Parts linked in the description of the video!

@RJLM330

20 күн бұрын

My 01 suburbans door handle is white. Is the backup available in that color. If not do you think that the black is paintable

This man is doing god’s work. He had no reason to record this other than because he wanted to help people. Thank you sir.

@smitty70ms1

Жыл бұрын

This man is installing a video camera. Not preaching a religion. Yes he is very helpful. Send him some money.

bro I wish you were located near me. You do fantastic work! So clean, organized, and you really care about quality, well done!! I can't wait to install a double-den touchscreen with backup camera in my 1998 Chevy K1500 truck! 🙂

I never comment on any videos, but this helped alot & i was able to install my reverse camera because of this video. You the goat

This is fantastic, clear an concise install

Excellent! Thank you for such well thought out installation to follow!

Just subscribed! Great video very well detailed and informative, thank you!

@ProvoBeastAudio

2 жыл бұрын

Thanks for the sub!

I installed the tailgate camera to a aftermarket radio on my 2010 Silverado.

Good day, do you recall what fuse you tapped into, because I do not have a test light?

Hey Brother great video. Know you are appreciated for your help and knowledge.

How do you determine which wire is the trigger wire on the radio harness , if the radio bought doesn’t specify. Is it called something else by manufacturers ?

Great video thanks for making. I do have two questions 1. Can I assume the reverse lights are not on all the time I didn't know if power made it to the reverse lights on how this is wired with power on all the time or are the lights on just when put in reverse? 2. Can a switch be added to the white wire, so the camera is not on all the time only when you switch on the switch or when you put in reverse? Thank you again for this great video & your time!!!!

@anthonymolina5321

2 жыл бұрын

I was wondering about the same from your first question.

Great walk through! I noticed that the camera you used didn't show the toe hitch when reversing, can you adjust this camera enough to show the hitch? If not do you have any advice on other cameras that would be capable of this? Thanks!

@ProvoBeastAudio

2 жыл бұрын

Yes, you can adjust the pitch on the camera we used!

Is the camera compatible with a power acoustic radio

Hey I’m installing a Sony xav-ax5000 to my 01 Tahoe LT. In the other video where you installed the head unit and bezel kit someone asked how do they know if they have a factory amp? You said if it doesn’t say Bose you won’t have one. But my Tahoe doesn’t have the Bose package yet I still have a factory 8 inch subwoofer in the rear. So by rights there’s an amp also right? Also, the Sony wiring harness has the super long light green/turquoise wire coming from it, is that a trigger wire for the back up camera if I add it? Appreciate your videos so much man, thank you!!

Very cool. Thank you.

What is the first blue fuse you had in the added circuit before you added the red 10

Great video. Want to add this to my 2004 Yukon cl but the kit on Amazon just shows the plate. Which kit comes with everything like the kit you used?

@ProvoBeastAudio

2 жыл бұрын

Everything we used is linked in the description of the video.

How much a installation like this in this same model cost with the double din and back camera

I wanna buy a 2013 Chevy spark for atleast 6k and I’m worried if they don’t come with a rear view camera

Any reason I wouldn't want to wire the ground on the camera power to the frame?

I am rounding up my accessories to convert my 06 Duramax for a double din radio with a back up camera. I too ordered a licence plate style verses the one they sent with the radio. my only concern & don't seem to see if I need to get an interface connection or not? My truck does not have steering wheel control & when I ordered my harness adapter," Came with the radio install kit " it is a scosche GM05B my truck is not listed on combabilities. Do you have a suggestion as to what plugin I should get? I don't want to pull apart until I have everything to convert. thanks & must add you Rock with all the videos I have viewed on your channel Thank You

@ProvoBeastAudio

2 жыл бұрын

06 still requires a smart harness. You can get around it but will have to manually pull certain connections like accessory, illumination, etc that the smart harness would generally provide. You should be fine if you don't have onstar, steering wheel volume controls, bose, etc.

Why didn’t you just run power from the running lights on the taillights instead of the fuse?

What did running the white power wire from the fuse box to the camera allow you to do? Is this type connection what allows the camera to come on and display with out being in reverse?

@ProvoBeastAudio

2 жыл бұрын

You got it.

One thing not explained is how to mount without pinching the wire. Its a nice frame but has no relief for wire pass through. I cut the plate and ground a slot for the wire in the frame with a die grinder.

Great video, do you have the link for the fuse with wire? Thanks

@ProvoBeastAudio

2 жыл бұрын

amzn.to/3vJtQ2n

Why not use the backup light and ground wire in the trailer harness?? It's right there next to the license plate. Instead of going all the way to the backup light itself.

@sherrickhatcher3811

Жыл бұрын

Because the backup light on the tail light works better with the backup camera

@bwarn

7 ай бұрын

@@sherrickhatcher3811lol it’s the same thing 🤦🏼‍♂️

With it being wired like this, is the camera on at all times? Soon as start the truck the camera is on and stays on. I can switch to the video at anytime on my stereo. I like this option, I just want to make sure it is not hurting anything being on all of the time. Thank you

@ProvoBeastAudio

2 жыл бұрын

Yes, camera will be on when the truck is on. Shouldn't hurt anything, it may reduce the full life of the camera, but for the inexpensive nature of these cameras, i don't see any issue with it.

@tomcrawhorn6282

2 жыл бұрын

@@ProvoBeastAudio Thank you for making the video and for your help. It was great information.

Just pulled the radio out of my ‘07 classic and there’s a second connector! What is that? What am I supposed to do? The crux swrgm-48 has only one connector!

For the accessory white wire can I tap into the wire closer to the fuse box instead of all the way back at the camera?

@ProvoBeastAudio

8 ай бұрын

For reverse trigger wire, sure.

