Thanks Lonnie. It's people like you who make KZread great!!

@LonnieJohnson1

7 ай бұрын

Your welcome and thanks!

Very good explanation of how to remove the carb for this model.

@LonnieJohnson1

3 жыл бұрын

Thanks

Thanks much for taking the time to make this video. It was very helpful and much appreciated!!!

@LonnieJohnson1

2 жыл бұрын

Your welcome

About to take out my dad's 400 carb, thanks for the step by step on how to get to it!

@LonnieJohnson1

3 жыл бұрын

Your welcome

@smackdabtkb

3 жыл бұрын

@@LonnieJohnson1 Carb all cleaned out and put back together, purring like a kitten! Thanks again for your awesome video. I did end up taking out the choke and unhooking the throttle cable from the thumb lever so I could really clean out all the fuel and air channels on my workbench since I didn't have a cool pan to disassemble it like you have.

Very informative video. You saved me from having to remove the rear fender to get the air box out to slip out the carb.

@LonnieJohnson1

Жыл бұрын

Thanks

Great video. Very informative.helped me get my carb out and fixed my issue.

@LonnieJohnson1

Жыл бұрын

Cool!! Thanks

Thanks!! Greetings from Argentina!!

@LonnieJohnson1

3 жыл бұрын

You're welcome

Thanks helped me out with a couple things

@LonnieJohnson1

3 жыл бұрын

Your welcome, glad to help.

I have an 08 and the other day it was cutting out. I changed the oil and cleaned the air filter. After changing the oil it started blowing white smoke. It didn’t before the oil change. Also if I give it any gas it immediately dies. Is it a fuel issue or do you think I just need to clean the carburetor? Thanks for the video

@LonnieJohnson1

Ай бұрын

I would clean the carb. Now days when I know I'm not going to be riding for a while I shut the fuel off and run the fuel from the carb.

Hi very very nice video Do you know how get those camouflage plastic for my one

@LonnieJohnson1

Жыл бұрын

Thanks, I have looked and it seems to be no longer available. However, you can google it and lots of option and choices show up.

Do you know if the carburetor on a 2006 and 2007 are the same

@LonnieJohnson1

3 жыл бұрын

Not sure but they could be or probably real close.

Have ever rejected for altitude? I cannot find the jets anywhere for this carb

@LonnieJohnson1

3 жыл бұрын

Go to this link. www.ronniesmailorder.com/oemparts/a/yam/5003937bf870021f60a0e005/carburetor

I have the same and I find 2 houses hanging. Where they came from???

@LonnieJohnson1

Жыл бұрын

Look towards the front cylinder

@LonnieJohnson1

Жыл бұрын

Front or back?

How’s you clean that little jet

@LonnieJohnson1

3 жыл бұрын

I used tag wire or torch wire.

@bretttimothy9212

11 ай бұрын

Take the coating off a bread bag twist tie then use the wire inside that's what I use

Whew these carbs are a bit pricey if you don't with a chinese clone! My 07 is good now, but I'll save this video when the day comes to clean her out!

@LonnieJohnson1

2 жыл бұрын

OEM carburetor are not cheap for this quad. I don't want to have to buy one for sure.

Does this work for the 400 also? I have the Excact same atv but uts a 400

@LonnieJohnson1

3 жыл бұрын

It should

@jerardorojas7164

3 жыл бұрын

@@LonnieJohnson1 thanks. I just bought a 400 that was sitting for over 5 yrs. Where should i start to get it up to date on maintenance?

@LonnieJohnson1

3 жыл бұрын

Check the oil and then spray gas in the carburetor to see if it will start. If it starts then you know it will run. Once you get it running good change your fluids, spark plug and check your brakes to see if they need replaced. Nothing worse than not having brakes. Also check your gear oil in the differential.

@jerardorojas7164

3 жыл бұрын

@@LonnieJohnson1 my brakes are stuck. How do i release them so i can free the wheels?

Having major problems just getting the seat off now

@LonnieJohnson1

2 жыл бұрын

The latch is in a tight area.

@dionbennett2683

2 жыл бұрын

@@LonnieJohnson1 since I flipped it once it even more difficult

@LonnieJohnson1

2 жыл бұрын

Is the rack in the way?