4:34 Edit: The Corralitos actually measures drop from the center of the stem clamping area , so 67mm is already the effective drop (not 52mm)

Great video. Corralitos deserve more attention for both design and low price. I'm 6"3' and use them with a short angled stem to get an upright position. I also put the redshift grips on them, which do get discounted around black Friday. As an older rider with less flexibility, the Corralitos is the only way to actually use the drops with any frequency. Cheers!

@edzeppelin933

2 ай бұрын

These sounds perfect for me. I'm also 6'3" and don't like very deep drops.

@vbnxt

2 ай бұрын

I’m on a 40mm handlebar right now - and reading your comment makes me wanna try out the Corralitos - what size of stem did you end up with?

@jasonshaw2065

2 ай бұрын

@@vbnxt my bike is 61cm frame, so I'm using 60-70mm stems. It's a CX style bike and maybe too aggressive in geometry for me personally. But short stems are fun and cheap to try. Cheers

I went with the Red Shift "kitchen sink" without the front bar. So far so good

I absolutely love the Corralitos and gravel grips for my Gorilla Monsoon. They're very very comfy and incredible for offroad riding.

update, I did a 30 mile gravel race this past weekend and LOVED the kitchen sink bars

The Corralitos bar was a game changer for me coming from MTBing into drop bar bikes.

Great video! I am hesitant to try drop bars again, I just don’t like being bent down that low especially on rough surfaces. I am currently running the Carver MyTi titanium sweep bars and they are perfect for me personally. I have to say, these are the nicest drop bars I’ve ever seen!👍🚴

Ritchey products are really good value. I have their WCS aluminum products on several bikes from handlebar, stem, to wheels.

The Deda Elementi Gera is an other "alt drop bar" worth a look! The corralitos and the Gera would be interesting to compare

Another great review. On my most recent adventure build I was looking for some of the benefits of these alt tape/grip approaches, but in a more traditional tape and gave Ergon’s BT “gravel” tape a try as I’ve always had good experiences with Ergon. For me, this tape delivers the enhanced comfort, without the weight and complexity, these systems are trying to address. A simple and terrific Goldilocks product.

I think the riser of the Alt bars combined with a shorter stem length and perhaps adding some spacers under the stem is the best option for a more comfortable upright position. You can also reduce the width of your bars, personally I have done that with my gravel bikes that are Whiskey Parts Co Spano bars and No 9 12F bars. Your point about preserving or adjusting the rider position is something that cyclists should consider,in addition to the general comfort of an ergonomic multi position bar.

I think one of the most important benefits of the redshift bars actually center around the fact that taller riders often times cannot get bars high enough to ride traditional bars comfortably. Stock bikes always come with woefully short steerer tubes leaving riders like myself with less adjustment options especially when the steerer is carbon. The price is high but its the only bar on the market that helps solve this fitment issue whi h I think justifies the price. only other option is to buy a new fork with an uncut steerer and after install, getting fitted and having the steerer cut you may be out $300-400 or more! I think this is an affordable option all things considered

@jaro6985

2 ай бұрын

There are plenty of other riser road bars.

@mmh7980

Ай бұрын

@@jaro6985 I agree, and they are cheaper too, after all, they are just plastics.

My wife is on a '24 Diverge 56cm and is currently running the saddle about 1/2" too low and installed a 60mm 15* rise stem to try and fit the bike and still have a 2.5" drop from the saddle to the handlebar. While she is very flexible, riding on gravel and fire roads with some trail is not optimal in this position and we're really hoping that the addition of the RedShift TopShelf 2" riser will more give her more comfort and control. *Next stop, custom frame!

I would love the Corralitos bars if they came with flat/ergo tops.

@mattkavanaugh5623

2 ай бұрын

Would the Redshift pads for the handlebar tops work on the Corralitos?

