Thanks for the video, I think I need to change my motor mount also. By the way, what brand of floor jack are you using. I bought one but couldn't get it under the frame.

@TechnMoto

4 жыл бұрын

Brian Wanberg it’s the harbor freight aluminum jack

@HaiPham-dw2kg

3 жыл бұрын

get a low profile jack, it will fit.

@bikersoncall

3 жыл бұрын

MIDROLL ADDS = DISLIKE. I let all adds run , but midrolls are so disruptive and loud, I never let them run, if I can catch them, nor watch them, even if my mother would put up a video with them , it would get 'dislike' .

@Old940

Жыл бұрын

Just ride upon a short 2x6 and your jack should work. Or get a motorcycle jack that is good for removing the wheels.

Finally someone shows the top and bottom of the mount along with the install. Difficult area to film. You did it brilliantly!

@TechnMoto

3 ай бұрын

Wow. Cool. Thanks.

Beautiful color. I also liked how you just muscled the engine up with the bar. Most vids show jack. Very enjoyable! Nice job.

@TechnMoto

9 ай бұрын

Thank you very much!

GREAT video! Short and sweet brother! Perfect!

@TechnMoto

2 жыл бұрын

Hey thanks for the comment. I appreciate that. 👍

So glad I came across this today ... did a 3 hole change fired the bike up and noticed alot of shaking on the front looked at the bushing and it was dry rotted and my first thought was how to change it.... now I know thanks

@TechnMoto

Жыл бұрын

Glad it was helpful. Take care and thanks for watching and commenting.

Good job brother 👍🏼, stay safe 😷💯

@TechnMoto

4 жыл бұрын

thanks bro

Nice little service video. You're the first guy I've seen doing a tech video on replacing engine mounts, well done Mikey. I see your got the same fuel crossover line as me, I haven't put mine on yet though, hi to Chewy & family. I was due to fly to.Prague last Sun for replacement lens surgery on my eye( it's a third of the price over there compared to the UK) but the Czech government closed their borders due to the coronovirus, it's getting worse over here, stay safe all of you & all the best 👍

@TechnMoto

4 жыл бұрын

Thanks and take care of yourself. This virus is not traveling fast over here so far, but we’re all quarantined. No school no work no travel no doctor appointments except for the wife and I. We still have to work being in public safety sector. Hoping this passes quickly would like to do the trip into Canada Nova Scotia this June Any how be safe and god bless my friend

@geoffozevans4500

4 жыл бұрын

@@TechnMoto take care Amigo

Thank you for your message at the end of the video. We motorcyclist smell a lot more people smoking weed in their car while driving than most other drivers notice. That's been my observation since it was legalized here in CA.

@TechnMoto

Жыл бұрын

I have an issue when folks put innocent folks at risk. Anyhow take care and ride safe.

Thank you!

@TechnMoto

11 ай бұрын

You're welcome!

Thanks brotherman...

@TechnMoto

3 жыл бұрын

Thanks for commenting and watching. Big 👍

Great video - especially the commentary at the end. Which replacement mount did you go with? I got one from J&P and it's just as bad as what I removed.

@TechnMoto

3 жыл бұрын

I usually get my parts from JP Cycle too. I ordered and installed the jp cycle brand motor mount. Seems to be holding up well so far. Maybe you receive a defective one? Just a thought.

Thanks for the great vid, just bought 06 RK with 18k miles some problem but worse hope this fixes it, or im goin back to a gold wing.

@TechnMoto

2 жыл бұрын

Lol definitely not the same as a goldwing. Good luck with the repair.

@66thru68veteran

2 жыл бұрын

@@TechnMoto Turned out to be a plugged air cleaner making it backfire. New air cleaner and new spark plugs made it run much smoother . Now imma do that front mount, Thanks again.

@TechnMoto

2 жыл бұрын

Cool. Glad you got it sorted out. 👍

Very nise ☺️👍👍👍

@TechnMoto

4 жыл бұрын

Thanks

i did the same thing to my 2007 electra glide. 👍👍

@TechnMoto

3 жыл бұрын

cool pretty easy aye

best vid on this yet

@TechnMoto

3 жыл бұрын

Wow thanks for the comment 👍

Great video.... However, it's a shame replacement of the front mount didn't reduced the vibrations on mine RC 08. and I fitted original HD mount. Anyone knows what else I can do to fix it ?

