Merch ► teespring.com/stores/fixitnick My Amazon Garage ►amzn.to/2QlHZdO 🎥 My Video Recording tools • DJI Osmo Pocket ► amzn.to/2LUtOzr • Insta360 One X ► amzn.to/2Yy64T2 • Samsung 128GB Micro SD ► amzn.to/2YwT9AE • iPhone 8 Plus 256GB ►amzn.to/2LSvj16 FixitNick on Social: • Facebook ► facebook.com/fixitnick81 • Instagram ► instagram.com/fixitnick

A easy way to fix the boot slip is to clean everything with brake clean, then use some sandpaper on the inside of the clamp and outside of the boot to make it not smooth anymore.

Good stuff man! Its gonna look nice in there! Since you got that harness out you should go through and clean up the loom. I've always wanted to replace it with a nice braided loom and to tuck away the sensor wires not in use anymore. I think it would help it to look a lot cleaner than the factory plastic one with all the tape hanging off and what not. Also, some anti seize on the up pipe clamp is not a bad idea!

I like the way you called out that Chris Fix dude showing reality vs how to. Well done sir!

Watching you with that Miluakee Ratchet in nearly all your episodes has me pretty much sold on one myself. Seems incredibly useful and a major time saver!

@willrisher6049

Жыл бұрын

You definitely won’t regret it

I really have to say that I am so thankful for your videos I recently just did the turbo on my 01 F350 and if not for you, I would have been lost. I really do appreciate your videos.

Great Job Nick, got the leak sorted and using the window of opportunity to get the upgrades done. 👍🏻👍🏻👍🏻 Such a handy video for 7.3 owners everywhere.... Nice job with the video too buddy 😉

@FixItNick

4 жыл бұрын

Yes sir, sometimes gotta take those opportunities lol

Thanks for adding the “reality” piece, genuine and valuable. Appreciate your candor and style. 👍💪

@FixItNick

4 жыл бұрын

Lol glad you liked

@pete5108

2 жыл бұрын

I just did this same project plus up pipes and if Nick made that clamp disconnect look easy, I was gonna unsubscribe lol. Great job on the truck bro! Glad this new year is gonna have more 7.3 vids. Very helpful and fun to watch. Bonus that we get to see you're a family man and the kiddos help. There's a lot of us in the same boat. God bless you.

Great channel. Doing a bunch of the same mods to my 7.3. I watch most of youtube at 1.5x and I was really digging the music around 6:07 at 1.5x lol.

@FixItNick

4 жыл бұрын

Haha, sometimes you gotta do without enough time

Always great informative video content! Even though I have a 6.0, I still get a lot of great mod ideas.

@FixItNick

4 жыл бұрын

Thank you really appreciate it

The how to vids vs reality was hilarious! That's the truth right there. For the rear clamp I have found that putting a pry bar on the ears of the clamp and hitting it with a hammer breaks it off much easier.

@FixItNick

4 жыл бұрын

Thanks man, I should have sprayed it before running to work, but I think I gathered enough rage at work haha

I need to do the same things to my dad’s 99 F350. Thanks for the video 👍

@FixItNick

4 жыл бұрын

Thanks, I’ll see if it’s worth it shortly

Hey Nick. Thanks for another great video. Loved the "Reality check" and the pillow bench. I must have an old stinky pillow laying around here somewhere. Anyway, we are on the same page with mods but I'm a bit behind you. Harpoon/Hutch with remote fuel filter mod last week, shocks and exhaust this week. Pulled the bed to make all of it easier. Joe (LOW) has inspired me to rebuild the turbo, but I may wait for winter, a nice warm garage bench project. I hope you keep the 7.3 vids coming, at least until you're "done". Thanks much for your efforts. PS: I've found that removing the degas tank and hood latch make for a comfortable (with furniture pad) place to lay while working the rear of the engine bay.

@FixItNick

4 жыл бұрын

Haha thanks buddy, my list keeps growing as I do more LOL ... so you think bed is easier than dropping tank? I might actually do both to clean and spray frame hmmm, hutch and harpoon for sure and pick up filters delete

@richardmellem3583

4 жыл бұрын

@@FixItNick If it was the Hutch and Harpoon only I'd probably just drop the tank (my pick up filters were disgusting). But the exhaust, shocks, fuel filter, differential service, rust conversion and paint will all be so much easier with the bed off. Plus I'm gonna add a rear winch where the spare used to go. Pulling the bed was simple. I did it alone with a cheapo Harbor Freight chain hoist. One thing I'd say to all... resist going for the impact wrench for the bed bolts ( you need a T50 Plus torx head). Use a breaker bar instead. Way gentler. Let the penetrating oil soak a couple days. I got every one of my bolts out and they look good enough to reuse (I won't). 7.3 forever ! Too bad we Californians have to hide everything from the smog guys.

