pump!
Nice!! Let us know!
GOTTA WATCH OUT FOR THAT DEBREEZE
Ha ha.
Mine keeps leaking and I've replaced so much of the AC system. I'm so frustrated that I could spit nails right now
O my!
Great video. Just wondering how that rusted filler tube create the back pressure to stop gas coming into the tank? Thanks
Let me check
I was getting ready to give up but man hopefully it’s the abs module..I have an impala 08 .
Let us know!!!
How long does it take to dry the seats later ? Or Do you just let it air dry ?
Pretty fast Iif its warm out!
I have these and they do work. Forget the ones from Harbor Freight those are junk. I got mine at Tractor Supply
Did u drive 550 miles and if ur cat had a whole or broken inside yeah wont work this is for clogged cats
Yea did not know hole watsthere till aftwords
Cool, thanks, I'll be doing it this weekend...I hope it's just the corrosion
Nice!!
when i saw this video i saw the number of likes was the devils number
How hard is it to replace
How hard is it to replace.
Did you use the turbo gasket?
So I just checked mine. Is the little flap supposed to stay open?
No. Its suppose move freely while closed.
@@FixingWithPassion ok the flap on my car moved easily. I’ve changed my evap canister & changed the purge solenoid. What else could the issue be? The roll over valve?
I have a 2009 model with the 2.3 Mazda 4 cylinder engine. I have the 5 speed auto trans ,the trans works ok , but one issue I have is that starting out from a dead stop it will shift fine from 1st to 2nd , and 2nd to 3rd, however when it goes from 3rd to 4th it shifts hard ,4th to 5th is fine. It's the 3rd to 4th that shifts hard. Any ideas what could be causing that ? I'm suspecting a shift solenoid ?
03 trailblazer LT , 187 k miles . love it best suv. the beach, snow light trailering. Had it loaded up with wood , compost all kinds of material Rides like a comfortable car
Yes it does!
When adjusting from the opening on the back. Which way tightens drive side and which way passenger side. I got confused looking when you did the drivers side.
Good job
I have problems I hope you never have! It started with me putting my SUV online to sell . Guy comes looks at SUV and asked questions… He wanted test drive. I took his license and his registration checked information it was all good and he took SUV for ride! About 30 minutes later I call him and I go right to voicemail no message just leave message full! I checked for other phone numbers. On my phone then called police ! I told them what happened and they took info and called it in on radio . Asked me if I knew him anyone with him . Asked me how he got to my location? He had a friend drop him off who went to local connivence store! Asked me if zi had photos I said yes . In car but may be on cloud. It was ! Could see other person but no plate or any really clear shot ! I contacted. Everyone I know to tell them to keep eye out for my car! 2 hours later I called insurance company. They took all info . I couldn’t stop walking in circles ! I recalled I did know someone who know him Not as friend but kind of knew him from crowd of people they happen to know. Days turned to weeks and insurance company got back to me saying because I gave him keys it was an authorized use! WHAT? Because Zi handed him keys it wasn’t insured theft ! OMG I’m out a $25,000 vehicle! Police said they will let me know if they have any info ! 14 months go by and I’m searching a area size of Manhattan! I used everything you could possibly think of! Search would be good movie . I started watching every road .. I scanned a street and saw my car in someone’s driveway . I went directly there verified VIN Took thjngs out got in with spare key , as I’m driving away he calls snd says he’s been paying it off ! I told him I’ll be happy to meet him. I called police and they said little they could do. Said I could sue him . Oh yeah ! Ummmm I sued him . This happened in Florida I was born and raised in New York City, Bronx Tremont area I sued him !!!!! Yup ! He put 100,000 miles on the car . Only I know that ! Repo man .
Great video
Nice!!
Great video very helpful.👍
Word!
Great job..btw whats the company you got the cats from..got to do both sides
I search on eBay. Good deals on there. Just make sure you have NO engine codes!
20 view your at 19k and still growing its helping me out thanks for posting this for everyone
O wow!! Thanks man!
What about if you used an impact wrench? Seems like that would make it easier and the movement would help break rust. EDIT: Using an impact wrench worked instantly to push these out with this ball joint separator set. Bought a corded one for 80$ from harbor freight and took a couple seconds to push it out.
True. Most people don't have that tool. So I try to use what most folks have from my results.
@@FixingWithPassion I bought a corded impact wrench for 80$ from harbor freight, was saving a ton of money by doing the work myself so could justify it. I ended up buying this ball joint separator tool set you used with the impact wrench and it came off almost instantly and my studs and nuts were seized BAD. Thanks for the video though as it gave me the idea to try it and didn't want to torch next to my gas tank.
Went to pull throttle body & replace EGR (for hellovit :) Decided to yank plenum & replace injectors first. Give me some wiggle room, right?? *Shouldn't we all just buy new cars? 😂
Im gonna help my dad replace the lower control arms on both sides on our 2006 chevy trailblazer lt because they are causing our tires to go bald on the inside
Nice!!
I was recently in a situation where I was junking my car in a week and got a flat (sidewall tear). I didn't want to spend money on it, and I came across your video for some advice. I ended up driving 375KM (230miles) on a donut on the right rear. No issues, but it was city speeds only. For anyone seeing this, here's another confirmation that it's OK to go farther if you're careful (go slow on 90 degree corners and big bumps).
Geez I wish I was this guy He can't seem to do anything wrong . Amazing
I have a donkey now.
Nice video. Mine don’t start either change, spark plug, new gas, cleaned the carb bowl and the little jet. No go. Ready to toss it bought it 2016. I see new electric ones for $150 with the same psi 2800. I’m not sure it’s worth to fix any more.
yea true
Good job buddy...u have the link for that piece?
Thanks
Nice!
Thank you for the great video Sir!
Great!
Learn to not talk as much and just get it done
Nice!!
i have the same issue on my f150. inlet hose was super hot and outlet hose was warm. has only warm air when set to full heat. might be good practice to do a full coolant flush
Yes!
Thank you sir, i fell victim to an incompetent shop.. they quoted $900 to fix their mistake after the fact. Will have to start doing oil changes myself again.
Yes I absolutely love Pizza ! 🎉
I have a 2006 and I discovered that a connection was loose and it works on 1 through 4 but not 5. I should have power at the wire but I dont
O my!
The hardest part about this job was getting the belt back on you do not have to remove the notormount bolt of you bring the back side down first and spin it a few time it will come out and go back in no problem!!!! Thanks for the helpful video!!!
Nice!!
Hi i did that an it didn't help, so im going to a thinker oil an hope it helps, it only has 112750 miles on her, Now u know.
Cool...Might Work.
How about a p0300 + p2097 code combo . I replaced both O2 sensors and cat converter
Thank you so much.
i have a 2016 ford f150 2.7 ecoboost, the person who owned it drove it up lots of hills set a permanant turbo underboost code, i bought vehicle we cleared the regular codes and light i have driven more than 20 drive cycles almost 700 miles its still there no engine light nothing runs great, i dove drive up hills dont have any, but what could take this so long to either give me an engine light or clear the permanant code, is it worth replacing the computer