2001 Integra GSR Gets Upgraded (Commentary)
Автокөліктер мен көлік құралдары
I’m trying something new with this video by doing a commentary to provide more detail on the work that was done to this car.
Link to original video: • 2001 Integra GSR Gets ...
Thank you for watching!
#ETCG1Video #ETCGShop
Check out Honda Pro Jason: / @hondaprojason
Subscribe to my other channel EricTheCarGuy: kzread.info...
Become a Premium Member of EricTheCarGuy.com: www.ericthecarguy.com/why-bec...
My Patreon Account: / ericthecarguy
The best place for answers to your automotive questions: www.ericthecarguy.com
EricTheCarGuy FAQ Page: www.ericthecarguy.com/faq/
Work done in this video
New clutch, limited slip differential, new clutch hydraulics, JDI push button start, JDI main relay conversion with kill switch, timing belt and water pump with drive belts, cam seals, crank seal, rear main seal, oil pan gasket, VTEC gasket, distributor ‘o’ ring, thermostat and gasket, valve adjustment, plugs, wires, distributor cap and rotor, valve cover recondition with new seals and grommets, Type R lower air box conversion for cold air intake, Skunk2 Alpha header and Tanabe Medallion exhaust swapped from my ITR, Progress rear stabilizer bar and brace, left outer CV boot, new tail light gaskets, and tire rotation.
Parts (some links are affiliate)
VHT Header Paint: amzn.to/40QaViS
JDI Push Button Start: www.jordandistributors.com/co...
JDI Main Relay Upgrade and Kill Switch: www.jordandistributors.com/co...
Clutch (Exedy): www.partsgeek.com/ss/?ssq=200...
Limited Slip: jhpusa.com/products/mfactory-...
Rear Stabilizer Bar: www.progressauto.com/product/...
Skunk2 Alpha Header: skunk2.com/412-05-1902.html
Revel Medallion cat back exhaust: throtl.com/products/revel-med...
Gaskets, belts, tune up parts, and seals were Honda parts.
Related Videos
ITR vs GSR: • Integra Type R vs Inte...
ETCG Gets a 2001 Integra GSR: • ETCG Gets a 2001 Integ...
2001 Integra GSR Muffler Replacement: • 2001 Acura Integra GSR...
Radiator Replacement 2001 Integra GSR: • 2001 Acura/Honda GSR R...
Honda B18C1 Valve Adjustment: • How To Adjust Valves H...
ETCGHackHawk Playlist: • 2003 Honda Pilot Inspe...
Type R Playlist: • EricTheCarGuy Gets an ...
Dads Truck Series: • #ETCGDadsTruck Build I...
The Fairmont Project: • ETCG Gets a New Car! -...
**Answers to your automotive questions found here: www.ericthecarguy.com/faq
Social Network Links
Facebook: EricTheCarGu...
Twitter: / ericthecarguy
Instagram: / ericthecarguy
Wanna see more stuff like this from ETCG? Information on Premium Membership: www.ericthecarguy.com/premium...
Stay Dirty
ETCG1
Пікірлер: 161
Enjoyed the commentary/play by play format. Thankful to have Eric back in any capacity.
@stco2426
Жыл бұрын
Yo
Ah, and we have come full circle with poor Eric crawling around on the ground again! Thanks for the content, love to see you back!!
For a long time, I've felt like the best content is made by narrating over a time lapse. Now this won't work for ALL your videos. I found your channel interesting because you were good at solving pesky problems that others couldn't solve... saving us some money by explaining what is "good enough" and what really isn't and why. So I hope you do narrate some more videos... but don't lose that style... the stuff you've done for so long that really made your videos stand out. Thanks Mr. Car Guy... I'm glad you are getting back into the swing of things.
@ETCG1
Жыл бұрын
Thank you for the feedback. It's helpful
@teaganroehl
Жыл бұрын
I miss camera man Brian days 😅
@glenniz1
Жыл бұрын
Been watching and enjoying your channel since day 1 Eric! It's good to see you taking time now to simply enjoy life, and most of all, share the knowledge of Honda Performance with your son! My first experience with Honda dates back to 1973, when the Honda Elsinore 250 was introduced, I was racing motocross at the time, and WOW!....Did Honda open the eyes of everyone involved with all motorsports, not just motocross! Soon after, my girlfriend at the time, purchased a Used Honda CVCC, and not too long after, Oscar Jackson developed his now infamous Jackson Racing Supercharger. At the time, I was now out of MX, and heavily involved with the Performance VW Scene, and drag racing bugs. By the mid 80,s, Street Racing was happening all over SoCal, and the Tuner Craze was starting to really catch on. Before long Hondas were killin' everything in sight, and this led to the Craze that truly lasted for the next twenty five years or so. Since about 2005 or so, Honda seemed to have, not so much lost their way with performance oriented vehicles, but rather, tried to distance themselves from the Criminal Street Racing Tuner Crowd, that the Fast and Furious movies had made Honda owners, look like in the eye's of the public. It was a true awakening to the automotive world, and probably scared the sheet out of Ferrari, Porsche, Lamborghini and all of the other high priced SuperCar manufacturers of the day, to see what a Japanese company could bring to the table, for such an incredible price! Sadly, those days are gone forever, but by passing along our knowledge to the next generation, the memories of those days can live on forever! Thank You for being one of a small group, who is passing their wealth of knowledge, unto the next generation of Car Guys Eric!!👍🏁
Man, I love what you’re doing to these integras because they deserve it. I know this is going to sound cliche but they really don’t make them like this anymore. Love the new format too, glad you’re back with new content. I know you miss the shop with the lifts though especially on work like this.
