👇WeldTube Store👇 www.weldlife.com

This is LITERALLY the project I'm doing in my Welding II class right now and I'm about to attack this thing with the ferocity of a thousand bulldogs. Thank you, sir.

I’m a full fledged beginner. I love your videos. You make it look so easy. Thanks

@weldtube

3 ай бұрын

You welcome and keep up the effort! Practice, practice and more practice and you will be a full blown welder soon!

@jaylerma7804

3 ай бұрын

@@weldtubepls do 3/8th plate t joint uphill weld 7018

im starting welding school on July 8th. Looked up some videos and yours were very helpful and full of tips i will need when i start!

Bless So glad to see you back. Fr. John. Thanks 🙏

@weldtube

3 ай бұрын

Appreciate you sir!

From Europe: What a great instructor !

I love the videos on the weldtube channel, these videos only further enrich my knowledge in this area of ​​welding

@weldtube

3 ай бұрын

Appreciate you brother!

I never welded before but these videos are super cool and informative, thanks!

These videos are great! I am using this channel as my "KZread Academy" to learn how to weld. Keep em comin!

I gotta get a damn fixture table.. my wife is gonna see the burns on her trunk hood eventually.

Good class rosendo Enjoyed it

Im a welder and love ur videos ,,, ARMY vet. here , keep em comming.😁

@weldtube

3 ай бұрын

Appreciate you and thank you for your service🇺🇸🇺🇸

Thank you for your video it's very helpful

Gr8 KZread explained well nice . Thanks for video.

Very well explained , good video

To beginners, using stick is primarily used for welding pipe, and the majority of the time it is an open root without backing welded with 6010, not 7018. Commonly only time 7018 stick is used in the flat with a backing bar is for structural which is not a common practice to use stick for structural.

Hi Redondo nice informative video learnt a lot thanks

Very good explained.

Great job my young Hombre...great channel also!✔💯

This man is a beast at welding and I have started a groove with backstrap yesterday and my instructor had told me to do the same as he said the only dofference is the machine set to 145 amps we put ours at 90amps

@jjjordan3881

2 ай бұрын

This guy is running an 1/8" rod. Ur rod size will determine ur amps. Position can slightly alter it as well.

Thanks for yet another great video. I am learning a lot. May I ask, why I have never seen an american with a 3m speedglass with a respirator or similar equipment? You guy always seem to use those cheao Homer Simpson ones? In Northern europe everyone has speedglass.

Im welder from zambia I love that

good job my friend❤

You are such a nice and professional instructor brother I learned a from you. However in our country we only have 6013 rods 😊 Take care Keep up the great work

Nice ma man💥

Great work sir 👏 😊

@weldtube

3 ай бұрын

Thank you!

Que excelente canal

Waaasup Rosendo!!!

@weldtube

3 ай бұрын

🤙🤙

First!!! Love my weldtube family!!!

@weldtube

3 ай бұрын

Appreciate you brother!

Had a go on the Welding Simulators! Though I went a little off line in a few tries. I think that a Stick Welder is much easier than the other types as they use electrodes rather than wire. And you can hold the electrode like a pencil too!

I did welding my senior year of high school and used a backing strip I did me root and fills different but I think this way is better it didn’t create a mountain like I did 😂

شكرا لك على كل حال

@weldtube

3 ай бұрын

Anytime!

Do tack placement matter on the back bar ?

really enjoy ur videos man. I'm hoping to start a welding course next month. Just waiting to get accepted onto it and I'll be away. It's basically an intro into the welding business so I will be learning the basics of how to weld Butt, Tee and fillets. I am alw2ays reading up on the difference with certain welding techniques. I have a question for u bro if u have a minute. U have the 1/4" flat bar on the bottom of the 2 3/8" plates but how do u get that off once u have welded them together? I realise ur teaching us these techniques but surely that would not be used in a real world exp? Sorry if I sound stupid with this question but I'm wondering what would be used if u were welding parts together on site?? What is the difference btwn F & G? I see a lot of these letters used for certain type of welds. I see 3F or 6G and things like that. Do u have all this information on ur channel? I'm really new to the channel but I'm enjoying the content very much. I'm learning as I go. I tried welding for the 1st time recently and I like it. If anybody in the comments has any hints or tips for me please drop a reply. It would be very much appreciated. Thanks for the great content man, and thanks in advance to anybody who replies to my questions. I'd appreciate any help u can offer. Trying to learn something new about Welding everyday.. Take it easy.. Salute from Dublin, IRE.