Coming along great brother @FixItNick

Another good vlog keep up the good work.love watching them

@FixItNick

4 жыл бұрын

Thank you really appreciate it

Sweet! Thx for the vid Nick

@FixItNick

4 жыл бұрын

You got it, thx for the watch

It look so hard the way you pull that turbskie out tho, but love it keep the good work👍👍👍

@FixItNick

4 жыл бұрын

It was triggered lol

Great video, thanks for the great instructions.

@FixItNick

4 жыл бұрын

Thanks 👍

it took me an hour to get my fuel bowl, downpipe clamp, intake spider, and intake off. and then another hour just for that damn up pipe clamp.... i loved that reality part, because I think it was thoroughbred diesel that made a tutorial on how to remove it and said it was difficult, but i didnt think it was going to be as difficult as it was.... the bottom ear on the clamp was such a pain in the ass.

@FixItNick

2 жыл бұрын

It does always look easier in vids haha

@RedEyedPumpkin

2 жыл бұрын

@@FixItNick getting everything back on too was a nightmare.. I put the new collector on before I put the turbo in and I ended up having to take that out and put the collector on the turbo, and then bolt the up pipes in. I only tried doing the collector bolted on at first because the previous owner welded the down pipe in but I ended up cutting it and putting an exhaust clamp on

OMG.........LOL.........Loved the How to v/s Reality on getting the turbo off....hahahaha Great vid..

You had my sympathy AND my laughs as I watched the struggle with that turbo removal! I can't thank you enough, as I'm getting ready to do the ebpv delete, pedestal and up pipes in the next week or so. Only difference is I live in WA, so I'll likely be doing them in the rain with no carport. Your grief probably just saved me a couple hours of crying in the rain, so I'm extremely grateful! Great job on the videos, and thanks for the humor along with all the great ideas!

Id rather keep my exhaust brake flap. Its very useful with the manual bypass

That back clamp is the worst! I sprayed mine with some PB Blaster and left it overnight then it came off a lot easier

@FixItNick

4 жыл бұрын

Yea good idea, I should have when had to run to work

@richardmellem3583

4 жыл бұрын

Man... I'm having trouble with the "cold side" down pipe V clamp (why I came to KZread today for answers). I did spray the heck out of it yesterday so maybe today will be better. So the back one is worse... perfect.

When you change your pedestal and got rid of the center and bought that little plug. Does your engine light blink slowly because of the back pressure?

I think I missed the part about what to do with the electrical zignoid at the bottom front of old pedestal?

Any big difference with pedestal compared to stock?

Did you have to change the turbo to the delete one? I just bought the ebpv delete pedestal

Is there a gasket that goes between the turbo and the High Flow Outlet? If so is there a part number?

HELP!!!! Great video...thank you it helped a lot... I took off the I.c.p. to check hpop pressure...3 second crank and it just oozes...but the truck will run🤦...i don't understand...it chugs at idle....new ipr valve....rebuilt ipr....and still...it ran fine with a few hiccups before I rebuilt the ipr....and fuel bowl.... I have no computer only volt meter...12.5v and reversed 12.8v on the ipr.. 8omms ipr.... New icp...great continuity... Not sure of volts...i will check tomorrow but I don't think that matters right now... Any ideas...i have done my research...ive posted on Facebook for help....all I get is get a regular job and pay a mechanic...i own my own company but the truck is broke😭....thank you

"come on, just let go" around 7:05 mark is unaversal. nice work

@LostInPhilly89

4 ай бұрын

*universal

What's that little guy thing called or a part number for it that keeps the check engine light off?

Whats the torque on the ebp delete bolts? And I just wanna say I have learned how to fix the problems I'm having or had with my 02 7.3 its my first diesel and it was never taken care of before I got it

Do you have to pre lube the turbo before reinstalling

Saludos desde México bro 😆

@FixItNick

4 жыл бұрын

Gracias

What are the bolt socket sizes on the turbo pedestal

What did you do with the EPS and tube?

what is the fuel return kit you have there\

Torque specs on bolts man. We need this info

You make all your upgrades easy. Do you hire your self out I have a 2003 7.3 2 wheel drive

@FixItNick

3 жыл бұрын

Thx man and no I only do my own stuff cuz my schedule is crazy with work

Great video, im starting to upgrade both of my 400k mile 7.3, If you install the turbo pedestal will i need a tune?

