I have scoured the Internet, read the instruction sheet for a new ignition lock cylinder and watched countless videos, and this video is by far the most complete and best explanation of how to re-code a Malibu or Saturn from start to finish and the only video on the internet to tell everything you need to know and how to remove, re-code for the original key and re-install a key lock cylinder. Outstanding video....many thanks for posting it.

I just changed the one in my wife's car just from watching this video, appreciate you taking the time to make it bud 👍

Excellent video, thanks for posting.

Ok after pulling put pin 3 . What are the rest of the PIN numbers ?? After 3 then what ??

I replaced my ignition switch because my key gets stuck. But now maybe the cylinder is bad? My key got stuck in the ignition again but its only when I insert that cable into the switch. Could my cylinder be bad as well? I'm thinking it's something else since I can have the cylinder in my hands and insert and remove the key..

@newbster9021

2 ай бұрын

Did you ever figure out this problem? I may be having a similar issue

@Bevans_slow_stang

2 ай бұрын

I replaced the switch and cylinder. It fixed the issues right away

Whats happens when you don't have a key to turn it?

@fer8888888

3 жыл бұрын

at 2:42 you can see the metal spring tab sticking out at 4 o'clock. That won't press in to release it. Maybe the dealer can make a key as they should have the code for that car. Or you need to pick the lock. Or drill it out from the front till the inside come out, or remove the whole assembly and drill out that tab till you get it out. Or buy the entire assembly in the dash and replace it.

So I literally just got my wife's car out of the impound shop.. just earlier today the damn key broke inside the cylinder.. smfh.. I now how half the damn key inside the car.. in the parking lot of a CVS.. praying to god it doesnt get towed.. AGAIN.. and cost me another $600... any suggestions?? I'd like to just buy the entire damn ignition cylinder with key n all cheap or not theres a couple on Autozone, O'Reiley's, ect., may not be the best but I know they'll suffice for now.. therefore I have no key essentially to pull the cylinder out with or even turn over to accessory as you have.. I suppose I'll have to pick the lock in some way??

Where did you order the kit???

@fer8888888

11 ай бұрын

Directly from a gm parts store on line

@fer8888888

11 ай бұрын

Or any dealer

@gettebegay4537

11 ай бұрын

@@fer8888888 thank you

Can you tell me where to press to pop out? No seeing it and not able to pop.

I can't find this ignition cylinder anywhere I ordered one of Amazon it was different can u provide the source for this item please n thank u