A detailed video of splitting the case and inspecting the trans and installing the lsd would be an awesome video. Good video. Stay dirty Eric.
Hey man, don't lose hope. I appreciate all the time and effort you've put into your videos, and I've used so many of them to work on various vehicles. Keep it up, I will definitely keep watching. Adapt or change as you see fit as things have been changing for you. Keep it up ETCG!
So nice seeing you back in action Eric. Looking forward to more videos. Happy Easter 🐇
The problem with working on older cars is you notice issues that need to be fixed in the process of doing the original fix. FYI i am working on the ground all the time and i use what is called reflectix to keep my body comfortable, it helps my old bones and might help yours. From an older now shade tree mechanic . Your valve cover mod is looking sharp!
@Patrick94GSR
Жыл бұрын
This is why my repairs take weeks instead of days lol.
Bonding with your son working on cars is the best experience u will ever have I did it with my father and now I'm doing with my son ✌️
So nice to see such an icon of a car being taken care of like this, great work!!
Just got the 302 for my V-8 Ranger project home today. As soon as it's on the stand (tomorrow morning), I'll start cleaning it up and taking it apart to find out what I actually have. It came out of a 30 year old F-150 so, who knows what it really is? Even at 54 years old, I still love my projects and can't wait to really get into this one! The yard I got the engine from also has a bunch of 4x4 Rangers so, I'll be headed back there soon for an 8.8" rearend to replace the 7.5" under it now (original engine was a 2.3L).
There is a huge audience for integra diy vids. I hope you find a shop soon. We miss your detailed repair vids.
Great to see you back Eric. It reminds me of your earlier videos before you had your Bendpack 2-post lift when (like the rest of us) we have to jack up our vehicles, put down some cardboard and do everything from floor level! I am a few years your senior and I can also relate that after working on the car for a few days a nice long rest is much needed! My birthday was coming up a number of years ago when my wife wrote to you to see about visiting your shop in Cincinnati. However, you were not taking any more visitors. So instead, you kindly sent me an Eric the Car Guy T-shirt with the Fairmont project logo as a birthday present! I still wear it proudly every summer. Please keep up the great work as it's good to see you back at it again!
This was great. Very enlightening to hear your perspective on things instead of just seeing the time lapse. Would definitely love to see more of this. If you're not necessarily ready for the typical ETCG repair videos yet, I think this is a great substitute in the meantime.
I agree with y’all on having more Timelapse videos to include commentary; even regular videos with commentary
GLORIOUS!!! Great work, great creativity in adapting your approach to that cold air intake!!! A LOT of people are going to watch this and want to send you their cars!!!
11:12 The look of waiting. Lol Very nice work EC, a pleasure to hear from you again, making my KZread rounds back a bit early on automotive side of things. Yes, I have kids and I am all too familiar with this look. Lol golden!
Great to hear n see you back on here, that's a lucky young lad you have there, having a legend for a dad 👍
Notification squad Have a nice weekend!🔥🔥🔥 HAPPY EASTER!🐣🐣🐣
Really enjoyed the sit down commentary. Thanks for taking the time to do this!
Very nice! Keep doing fun stuff!
It is so good to be watching one of your videos again
Dad of the year... So glad he decided to keep the GSR.
It was fun. Thanks!
Great to see you back buddy, Great news.
Great to have you back on KZread!🎉 Happy Easter 🐰
Glad to see you back!!!
Great format! Thumbs up and thanks for posting.
5:58 I do that to 19+ inch Rims when I put them on, when jacking the car on the floor. I find it to makes threading Toyota lug nuts easier on 4runners/Highlander/Tacoma/Tundras with larger tires.
Good to see you are back on YT. Thank you Eric.
awesome video as always!
nice one Eric keep them vids coming
Commentary is great man. It's a different way to make videos. Works better for you in this new phase of your life. Cheers man 💪👍🍻🍻
nice work keep up the great content...
I didn't realize how much i missed Eric.
So happy to see you Eric Thank You !
Awesome video man Good stuff and I hope all is well
Thank you for posting!
Not sure if its just me but I totally missed your last video in my subscription feed.
More detail is ALWAYS welcome Eric. Thank you for sharing the additional information with us
Glad to see you back Eric!
Happy Easter, Eric. Glad to see a new video from you! 😁
Any content from you is good. How ever you want to is up to you. Just glad your putting out more content. ❤
Happy you are back. Take your time brother, I really missed your videos. Be well
MORE of these please. I've been missing your videos
Cool video Eric. I like this format of video.
