1ST GEN CREW CAB CUMMINS FLATBED BUILD
Автокөліктер мен көлік құралдары
Like/Comment/Subscribe for more Cummins videos!
Follow me on Instagram! @optimalwelding
Check out my website! optimalwelding.com/
nv4500, nv5600, g56, 47re, 48re, 68rfe, 5.9L, 6.7L, 12v, 24v, ve, p7100, vp44, cp3, cold start, turbo, compounds, compressor, charger, rollin coal, smoke, build, mod, diesel, swap, lope, exhaust
Пікірлер: 105
Bad ass bed and pickup 🤘
Nothing sounds better than a 12 V p pump
THE WOOD YOUR USING IS A SOFT WOOD PINE IT WILL ROT QUICKLY ,ITS BEST TO USE A HARD WOOD LIKE ASH ,MAPLE ,OR OAK ITS SPENDY BUT WILL LAST A LOT LONGER
Beautiful, great look and great craftsmanship. Keep up your great work
You have everything down to a science!! Great job!!
Another awesome build. I've got the Evolution brand version of that saw. I love it you can't beat it for cutting plate.
Awesome build thinking about putting one on my 2008 crew cab shorted cummins
the mud flaps are awesome!!!
Awesome... your stuff rocks dude
Sweet Buddy... Awesome job!!
you did an awesome job man !!
So unreal, that truck looks exactly like my truck... and I'm getting ready to put a flat bed on it too lmao
Sweet build as always dude, nice to see the seems hid on the front of the headache rack not that many people have that much attention to detail nowadays
Damn that's nice, you got yourself another subscriber
The deck turned out amazing as usual, we’re those sections of snowmobile track Mitch used for his mud flaps?
Perfect! Great job!
U did an awesome job.looks good
looks sick
need to get rid of my crusty box and get one of these..
nice work guys !
I understand the side effects of welding around it, but for a corrosion resistance finish I think it's hard to beat. Thanks for the reply anyway. Loving your work.
Love the wood on the deck/bed. Not sure why nobody does it. I am going to build a flatbed for my 2002 dodge when we get settled. We just put our house up for sale.( what a pain in the ass. Just got my shop right . Next one will be perfect. I will get plans from you . You do real good work and I actually like every aspect of your build, normally there is something stupid done to screw up the whole thing . You had a good teacher with attention to detail that very few care about now. Thanks for the video . I’ll be in touch .
Man that bed an trk.looks stinkin nice.
Killer truck 👍
Great job !
that is a great looking flat bed you built.
THAT THING IS AWESOME MAN!!!! I WANT IT FOR MY 2ND GEN!!!!
The mud flaps are killer. Why is the headache rack so narrow, though?
looks great! I plan on building something similar for my '90 w350 come fall, already has a flatdeck on it but its a pretty sad excuse for one. Sure wish mine was a crew cab though! Cheers from Alberta!
Would and been badass to use the uprights of the headache rack as stacks
Lookin good bro. Diggin the mudflaps too. Lol
Need to level the truck
looks mad max spec ops
What kinda saw blades in your circular do you prefer? and why?
This is neat
this is an awesome bed you should think about having it mass produced
@drewlawrence8259
5 жыл бұрын
Michael Bradshaw nah, leave quality to him. Mass production would probably take some quality out and it would remove some uniqueness from his badass beds
looks awesome. what kind of saw blade were you using
I know I’m commenting kinda late but I see that you sell all the plans for these. Have you made something for the first gen cummins in a long box with this flat bed design?
SLED TRACK MUD FLAPS FOR THE WIN
info on buying some plans
I'm about to conver my single cab long bed to crew cab short bed any way I could get the measurement from wheel to wheel centers?
400th liked!! And supper dope!!
@spinningedge8790
6 жыл бұрын
neris masiulis I was 666 hmmm
looks good is that the prius crewcab
Is it just me or would that rear piece that you opened the video with make badass running board/rocker guards?
Nice job but no “tie downs” included. 👀
Now you need to build a new cab for it so it all matches LOL
Badass
Really nice work man 👍but think the bed needs new truck lol
Looks good. But why not fix the windshield with all those cracks first... :P
what kind of blade goes on that skill saw?
Can you make a 3D sketch on your website of what a custom wench bumper and offroad long bed would look like on a 2nd gen extended cab 3500 Might have to get them if i like it
Awesome job man, matches the truck great!
Good dude---- But what can you do with it?
Sweet.
