so the valve cover gasket went bad on this 2004 2006 sienna 3.3
Жүктеу.....
Пікірлер: 28
@femensah Жыл бұрын
Honestly it's annoying the parts to clear outta way before getting to work on this area of engine either, plugs, ignition coil, valve seal/covers.
@aarongrissom43266 ай бұрын
Great video. Very detailed. Thank you.
@JM-AUTO
6 ай бұрын
Glad you enjoyed it! thank you.
@adriangale Жыл бұрын
Thank you. Very helpful!!
@JM-AUTO
Жыл бұрын
thank you.
@guatemalaesincreible Жыл бұрын
Buen video gracias
@JM-AUTO
Жыл бұрын
ola gracias Amigo y saludos.
@adriangale Жыл бұрын
Do you feel it’s ok to leave off that back manifold to block bracket? I’m doing my spark plugs and discovered I needed to do the gaskets too. I did manage to get all three manifold bracket bolts out but I was concerned how I would get them back in.
@JM-AUTO
Жыл бұрын
You can leave one or 2 the ones close to the throttle body or leave just one. The one by the throttle body, most of the siennas I have worked on I have found them with nothing the people don't put them back, my sienna has nothing either so I was happy when I replaced spark plugs.
@johnscreekmark Жыл бұрын
I really like the performance of the 3.3 V6 Toyota…but getting to the backside coils and plugs is a real bear!!
@JM-AUTO
Жыл бұрын
I totally agree with you, the rear ones are not that easy. thanks for sharing your thoughts.
@noble5wins Жыл бұрын
what are those small hoses that are connected to the vent next to the battery or connected to air filter housing...???
@JM-AUTO
Жыл бұрын
they are vacuum hoses and for the eva system.
@noble5wins
Жыл бұрын
@@JM-AUTO the ones that are ob my sienna are broken off . so . . .
@artillery0811 Жыл бұрын
At 12:18, what is that sensor you had removed? Any chance you know what is that part or part #?
@JM-AUTO
Жыл бұрын
I think you mean the ground that has a connector, I had to remove it because I needed to pull up the big wire harness.
@DannyMerida7 Жыл бұрын
I can not find the part 2 of the video
@JM-AUTO
Жыл бұрын
hi, this is the link for part 2 if you still want to see it and thanks for visiting my channel. kzread.info/dash/bejne/q61r2byde7fcl9I.html
@YupyPerez-qg9vc Жыл бұрын
Este man si sabe
@JM-AUTO
Жыл бұрын
gracias Amigo por su tiempo en este su canal deberas se aprecia muchicimo.
@Pepeauto Жыл бұрын
Do you know where to get the covers at Amazon?
@JM-AUTO
Жыл бұрын
when you go to any of these webbsites like amazon or ebay all you do is type the component you looking for and vehicle info and you should be able to find it there. i appreciate you visiting this channel.
@ask43242flight Жыл бұрын
May you share the year of this car?
@JM-AUTO
Жыл бұрын
yes and I apologize for not proving the year of the sienna. 2004 2006 sienna 3.3 and thanks for coming to my channel.
@johnyduenas Жыл бұрын
Cuanto cobra por este trabajo?
@JM-AUTO
Жыл бұрын
ola Amigo y gracias por visitar my cannal, el trabajo puede andar por los $200, tambien depende del area donde este.
@guatemalaesincreible
Жыл бұрын
En que estado esta mi amigo
@andybarrales60182 ай бұрын
No sacaste nada no enseñaste nada porfavor puedes volver a good nseñar todo porfa
Пікірлер: 28
Honestly it's annoying the parts to clear outta way before getting to work on this area of engine either, plugs, ignition coil, valve seal/covers.
Great video. Very detailed. Thank you.
@JM-AUTO
6 ай бұрын
Glad you enjoyed it! thank you.
Thank you. Very helpful!!
@JM-AUTO
Жыл бұрын
thank you.
Buen video gracias
@JM-AUTO
Жыл бұрын
ola gracias Amigo y saludos.
Do you feel it’s ok to leave off that back manifold to block bracket? I’m doing my spark plugs and discovered I needed to do the gaskets too. I did manage to get all three manifold bracket bolts out but I was concerned how I would get them back in.
@JM-AUTO
Жыл бұрын
You can leave one or 2 the ones close to the throttle body or leave just one. The one by the throttle body, most of the siennas I have worked on I have found them with nothing the people don't put them back, my sienna has nothing either so I was happy when I replaced spark plugs.
I really like the performance of the 3.3 V6 Toyota…but getting to the backside coils and plugs is a real bear!!
@JM-AUTO
Жыл бұрын
I totally agree with you, the rear ones are not that easy. thanks for sharing your thoughts.
what are those small hoses that are connected to the vent next to the battery or connected to air filter housing...???
@JM-AUTO
Жыл бұрын
they are vacuum hoses and for the eva system.
@noble5wins
Жыл бұрын
@@JM-AUTO the ones that are ob my sienna are broken off . so . . .
At 12:18, what is that sensor you had removed? Any chance you know what is that part or part #?
@JM-AUTO
Жыл бұрын
I think you mean the ground that has a connector, I had to remove it because I needed to pull up the big wire harness.
I can not find the part 2 of the video
@JM-AUTO
Жыл бұрын
hi, this is the link for part 2 if you still want to see it and thanks for visiting my channel. kzread.info/dash/bejne/q61r2byde7fcl9I.html
Este man si sabe
@JM-AUTO
Жыл бұрын
gracias Amigo por su tiempo en este su canal deberas se aprecia muchicimo.
Do you know where to get the covers at Amazon?
@JM-AUTO
Жыл бұрын
when you go to any of these webbsites like amazon or ebay all you do is type the component you looking for and vehicle info and you should be able to find it there. i appreciate you visiting this channel.
May you share the year of this car?
@JM-AUTO
Жыл бұрын
yes and I apologize for not proving the year of the sienna. 2004 2006 sienna 3.3 and thanks for coming to my channel.
Cuanto cobra por este trabajo?
@JM-AUTO
Жыл бұрын
ola Amigo y gracias por visitar my cannal, el trabajo puede andar por los $200, tambien depende del area donde este.
@guatemalaesincreible
Жыл бұрын
En que estado esta mi amigo
No sacaste nada no enseñaste nada porfavor puedes volver a good nseñar todo porfa