@FixItNick

4 жыл бұрын

No don’t need a tune for pedestal

What wastegate are you using?

I’m not sure but it looks like there is diesel in your coolant which usually means the injector cups are leaking if I’m not mistaken. I could be wrong though. In any case it’s awesome truck and I’m definitely jealous

@FixItNick

4 жыл бұрын

Diesel in my coolant? Where do you see that?

@jonnysimpson093

4 жыл бұрын

FixItNick When you were moving your coolant tank I thought it looked a little brown. It could’ve just been the camera or anything I suppose but I’ve seen it a couple times. If your coolant has a waxy feel to it then it probably has diesel in it which would probably be the injector cups. Like I said it could’ve just been the camera or the color of your coolant but I suppose it wouldn’t hurt to check

Mods look great and do you have a base line to show the proformence gains my 02 has to be smoged will any of these mods case me a problem

@FixItNick

3 жыл бұрын

None of these mods will effect smog unless deleting cats

Hey bro did you need a special socket to remove those bolts at 10:00? They look like star pattern heads. Also how many did you need to replace them all (if you did)

@FixItNick

4 жыл бұрын

Yea I mentioned how many I replaced I think 12? I bought 3 packs, 8mm socket 12 start point I think

@NoHalfAss

4 жыл бұрын

FixItNick okay I must have just missed it but I’ll check it out again. Thanks bro🤘🏻

@FixItNick

4 жыл бұрын

80HD Projects 11:30 👍

@NoHalfAss

4 жыл бұрын

FixItNick you’re awesome bro!🤘🏻

I might be wrong but I think you forgot to put the new o rings on the bottom of the pedestal.

@FixItNick

2 жыл бұрын

I put them in, otherwise it will be all leaks now

What d you do with the plug that go's to the pedastal will it cause a oil light to come on.

@rickfowler5342

2 жыл бұрын

You just run a resistor across it and it thinks everything is fine.

مرحبا انا استخدم f350 وفجأة تعطلة دواسة الديزل ارجو الرد

When I delete the pedestal do I have to program it or the waste gate

@jasonwilliams2621

Ай бұрын

Was kind of wondering the same. I did the delete previous to seeing this. I put my own 470 ohm resistor in-line to replace the actuator sensor he mentions at mark 8:45 (Riffraff part). Got rid of engine light, but have a choppy de-acceleration after I rev it up. I was wondering if it does need some kind of tuning once the valve is removed. Have you gotten any answers? Thanks

Yo mate what’s happening with the Elenor build?

@FixItNick

4 жыл бұрын

It’s in progress, trying to get enough content for part 8 , really hoping to finish on part 10 would be sweet!!

@garrysutton3229

4 жыл бұрын

FixItNick no worries mate looking forward to it, I’m in Australia 👍

Ok. You’re in CA, you passed smog with everything you have on legally?

@FixItNick

3 жыл бұрын

Yes my truck is fully 100% legal

Lmfao @ how to videos vs reality totally agree bro its never as easy on camera when the camera is rolling the item your trying to remove don't want to cooperate @FixItNick

@FixItNick

4 жыл бұрын

Yup true lol

I have an early 99. Is their much gain in replacing the flap at 8:41?

Why aren't you throw a new compressor wheel in?????

@FixItNick

4 жыл бұрын

I don’t wanna lol

@richardmellem3583

4 жыл бұрын

I was wondering the same thing. Ya got all the work done.

I would keep all the old parts incase you sell the truck and the new owner wants all the oem parts @FixItNick

Why the big deal about Riff Raf ? Did they sponsor you or something?

My truck stalled out on me and it's really hard to crank, when I do get it cranked over it idles for 2 minute then stalls, if I give it gas it chokes like this. kzread.info/dash/bejne/o42nsLGTZ5eYqqg.html

@FixItNick

4 жыл бұрын

It can be few things, what engine codes you got, googled them it will help

@robertdavis3788

4 жыл бұрын

@@FixItNick how do you check the oil pressure going to the injectors if I cant get the code reader to sync up. Im.having a hare.time finding an oil pressure gauge that even goes close to 3k. What's the ball park price o you coming to Savannah GA n help me fix it??