@TechnMoto

Жыл бұрын

Hmmm what about the rear bushings? just a thought

hey Techn nice video i got to change mine also what brand of motor mount did you buy and how much was it. thanks.

@TechnMoto

3 ай бұрын

Wow that was a long time ago. I remember ordering it from jp cycles. Can’t remember anything else, sorry.

Chicks love the vibbbeeeerrrrrations so I went straight solid mount. Got um all wanting a ride.... That's my tip of the day, you're welcome.

@TechnMoto

10 ай бұрын

lol.Great tip. Ride safe

Any chance you remember the torque you used on the 3 motor mount bolts?

@TechnMoto

Жыл бұрын

approx. 22 ft lbs and 33 ft lbs on the mounting plate bolts I believe. You should get yourself a manual for your model motorcycle so you can verify specs cause specs are different depending on models

That's right! "Like this!"!!

@TechnMoto

20 күн бұрын

@@markscheidlmeier6523 🙂

Should the Bike be on stand when starting with Bolts loose so it finds it right sweet spot or on the ground?

@TechnMoto

Жыл бұрын

sure

How about the adjustment on the stabilizer bar?

@TechnMoto

2 жыл бұрын

I did not mess with the stabilizer adjustment

I have same issue and i noticed that it was even worse engine braking going slow

@TechnMoto

2 жыл бұрын

👍

00:10 6:35 Yeah, I would say pretty big difference..ordering parts..:)

@TechnMoto

3 жыл бұрын

Ya made a world of difference on the road

My new one fixed the engine shake at idle, but now it shakes like crazy between 1600 and 2000 rpm. Especially when coming to a stop.

@TechnMoto

Ай бұрын

Hmmm. Wonder if you have a bad spark plug wire or spark plug? Just a thought.

@maxxbenzz7842

Ай бұрын

@TechnMoto it's gotta be something with the front or rear mounts. Bike runs great above 2k rpms. We'll the bike runs great below 2k too, just a shake through the fairing when slowing down between 1500 and 2k.

@TechnMoto

Ай бұрын

What about the rear trani mounts. Just throwing stuff out there.

You might put in the description what year this is, it matters, mine's a 2009 FLHTCU.

@TechnMoto

3 жыл бұрын

Done

@bikersoncall

3 жыл бұрын

@@TechnMoto Thanks man, mine takes two pads since its a 09 I've come to find out, same basic process, with some minor differences, I wish I had the old style, they keep making things more difficult to deal with, but they call it progress, . shrugs... ha ha.

Install new lock washers, clean all parts and bolts, use parts manual to insure all parts and hardware are correctly installed, used service manual for torque specs. Might suggest you use new locking nuts, or Lock Tight, I like new new hardware when available.

@TechnMoto

Жыл бұрын

Thanks for the tips! Makes sense.

Do ya think maybe you should have let it run without the jack under it?

@TechnMoto

2 жыл бұрын

Not sure. It all worked out in the end.

Do yourself a favor and check out kinetic structures outta AZ

@TechnMoto

Жыл бұрын

👍

Yeah, that's the rectifier, aka regulator.

@TechnMoto

3 жыл бұрын

👍

What would happen if you replaced it upside down?

@TechnMoto

Жыл бұрын

Lol don’t know never tried that

@maxxbenzz7842

Жыл бұрын

@@TechnMoto the reason I say that is there is a video on here where the guy was showing the 08 and newer type mounts and they looked different. There were no directions so he was a but confused. I'll try and find that video

@TechnMoto

Жыл бұрын

@@maxxbenzz7842 my guess probably not much would happen. Usually they are marked.

So that’s what a rubber mount is.. now I know haha

@TechnMoto

3 жыл бұрын

ok

You put your new mount in upside down

@TechnMoto

11 ай бұрын

Then it seems it works just fine either way. Thanks, appreciate the info.