Very nice work, but I hope the owner installs the front driveshaft and probably a transfer case soon...
what is the gear ratio in your rear diff?
Hey what series is the Milwaukee saw and blade is that? @optimalwelding?
Nice build as always, hey can you film some footage of your truck with the 12 valve tune in it and some sound and maybe some towing?Just curious how she sounds. I think your bed builds look better than anything that is commercially available out there at least down in Wa. Keep up the awesome vids.
@Cumminslife
6 жыл бұрын
Yeah sure need to retorque my headstuds today so il grab a video on test drive.
What blade do you put in your saw?
I noticed the back of his cab is cracked he is going to wanna fix that sooner then later I had a ext cab do the same and it wrecked the hole cab it got so bad sweet truck though
What the feet of the deck ?
Quality work as always, that Matt black really suits the rest of the truck. Have you ever galvanized one of your decks?
@Cumminslife
6 жыл бұрын
No not sure that I would want to. Not a fan of galvanizing. Try welding around it you'll find out why.
That 1st gen have a 28 inch lift or is that a 45 inch ?
Awesome A 100% better.......I like it...
Cool!
aucken fawsome dude
Hey how is your clutch holding up? I just put a new dual disc clutch in my truck. I'm not sure what I think about it yet.
@Cumminslife
6 жыл бұрын
Yeah I got a southbend dual disk, very happy with it. no issues yet.
@rossdressler6929
6 жыл бұрын
Optimal Welding that's what I got too. Does it rattle at all? Clutch out mine rattles and low rpm. I was expecting some noise getting rid of the dual mass but man its loud.
@Cumminslife
6 жыл бұрын
Yes thats normal. sometimes if you kick clutch at idle it will be quiet but otherwise just ignore it. Put a bigger exhaust on and you wont hear it anymore!!!
@rossdressler6929
6 жыл бұрын
Optimal Welding hahaha. Ok done. Airdogs in the back seat ready to go in. Exhaust next I guess. Thanks man.
What program do you create your drawings/models in? You do some amazing work, inspiring for sure.
@Cumminslife
5 жыл бұрын
Google sketchup!
@Box545x39
5 жыл бұрын
@@Cumminslife Cool, I always wrote that program off, but i'll have to give it a chance.
@Cumminslife
5 жыл бұрын
@@Box545x39 Its more than adequate for this work. We are not designing spaceships
@Box545x39
5 жыл бұрын
@@Cumminslife Not yet! Get some anti gravity tech and suddenly you'll be building flatbeds for spaceships.
Have you built any trays for smaller 4x4s like toyota hilux or equivalent?? Aussie bloke watching the yank tanks here and im like wow you guys can get away with so much more in the way of suspension lifts Here in Australia were only allowed 2" suspension lift anything higher and its gotta have engineering certificates
@Cumminslife
6 жыл бұрын
No haven't built many small trays yet but I do have some good ideas for them. I'm from Australia so very familiar with your road laws there. We can get away with basically anything since vehicles dont require an inspection to be registered for road use. Only time you need inspection is if cop specifically gives you one but still very very easy to pass vs aussie inspections.
Should of integrated a couple of stacks into the bed build .
that bed would bring good money in the north east
@heyyou5189
6 жыл бұрын
Moparkid814 flatbedmytruck.com
@michaelbradshaw2069
5 жыл бұрын
it would here in the rocky mountains as well
@austinkirkham4244
5 жыл бұрын
Truck would bring more money with the og bed then this bed.
u build some nice ass shit
Do you have a number
How much for a deck..I'm in kelowna.99 2500 dodge
@Cumminslife
6 жыл бұрын
Shortbox/longbox? wood/steel deck? Send me an email. Optimalwelding@gmail.com
@Deegz_Nuts
6 жыл бұрын
Optimal Welding short...wood deck
that truck had a dove tail deck with a fifth wheel side skirt tool boxes with stainless trim..............
Hahaha i bought this truck from cariboo few months ago
Bed could b saved give it to somebody who would want and/or need it that would fix it...
@Cumminslife
6 жыл бұрын
If you want it come take it.
@iluvducttape1
6 жыл бұрын
Optimal Welding where are you located? I'm looking for a short bed for my crew cab swap.
@Cumminslife
6 жыл бұрын
Jake Burgess sorry man i scrapped it. Tried to get rid of it for a month but no one wanted it.
DAAMNN that was a straight box??? Dats money in da bank my due ... wha kine uv bizzness you runnin home's ... i mean essay
smh...painting and wearing only a dust mask...
First!