Love the commentary Eric, keep it up
Great to have you back, Eric!
so good to see you, mang...
The commentary was nice. Thanks. 👍
It's so good to see you back, I really enjoy watching your videos.
Enjoyed the video 👍👍👍
This was an excellent video format, I think it would be great to see more like this!
Great video Eric , thanks so much for sharing , God Bless .
Great quality workmanship!
Great video Eric. Lov the format. Doing anything on your type r is always of interest. So thanks for sharing ✌️ Peace from Melbourne Australia.
You are a great story teller, would love to hear more like this.
Awesome vid x's 2!!! 🙏🙏🙏🔥🔥🔥
Awesome job Eric 🔥🔥🔥
Thx you Eric. I appreciate you. Glad you’re back. Luv the Fairmont. Keep up the good work.
now this is what i'm talkin about great video what i mean by that is you sound way less formal and way less stressed , i noticed some in your last vid but this one way better oh slow the speed down just a little and don't timelapse to much i've heard of people getting motion sick from it but i don't know anything so don't take my word for all this sept great vid eric the car man
Awesome as always buddy! TCB, Marty D
Great commentary ❤
Thank you Eric love watching your videos miss watching thank you watching from South Africa
Man it's good to see you again eric, I've been following you since the old shop the one you were at when it all started. Good to see you wrenching. I'm getting ready to change out the water pump and timing belt on my 09 dodge journey 3.5 V6.
Good to see you the OG
Great to see you back again even if it's just your home projects
Good Job & A Great Dad ! Way to go Eric.........
Great video
I painted my car in another town an hour away (on a good day) I definitely can relate to the nuisance of travelling to get work done. Also... quite expensive these days.
Leg day in the garage gym.
Great video. Really look forward to the videos on the GSR. I have a 2001 GSR with over 370K miles. it's still running fine. I have used your videos more than once for repairs. I will keep it til the wheels fall off or I can't get parts.
Also super glad that he decided to keep the gsr vs sell it and go a different direction. Cars like the gsr just don't exist anymore.
Heck yeah sounds good man thanks for the update your son's going to be a ripper, welcome back and remember when life slings A-Rod just LS swap it and Keep On Truckin haha have a good one
Love this content
Two cracking cars, I think I can sense a Father V Son race of some description, in the near future😁
Yes, it was fun and always welcome more.
I’ve done most of the same work on my GSR, at the same time, and ended up just pulling the whole drivetrain out. You’re already removing both main engine mounts, have the exhaust, shift linkage and radiator out. Might as well just unplug a few more things and pull the engine. I did timing belt, clutch flywheel and crank seals, and oil pan seal all at the same time. So much easier with the engine out. Also I’ve had problems with both OEM and FelPro PermaDry oil pan seals. I plan on trying a MyHondaHabit oil pan seal next time.
Do more of these please!
Best channel on KZread!
Awesome! And good to see you on here again. You know... you wouldn't have all these tool issues if you took your tools home and put them in your home garage. You might even find yourself working 😮
That was pretty cool.
Great job evertime! I love the knowledge and teachs more every time. Should you have the option , I have and 2005 odyssey, and would like to know about engine brackets to replace. How to figure it out. Thanks
ETCG is definitely an epic channel for KZread
❤❤❤❤goood job❤❤❤
Would be very interesting to see the whole process!
I can imagine getting the trans out of an Integra is even more of a pain in the neck-or-other-anatomical-location than it is on an Accord. Most important thing I did (other than buying that Milwaukee impact :D ) was to make a drawing of the gearbox on a cardboard sheet, and poking each fastener thru the cardboard at the right location on the drawing. Then when I got the old trans all the way out, I put every fastener in the right hole. When the new transmission went in, I knew exactly where every fastener was and where it went. :D
U look rested, brother!
It is my Birthday 🎉 thanks Eric!
@ETCG1
Жыл бұрын
Happy Birthday!
I miss your videos. Big time.
Missed you man...
I would like to see an update on all your cars. Dad’s truck, faremont, elements
Hey Eric nice contents as usual. I have a 94 Acura Vigor. Getting oil in the plug. Does that car have lower spark plug tube seals like the honda video you did a while back? And if so is the part similar? Thanks
Had a Tanabe Racing Medallion on my first car which was a 1991 Integra LS. Currently have a Skunk2 on my 2015 Civic SI. Both are incredible sounding exhausts. Never had to do any welding. But I did have to cut off some head shield tabs because the Skunk2 has some pretty big piping and it would just rattle off those tabs. I should mention there's no heat shields where these tabs are, so they may not actually be called that.
Miss your videos dude.
Eric its awesome to see you and your son having similar interests. stay dirty.
More videos of your GSR please!
@ETCG1
Жыл бұрын
May be ITR next time. Thinking about doing a video of the LSD install.
Im subscribed to both channels but youtube deemed to not put the timelapse vid in my feed. just and FYI for you Eric.
I kind of prefer the narration to the music/time-lapse montages as in some of the previous videos. (Not that those are bad).
Son should upgrade his front rotors to Mini Coopers 11” and rear RSX base rear calipers with EP rotors