Thank you so much. Even the auto shops couldn't find the right part number.

thanks for taking the time to post this. great job.

Thanks buddy, replaced my cars' one with ur help

From the U.K. thank you Sir

Thanks for your video, I could prepare to change mine as well. It is recommended to prepare with disc grinder, in case you have so rusty and fixed screws I had. I had to cut down the top of the screws to be able to remove the old stabilizers.

Thank you bud. Very helpful!

Thanks ! Very helpful 🙏🏽

Thankyou for your detailed instructions. Ur a genius to b able to explain stuff like that to a dummy like me!!!

Thank you so much dude 😊

Just a heads up guys, a 2007 USA Focus is NOT the same as a 2007 UK mk2 focus. USA didnt update to mk2 suspension for a couple more years. MK2s have different end links

@imjeffvaderofficial

4 жыл бұрын

Not only that; this is essentially an Mk1 facelift European Focus with a new badge.

@ciarancallaghan8166

Жыл бұрын

Thanks fellas

Gracias capo, me re sirvió.

Very helpfull could of just saved me a fortune 😁👍

Hi would you know if rear sway bars are torsion bars my car failed test on coil spring/torsion bar cut/broken but I can't see anything obvious,,any advice be much appreciated

I bought Volvo dealer OEM.. they were of plastic and not rubber as i have seen in other videos. Really expensive. 110 euro for two! Looks really easy to replace. Mine is missing the bottom part on the left side. Looks like bolt head vanished :) so swaybar is inactive/disabled for now with lots of banging and clonking :) No need to jack up the car or the tires? Swaybar not loaded?

Will this video apply to a 2009 Ford Focus as well?

Ok 👍👌. Brasil 🇧🇷

you can raise the control arm a bit more if need space. and there will be enough space to put the top bushing to tighten down. I didn't need to hold the top nut to tighten it.

Thanks for the video A ratchet and socket on bottom would be easier

those old ones look like new to what I got to take off I need to hack saw mine off somehow.

In The Uk Manual They Say To Torque Up To 11 Pounds

I got 2007 focus mine don’t look like that

Do you have to use axle stands?

@BT-lm4fd

4 жыл бұрын

If you're getting under a car axle stands should ALWAYS be used 👍🏻

@sweetvuvuzela4634

4 жыл бұрын

For sure better safe then dead

How did you know it had to be replaced?

@tariqtaj9133

3 жыл бұрын

You would normally hear a clunking noise every time you go over a pothole

@szymongorczynski7621

3 жыл бұрын

@@tariqtaj9133 And sometimes you'll even see that the bottom part has snapped off.

Silicon grease on bolt as it's between bushings; keep it from squeaking.

@zgabeartzaiftodie8615

3 жыл бұрын

Copper grease is better

I wouldn't have needed the elevator you used if you hadn't tightened the link on the other side.😅

On the 2008 model focus,they don't have them. Just FYI

Weird that my focus is a 2005 and it’s a newer shape then this one

@pdtech4524

2 жыл бұрын

Yeah mine is 2006 and a mk2, I guess this one must have been a late registered mk1 sat in a showroom for a while?⚠️👍

@matenagypal7322

Жыл бұрын

USA pal, Europe, UK and Australia got the mk1 up until late 2005, your 2005 must be a eraly mk2

Why don't you go buy a 16mm?

@davidmcdougall7645

5 жыл бұрын

When they break or when you hear nose from the rear end