Thank u sir

Excelente información maestro saludos cordiales desde Puerto Rico

@weldtube

3 ай бұрын

Gracias! Saludos desde Texas hasta Puerto Rico!

Got into the habit of adding a little "fling" when i brake the arc on 7018 to flick the molten bead off the rod. Well it flung right into my welding bag.. before i knew it it was bellowing smoke an my assignment packet was toast.

Dozer bucket project .coming up thanks for sharing,,i'll use 6010 and 7018 for cap ..Peace😎

I'm having a little trouble in class with overhead vertical

I remember when I did this in high school I used 6010 for my root pass. However I also wasn’t using a backing strip so it might have been something a bit different I was doing.

Can you make a video on how to use a 6011 to 6G pipe?

Good Good 🎉🎉🎉

In scotland we call two handed welders fishermen.

8 months after…. Welcome back

رائع

There are a lot of different types tests for welding you wouldn't believe I been there

Have you ever demonstrated a T fillet with a backer, suchas would be done on a beam-to-column moment? The backing plate in this vid made me think of it.

@HollywoodF1

6 күн бұрын

If you’re using backers, you’re doing a groove weld. A fillet should be done in a closed angle with no root opening.

@tudyk21

6 күн бұрын

@@HollywoodF1, thanks.

Por favor hagan un videos explicando como hacer correctamente la soldadura 2g con raiz abierta

@weldtube

3 ай бұрын

Lo pondremos en la lista🙏

What about the same weld procedure, but using a SA 200 Lincoln Welding Machine ?

@weldtube

3 ай бұрын

Same technique, you would just set your amperage using the gear and fine current levers on the SA-200.

Can you do a 6010 Uphill T-Joint buddy!!

@weldtube

3 ай бұрын

We will put it on the to do list👍

Saya menyukai video anda

Can you do this same welding style but show us in the vertical position

@CharlesWilson-zh6ug

3 күн бұрын

Iv been welding for 9 months, I'm decent but want to get better.i haven't passed overhead yet either

hey, I need info on how to get my certification in Puerto Rico......any info will help ...thanks

@weldtube

3 ай бұрын

There is a welding school in Arroyo, Puerto Rico called Colegio Mayor De Tecnologia. Reach out to them, they should be able to help you with your welding certification👍

Hey, that's not fair. Our teacher doesn't allow us to grind our welds to correct high spots lol. She's trying to get us used to strict testing rules. We're allowed a wire wheel, though.

👍👍👍👍

Why cover the root gap

❤❤🎉🎉🎉🎉

Never took a plate test with backing strip they were all open root inspector wants to see penatraction ,

@weldtube

3 ай бұрын

Appreciate the feedback brother! This is a beginner test that is taught in high schools and trade schools for people that are just learning👍

@thatguyyouknow5866

3 ай бұрын

What dose the plate having traction have to do with a full penetration weld?

@jaylerma7804

3 ай бұрын

@@weldtubedo vertical uphill 3/8th T joint pls . its a test for me in 2-3 weeks plss give me tips i cant get uphill near perfect

@robertblackman3451

3 ай бұрын

See aws d1.1

@jjjordan3881

2 ай бұрын

U never went to school for welding? Bc u would've done this.

Like ❤🎉

👏👏👏👏💯💯💯💯👏👏👏👏🙏🙏🙏🙏

tig weding sallary

tig welder sallary

ja Vorspannung vergessen . Und das Flacheisen bleibt dran ? Sehr schade . Mangelhaft , setzen .

Why did it take so long

@michaelcrouch5168

13 күн бұрын

Because he's making a video

We want to se penatration

Camera is bad, don’t need constant movement. This ain’t no music video. We’re here for welding, not sound effects, not music, not fancy camera whip pan. This isn’t audience from Mr Beast nor Pewdiepie

@zachlevine1391

Ай бұрын

Don’t be ignorant. Someone is recording, not a fucking tripod. What the fuck do you want to hear the hiss of the rod??? He’s not covering up any important sound. Everyone who clicked this video clicked on it to learn how to weld. The camera man ain’t whipping shit, he’s just recording the bead, and also, it’s still a clear shot. I can still tell what’s going on💀 be better dawg

@HollywoodF1

6 күн бұрын

You don’t have half a million followers. He’s doing something right.

It’s not a 1g weld if it has a backing bar. It’s called a gf, u r out here teaching but don’t even know what the weld is called

@lw8882

Ай бұрын

A gf weld would be grooved fillet. Wat.

Brand new to it.. love your explanations . In school for it now (TSTC) and just bout myself a welder to practice at home. 👍🏿🫡💯