I followed this video to a tee. But the lights that are on my back up camera are on all the time. Does anyone know what I did wrong and what I should fix?

So you tapped into the reverse light for power and also tapped into the fuse box for power ???

@kozmicflush980

4 ай бұрын

Wondering the same.

Hi there, any idea why I have some interference on the screen after installing? I followed the install to a tee, and my screen has some horizontal lines across the center only when the truck is running. In the run ignition position the camera looks perfect though

@ProvoBeastAudio

10 ай бұрын

Sounds like it has noisy 12v signal. You can try a power filter, or swap the camera out to a different brand. amzn.to/3sG49QM

What can I do for the led lights from the camara I don't like them to be on all the time while I'm driving?

@ProvoBeastAudio

2 жыл бұрын

Either wire the camera to only be powered by the reverse light and not accessory, or choose a different camera without LEDs.

Hey! I noticed you have the same Sony unit I just got. I’m having issues with it staying on in my 97 chevy k1500, even when the ignition is switched off. Any tips for this? Or will I have to use the remote it comes with to always turn it off? (Which is less than ideal). Thanks!

@dezdez89

Жыл бұрын

Are you sure the wires are in the right place? They're not always color matched.

@maxwelltremaine7486

Жыл бұрын

@@dezdez89 Turned out to be my worn-down key coming out while in the accessory position. I read elsewhere that this might be the case too, so now I'm just careful to make sure the key gets turned to the correct position before pulling it out.

So I have a 2020 Dodge ram 1500 rear view mirror that has a camera already connected to it. Can you please help me out how to connect it to my 2005 Chevrolet Silverado 1500.

@ProvoBeastAudio

2 жыл бұрын

So you put your 2020 Dodge Ram mirror in your 2005 Silverado? Interesting....

@generalelectric8403

2 жыл бұрын

@@ProvoBeastAudio no sir not yet, I'm having trouble trying to find the power 12v and ground from my old mirror. My 2019 Dodge ram rear view mirror only has 4 wire's, 2 blacks and orange/purple, and pink with yellow stripes.

Hey guys! Chris Fix here.

do all radios have that function to use the camera even if its not in reverse, and does that way you wired it work for the other type or cameras?

@ProvoBeastAudio

2 жыл бұрын

No you will need to check with the radio model you purchase to see if that is a feature (besides just displaying the camera when in reverse). Yes you can wire the camera like we did with most cameras, however we suggest not doing so with cameras that have built in LEDs.

@jesseestrada3401

2 жыл бұрын

@@ProvoBeastAudio thank you l, really appreciate the reply💯💯

My husband just bought me my dream truck. An 04 Chevy 1500 z71 and boy, I cannot see to save my life cause I’m tiny. I’m hoping to install a backup camera cause I’m so use to newer vehicles so I never was forced to just learn 😂

@ProvoBeastAudio

Жыл бұрын

Check out our newer video: kzread.info/dash/bejne/f6iVk9h6ptPHpdY.html

I have an 8ft bed how would I make the video cables connect at the back is there an extension I can get?

@ProvoBeastAudio

Жыл бұрын

Sure: amzn.to/3ZO32ug

I have an 05 Chevy I just installed a backup camera. The grid lines do not follow the wheels like in a newer car. Is that normal? BTW, thanks for the video!

@joeroe2839

2 жыл бұрын

Yea normal

@chriswheeler5150

2 жыл бұрын

Yes newer cars have sensors in the steering wheel

what iis the name of the fuse that you found for accessory? i tried this ab i think i blew something out

@ryunguerrero902

Жыл бұрын

cant type today. i tried this and i think i blew something because the lights only work on passenger side and there's no power to the radio

do most trucks have that hole under the carpet? for example a 2001 ford ranger?

@ProvoBeastAudio

Жыл бұрын

In most cases there are several grommets under the cab of the truck yes.

can any 6.2" radio be installed? what other models can you do?

@ProvoBeastAudio

Жыл бұрын

Any standard double din 4" tall chassis (regardless of screen size) will work great with this kit.

Could I use a tail gate latch mounted camera with this radio? thanks

Cual es el modelo de tu radio? Por favor tengo una silverado 2002 y necesito instalarla gracias

@ProvoBeastAudio

Жыл бұрын

Everything is linked in the description of the video.

@luisnaranjo5778

Жыл бұрын

@@ProvoBeastAudio muchas gracias

Why didn’t you use a wireless model? I use a cheap, wireless one from eBay that has been reliable for the past 5 years!

@ProvoBeastAudio

3 жыл бұрын

I’ve replaced many many wireless units due to failure or poor quality / performance. We always do hard wired cameras.

The license plate frame would be enough probable cause to get pulled over by the po po where I live. I don't need the hassle.

What is the split loom size you're using?

@ProvoBeastAudio

Жыл бұрын

1/4” amzn.to/3Wx80cR

Great video, but the workflow isn't 100% applicable to your stated year range. 95 GMC Sierra doesn't have a wire grommet in the middle of the floor.

That add-a-circuit keeps the led lights on the license plate camera on at all times while the car is running. 🤦‍♂️

@ProvoBeastAudio

Жыл бұрын

They are night vision LEDs, not white LEDs. They don’t illuminate and are not visible to the eye.

I'm bad with wiring I don't think i can tackle this myself

Boston music 🤤🤤

@dereknemeth1297

Жыл бұрын

theyre about as good as Styx. and styx stynx.! lol. (not the guys in the video, but the music!)

thx l

i dont think that camera kit can handle floridas weather man , just saying, but good wring it from the front to the back 👍.

@syxne7419

Жыл бұрын

what would yu recommend

Do you remember how much all of this cost?

@ProvoBeastAudio

Жыл бұрын

It’s all linked in the description for the current cost.