@mmh7980

28 күн бұрын

I have the Corralitos, it's quite cheap and I put some Drop Bar Mods on it that I bought from AliExpress for just over 10€ (exactly the same shit as the 64€ Redshift ones), it's perfect, it has changed my control on the mountain/forest roads to much better. Buying a handlebar for over 160€, no matter how good it is, seems pretty crass to me, like everything Redshift sells.

@mmh7980

28 күн бұрын

@@mattkavanaugh5623 If you have money to flush, yes, if it works.

I will have to disagree with your interpretation of “effective” drop at 4:18 because I believe the baseline position is the hoods and the location of the handlebar mounting point at the stem. I suspect the rise geometry is for people who accidentally cut their steerer tubes too short or do not want a positive flip on their stem.

Great comparison between these two great bars. The Coralitos (46) feels great for me when I use the drop. It feels more relaxed and can easily reach the brake lever. I returned it because I need more rise. I then switch to Kitchensink (50)due to the 20mm rise. It feels good but when on drops, It’s a bit struggle to reach the brake lever. I know it can be adjusted but it” ll compromise the way I want the hood to be positioned. I kept the kitchensink because of the rise, but would like to try the 50 Coralitos. I guess the top shelf maybe the solution, enough rise that will allow me to lower the brake lever.

@vbnxt

2 ай бұрын

The rise is what is making me interested in the top shelf bars. Hope to try out both of these and decide

Pardon the stupid question, but for those Ritchey Foam grips.....do they go over bar tape or the bare bars? On a related topic, I'd love to see you compare all the "drisers"....aka drop bars with rise built in.. like the Specialized Hovers (15mm rise so I'd assume they'd be similar to the Corralitos you just tested).... there's also the surly truck stops (30mm rise) and Soma Condor 2...with 50mm rise.

@TheBikeSauce

2 ай бұрын

The grips go on bare bars, just overlapping a bit of the bar tape for a clean look. Drisers! Ha, good idea. If I accumulate some more bars, maybe I will

I've run the Ritchey Beacons for the last few years, like the shallow drop - the Corralitos go even further, need to compare them. Thanks.

@TheBikeSauce

2 ай бұрын

I like the Beacons a lot, but the flare is a bit tto much for me. Makes the controls a bit awkward from the hoods in my opinion

@br5380

2 ай бұрын

@@TheBikeSauce agree, the flare is a bit "much" but they were the ones with the lowest drops at the time.

As I transition into Cycling in some capacity, I cannot decide if I want to go the Gravel Route, or stick to a Raod setup.. Fire Roads are my preferred track, when able.. I ride MTB now, but find them slow when on road rides, so a drop bar setup is on the horizon.. Deciding on my Chariot has been the hardest part since I am on the outside looking in.. The Gravel Market is booming and I want IN!..

@TheBikeSauce

2 ай бұрын

Haha! Welcome! Now is a very good time as far as choices for consumers. There’s a product for everyone

I want that shirt it's sick!

@TheBikeSauce

2 ай бұрын

Haha old school Zoic

I currently ride 40cm handlebars with a 70mm stem. Will getting a wider handlebar like the corralitos extend my reach? I see it adds 15mm in height and maybe I could shorten my stem to a 60mm - would that make my bike more upright than the same configuration on the Redshift?

Could they not make these bars narrower ?

How does the Corralitos compare to something like the Beacon or the Venturemax in terms of riding experience? Is it a noticeable difference? Also, does the upright position feel noticeably slower? I know you’ve said previously you really like the Venturemax’s, do you think you would keep the Corralitos on long term?

@jasonshaw2065

2 ай бұрын

I've used both and enjoyed both. Difference in reach and drop is noticeable. And I added the redshift grips system. Plus the Corralitos is much cheaper. Cheers

@TheBikeSauce

2 ай бұрын

I do like the Corralitos a lot for a specific bike type - bikepacking / adventure. For more “standard” road / gravel I’ve actually really been liking the Ritchey Butano

do you still have the Diverge?

