2007 Mercedes Benz ML63 AMG Tailgate (Trunk) Pump Replacement ( Resolving Issues )

Автокөліктер мен көлік құралдары

This is a ML63 AMG . not a GL lol . Sorry for that mistake .

Пікірлер: 15

  • @welsh-sub-zero6658
    @welsh-sub-zero66582 жыл бұрын

    There’s a tailgate height limiter in settings on dashboard

  • @theshoptopauto

    @theshoptopauto

    2 жыл бұрын

    Haven't seen that before. I replaced the tailgate struts and it fixed the issue

  • @rsjyss
    @rsjyss4 ай бұрын

    Thanks for the detail video. What size bango bolts and washers? And where did you get them? Home Depot or the dealership? Thanks

  • @evanhale4845
    @evanhale48453 жыл бұрын

    You should be able to set it's stop height by holding down the red button I'm pretty sure

  • @theshoptopauto

    @theshoptopauto

    3 жыл бұрын

    No the struts were weak . I replaced them and it went all the way up. I appreciate the info though 💪💪

  • @zorikkhaimov7349
    @zorikkhaimov73495 ай бұрын

    where can i buy fluid for the tailgate pump? I would appreciate it. and what is the name of the that fluid

  • @ChrisLifts710

    @ChrisLifts710

    5 ай бұрын

    Regular hydraulic lift gate fluid will work

  • @johnbautista219
    @johnbautista2192 жыл бұрын

    Can you give a website where you got the pump and where u got the computer

  • @theshoptopauto

    @theshoptopauto

    2 жыл бұрын

    I ordered the pump directly from Mercedes benz dealership. Cost about $450-$500 . If your looking to fix the issue temporarily you can order a cheap Chinese pump from eBay or check on Google. Might last forever with a China pump who knows . If your talking about the module, it's the same one that was in the suv. All I did was clean the terminal pins and connector . I used a liquid called Deoxit . It's a cleaner and protector for electrics .

  • @johnbautista219

    @johnbautista219

    2 жыл бұрын

    I will buy the module from eBay but I want to know if I can still use the same module, I had my cooler on the back and it had a leak and I was wondering if I buy the new China pump and use the same module would it work 👀

  • @BlackhawkPilot
    @BlackhawkPilot Жыл бұрын

    So much rust on the pump. Indicates a water leak that also needs to be addressed. I would also use dielectric grease on the connectors after cleaning to prevent further corrosion.

  • @theshoptopauto

    @theshoptopauto

    Жыл бұрын

    Water leak was fixed, reason it's not wet. The stuff I used is good enough. 👍🏻

  • @targa6sp993
    @targa6sp993 Жыл бұрын

    Im have same problems Replace new one go hafl way i try . Turn air out work and open one time and stuck hafl way again

  • @user-lt2vh1yi3f
    @user-lt2vh1yi3f7 ай бұрын

    Looking for signal relay

  • @hingtong5110
    @hingtong5110 Жыл бұрын

    Not enough light, the parts you're working on were all in the dark and black background.

Келесі