Part II of this Jet Ski can be found here -- kzread.info/dash/bejne/e2enxNKLepe3mrg.html

I hope you see this comment on your older video. I love the 6.0 keep an eye on those injectors and that oil cooler. Also invest in a set of JIS screwdrivers from Amazon. No longer will you strip a JIS screw on a Japanese engine with a Philips head screwdriver. You can always tell that it’s a JIS screw by the little dot on the screw. We’re also waiting on a follow up video on that jet ski from 6 months back. Learning a lot from you! Edit: JIS stands for Japanese industrial standard, it’s there version of the Phillips head.

You got a lot going on out there! It’s hard to do tedious stuff like this when you have distractions and are teaching a helper, you are very patient and kind! Most people I watch in the cussing and throwing tools… It’s nice to see somebody tackle something major and complicated with confidence and Precision this makes me confident in myself that I can do this. I know I could either way, but it’s that certainty that matters. Anybody is capable of doing it, but to have the patience is key

very peaceful lake day, also love all the cute animals

@JohnBullOutdoors

Жыл бұрын

A bat, ants, chicks, deer, dog, and butterflies!!

Kawasaki Engine Power!!! Imortal Engine

Nice job! A lot of people get rid of the oil tank and oil pump. There's a delete kit you can buy for something like $17 on ebay. Has a block off plate for the pump and some caps to block off the oil injection fittings on the intake manifold. Super Clean in the purple bottle is a good degreaser for cleaning up the engine bay.

@krotchlickmeugh627

Жыл бұрын

Not recommended. If it aint broke dont fix it. Oil pumps are reliable. Your jetting after deleting the oil pump isnt. Just replace the lines bleed the system and verify operation.

Nice repair Jet Ski hauls like a new one.

I know this is an old video, but next time, use a small vice grip on those screws. Not from the top like a screwdriver, but from the side as if it were a bolt. Your videos are really good. Something regular people can watch. It's nice to see people actually FIX things instead of just replacing things. Anyone can do that.

The best way to start a 2-stroke like this is by filling a water bottle with premix fuel and poking a small in the lid. Use this to squirt fuel into the carbs to get it running. When using starting fluid as you did the engine is getting no lubrication and you’re running all your bearings dry, or at best with whatever old oil is still in the crankcase. Nice job getting the old ski running. I too don’t like to see these waste away like this one did.

@JohnBullOutdoors

Жыл бұрын

Thanks.That's a great tip.

Never seen ants get in the foam like that. I got the exact same hand pump. Used it in my last video. Good job guys.

@JohnBullOutdoors

Жыл бұрын

Right. They terraformed quite a complex home in that styrofoam.

Very nice job 👍🏻

2nd best video on youtube

I got 2 like this ,thanks for hopefull pointers

sounds great! keep the good work! cheers from Portugal

@JohnBullOutdoors

Жыл бұрын

Thanks!

Great video. Love bringing these skis back to life. Sounded like you were jumping off the jet ski from your running truck. Be careful some jet ski computer (especially seadoo) will get fried if they get more than 12V. It's easy to strip carburetor screws so I usually use a manual impact to start it and a JIS (japanese) screwdriver. Also it's better for ski pour oil gas mix down the carb as opposed to starter fluid spray.

@JohnBullOutdoors

Жыл бұрын

Thanks for the tips.

The oil pouring out of the exhaust is normal from it sitting, mine did the same thing, it will clear out and the smoke will gradually stop. That was my result anyway.

I never had a jet ski before! I’m Alex!

@JohnBullOutdoors

Жыл бұрын

This is my first one too.

its a good practice to delete the crank case drain on these 750 engines , its what the pull knob on the exhaust goes to , the are notorious for hanging open and causing an air leak which causes a lean condition , no good

@JohnBullOutdoors

Жыл бұрын

That is really good to know! Thanks for the tip.

love the 6.0

Way to go!!!!🎉❤

Nice Vidio respect from Indonesia

Гарна робота. Гарні люди.

Merci beaucoup ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

Carb sounds like it's running very rich. For further reference, use OEM keihin parts only

@JohnBullOutdoors

Жыл бұрын

Thanks for the tip.

NEED some motivation, got Sea Doo In back yard has rebuilt practically zero Hours, but repair shop was taken way too long finish, so the previous owner picked brought home. but they kept all Impeller and hardware, so I need it. Maybe this motivates me this spring to fix take on the river.

@JohnBullOutdoors

Жыл бұрын

The intrinsic value of accomplishing a task has always given me great motivation.

what oil did you put in the oil gallon

wow, it's fast

i'm so jealous!

Those ants just got evicted after 28 years

8:30 did it not come with hose clamps? Really a zip tie? I guess for something that small that’s going to be under suction and not pressure. I guess it’s OK if it doesn’t melt… Never seen that done before.

Bom trabalho

Well done man👍👍you have good family👪 how are you??

1996-97 Polaris SLT 700 uses the same carb

Have been watching other videos you need a special set of screwdrivers they are Japanese assemble screwdrivers

I have the same JetSki at home, ran for many years, it’s currently not it not getting fuel, will only run if we put fuel directly in the carburetor, by watching your video it’s interesting, I am thinking I need to rebuild my carburetor and it will run again, as well as to clean the fuel pump in the carburetor, what do you think?

@JohnBullOutdoors

Жыл бұрын

Likely a carb rebuild will get you back on the water.

Where does the air come from to get into the engine?

@JohnSmith-yv6eq

Жыл бұрын

Usually from around the steering head area...the highest point above the water....

Огонь

Sorry but I lost it when bro fell off the trailer

Does the ski have fool filters?

@JetSkiBuyFixPlaySellChannel

Жыл бұрын

The filters are on the end of the pickup tubes.

@krotchlickmeugh627

Жыл бұрын

@@JetSkiBuyFixPlaySellChannel nah. They are inside the carb right where the fuel in nipple meets the "float" needle

Why cannot clean 100% carburetor, old fuel mark inside will be bad, and be careful to œil pump will be same dirty

you got balls putting the jumper cables from your truck battery to that ski. gonna fry the whole ass electrical system

@JohnSmith-yv6eq

Жыл бұрын

Why? Correctly fitted the cables just provide far more grunt to the whole electrical system..and far longer possible cranking time....in short bursts of curse.

It's really cool that you found a bat, but I wouldn't touch it with your bare hands unless you've been vaccinated for rabies. Rabies is very common in the bat population.

That's what she said

I like your life and your family sur you baby gril

Saludos desde chile🇨🇱🇨🇱🇨🇱

At 5:23 minutes still runs😂 do not use starting fluid on a two-stroke please😢

make sure and delete that oil injection. If it fails it will blow your motor.

@JohnBullOutdoors

Жыл бұрын

Yep. That gives me concern. Might do that next.

oil pump delete a must

@JohnSmith-yv6eq

Жыл бұрын

Keep the oil tank/intake line in the oil system clean, plus use top quality oil...the system works well.