Excellent video as usual! One question: What is your normal handlebar width, and does it change when using the Corralitos and the Redshift bars? Innoticed this kind of bars are proposed with bigger widths, but i dont really udnerstand why. The tops are supposed to be the same and , if anything, with so much flare, the drops are supposed to be veven wider...

@TheBikeSauce

2 ай бұрын

Good point. I think it’s got something to do with consumer demand - ppl think they want wider bars, so companies respond with wider bars. I normally ride 42cm road and gravel bars with 12-24 degrees of flare. For me, up to 48cm is manageable- anything wider feels too splayed out.

Hey man, just recently found your channel, I really dig your honest and straightforward perspective! Quick question if you don't mind: For context, I'm about the least flexible person on the planet, so I tend to try and be more upright (also long in the torso) I'm running a Diverge and it's just a bit long for me. I pulled my handlebars back with an 80mm stem (stock was 100), which helps a lot, but I feel like I'm still about a centimeter from ideal, have you run shorter than 80mm on a gravel bike, if so how did it feel? I'm worried about affecting steering too much. I ride trails very similar to what it looks like you ride. I also thought about maybe using new handlebars to pull the reach back a bit. Would you say it's better to go the stem route or handlebar route in this type of situation? Guess that wasn't so quick! Anyway, your channel is super helpful, thanks!

@TheBikeSauce

2 ай бұрын

Welcome! I was running a 70mm stem on the diverge for a while and it felt fine. In your case, I might also bring the bars up either by way of headset spacers and the tall duck bill cover or some riser bars - or both.

Can y try put flat. mountain bar on ? or y nev.think ?

Great info

Great video style , I wonder what u guys do with all this review bike parts after ? Can u sell them or have to send them back ? I understand if is a whole bike but something like a handlebar? Specially since the brands are not paying you with money ! Just wondering

@TheBikeSauce

2 ай бұрын

Great question. For components, they are typically donated to the channel. I’ll typically keep parts, give them to friends, or sell 2nd hand after the review period. Bikes are usually (not always) sent back

@orlipacheco

2 ай бұрын

@@TheBikeSauce thanks for the reply and your time , very nice of u to help out others with some components! I recently found your channel and have to said well done content…have an eBay account by any chance? Or Facebook marketplace ect?

I like weird stuff so bought the Corralitos for an older cross bike and bought a Corner Bar knock off for a monster gravel bike. Flat bars have infinitely more control than drop bars, but these newer flared bars actually get really close to flat bar control but still give drop bar feel. I've never been able to use the drops on any drop bar before, so these are kind of a revelation for me.

Seems like a lot of effort to go to to try to have something "drop bar" but not really aerodynamic, which is the main reason to run drop bars. I think a lot of people would be better served with something like a hardtail XC bike -- flat or riser bars and upright position. Those tend to be more affordable than the overhyped gravel category, too.

@jaro6985

2 ай бұрын

Agree, flat bar is the better option. But if your bike already has road shifters, you can't easily switch.

@TheBikeSauce

2 ай бұрын

Yea there’s a pretty large grey area between bikepacking rig and hardtail right now.

@goblinpiper

2 ай бұрын

There are a lot of tourers and chill pace bikepackers who prefer the hand angle of hoods/drops, and the multiple hand positions they offer,to whom aerodynamics come third behind comfort and control on their list of priorities. These seem to be squarely aimed at those riders.

@JayDeBe

2 ай бұрын

Dropper is not just about aero, it's also about a plethora or hand options. Or...you are someone who doesn't have the $$ for a full custom build and has a body size were from the waist down you should be on a 58cm. and waist up a 53-54cm. My wife is on a Diverge 56 and is currently running the saddle about 1/2" too low and installed a 60mm 15* rise stem to try and fit the bike and still have a 2.5" drop from the handlebar to the saddle. While she is very flexible, riding on gravel and fire roads with some trail is not optimal in this position and we're really hoping that the addition of the RedShift TopShelf 2" riser will more give her more comfort and control.