My 2011 Ford Edge is working again after having flashed “LOW Engine Oil Pressure”, showing check engine light, lost power steering, then completely shut off. It looks like this video accurately identified the problem, though I was able to accomplish the task more easily by accessing the pressure sensor from beneath the car. This required an extension on the wrench in addition to the universal elbow. The powerful light I purchased was also helpful to see by. After starting the vehicle and having it die once more, I tightened the new sensor to ensure its proper sitting and reset the system by detaching the negative (black) terminal on the battery, waiting a while, and reconnecting it before hopping back in and starting it again (always start and end with black; do not touch both end at same time). At this point it has remained running for a promising amount of time and I thank God that I came across this resource and broke down a mile away from an AutoZone.

@diydevin

11 ай бұрын

I am happy to hear that you got it running again! Thank you for your feedback!

@theweatherguy9837

7 ай бұрын

Hello I have the same problem my Ford Edge 2013 goes off and it’s shows Low engine oil pressure I’ve replaced the sensor I’m still having the issue please help thanks

@AustinPrincewill

6 ай бұрын

My 2011 Ford Edge is having the same issues . Can you write a step by step process on how you fixed it please?

@AustinPrincewill

6 ай бұрын

⁠@@theweatherguy9837Hello, have you finally fixed it ?

The sensor requires 21mm deep socket. We measured the sensor with calipers and indeed it is 21mm. A 6 point 22mm would probably catch it but a 12 point 22mm will not. DeVin probably used a 6 point 22mm. Good luck.

@diydevin

6 ай бұрын

Yes depending on your vehicle it might be a slightly different size.

Good video I appreciate you doing it. Getting the electrical connector off the old sensor was tough doing it blind but I was surprised that it eventually came off no problem. Also getting the right combination of sockets and extensions to work took me a while. After getting the old sensor out a fair amount of oil dripped on the ground so I thought I should make sure to put the new sensor in good and tight. Definitely went beyond just snugging it so hope I didn’t crack the case. No oil leaking from the case so far. Thanks again.

@diydevin

5 ай бұрын

Glad to hear, if it ever does leak in the future some high heat teflon tape will help keep it in there snug without breaking anything.

great video very helpful Job done in about 15 minutes Thanks for the information

@diydevin

11 ай бұрын

Awesome, I am glad it helped!

Thx man super helpful

@diydevin

Жыл бұрын

Anytime, we love helping others out

thanks a lot very informational

@diydevin

3 ай бұрын

Glad it was helpful! Thank you for the positive feedback.

Thanks for sharing 😊

@diydevin

7 ай бұрын

I appreciate the positive feedback!

Awesome

Thanks! This helped, hopefully that pesky message stays away! It has so far. 🤞🏻

@diydevin

5 ай бұрын

Awesome, glad it helped!

I had to use a 21 mm for my 2013. Not a 22mm.

@diydevin

11 ай бұрын

Thank you for your feedback!

Did you say hand tightened the oil pressure sensor shouldn't you tighten it backup with the socket wrench?

@diydevin

Жыл бұрын

Yes tighten it with the socket but only snug it, don't over tighten it or it will crack the engine case.

Is it the oil pressure sensor? That you replaced.

@davidbloomberg9494

Жыл бұрын

Yes

@diydevin

Жыл бұрын

Yes it is.

Do you the PN of the sensor?

@diydevin

Жыл бұрын

I do not, it might be different depending on year, the process is the same though. Any auto parts store should be able to get you the right one.

What symptoms did your car have at the time of 'low engine oil pressure"?

@diydevin

7 ай бұрын

If the sensor is bad you won’t have any symptoms the car will drive normal since you don’t actually have low oil pressure. If you’re experiencing other symptoms then there might be another underlying issue.

@stephm3170

7 күн бұрын

@@diydevinmy 2009 ford fusion is saying low pressure and no start no click nothing all battery items are fine. Please any advice?

@diydevin

3 күн бұрын

@@stephm3170 I am not familiar with that car personally, but it’s likely a bigger issue if nothing is happening.

Anyone try replacing it from underneath?

@diydevin

2 ай бұрын

I personally did and it would work but it was way harder to see what you were doing. If you had a camera so you could see what you were doing; then doing it from underneath would possibly be easier.

@540twisted

2 ай бұрын

@@diydevin okay thanks Dev

Just a thought, because your method looks much better than others on YT..... Saying what you did AFTER you did it is really a huge letdown for those of us who might follow your guidance.... How you snake the ratchet & deep socket over the sensor, for example, is pretty important to the repair process.... Same with disconnecting the upper O2 sensor that you mentioned.... Side note, the other vixeos on this topic refer to a 21mm deep socket, you said you used a 22mm socket.... Thank you for your sharing this.... I have a new sensor on order tho usps has it delayed up north.....

@diydevin

Жыл бұрын

Most of my videos are more detailed and show everything I do, I had to quickly get this done so my wife could have her car back. I personally used a 22mm so it might be a different size depending on if the sensor is aftermarket or not.

I get this error most times when driving

@danielanokam

Жыл бұрын

And the car shuts off immediately it shows

@diydevin

Жыл бұрын

If you have replaced the sensor and you are still getting an error then there might be another issue going on.

@dammamfoodie5278

Жыл бұрын

@@diydevin Same with me, i have tried replacing the oil pressure sensor twice in one year and still the same issue. "LOW OIL PRESSURE" light and the engine starts shutting off while driving.

@AustinPrincewill

6 ай бұрын

@@dammamfoodie5278have you resolved this issue ?? Because I need help asap honestly please reply back it will be of great help thanks!!

@danielanokam

6 ай бұрын

Did u fix yours

I've replaced this and mine is coming on only at idle. any suggestions? how can i check the oil pressure? I replaced the radiator fans too and it helped for a month or so. then started again and it's worse now. every red light it comes on.

@diydevin

11 ай бұрын

Some auto parts stores will check your oil pressure for free. Or if you have a scan tool with live data it can check as well.

Liar!! You can’t remove the shield without unplugging the cord? 😢

@diydevin

2 ай бұрын

We are sorry you feel that way. I’m going to quote from the video “make sure you unplug that sensor” at 2:09