I'm pretty sure these 3vze engines are non interference. My belt broke and never hurt any valves.

@gravelyman

3 жыл бұрын

You are right I just googled it. That's a feeling of comfort. I'm glad yours was okay. Thanks for your comment.

@stang6647

3 жыл бұрын

Definitely non interference

@chadenglish6980

3 жыл бұрын

There interference engines and yes won't hurt the valves unless you get it out of time.

@billyingram3492

3 жыл бұрын

@@chadenglish6980 Chad not being rude, but theyre non interference. My timing belt broke and I didn't have one bent valve, or broke pistons.

@alexandrealain

Жыл бұрын

Correct

I deleted all the egr system and all the unessary vacuum lines when I did my head gasket also I took a burr bit opened up the Back of the manifold where they come together at number 6 it really breathes well

@gravelyman

4 ай бұрын

Yes, way too many vacuum lines. Thanks for watching 👍

Mine just went. This car is older than me😂. I found out that it survived 282k miles on the original head gasket.

@gravelyman

Ай бұрын

I guess it was time for the head gasket to go. Good luck,🔧👍

Doing well and thank you for asking! Just got back from a run from Death Valley and realized I got a blown head gasket. Well, at least she got me home! Got 32 yrs out of it and will be replacing it soon.

@gravelyman

3 жыл бұрын

Sorry to hear that. If you ever have any questions feel free to leave them in the comments. Good luck

Great Video! 👍🏻

@gravelyman

3 жыл бұрын

Thank you I'm glad you enjoyed it.

Was told mine was done in 1998 but it's bad again at 155,000 Miles so the dealership said bring it in Friday the 25th and they will tell what they have planned then. I know it should not have went bad that fast again. I'm only the 3rd owner and the original owner bought it new off the dealership in 1993 been in the same state ever since. Beautiful truck and hoping the dealership does the Headgasket again

@gravelyman

2 жыл бұрын

I also have a 1994 I bought in 1999 and the previous owner had the head gaskets done right when it was called back. The truck has 356,000 now and it's still okay. The one in this video was not taking care of at all. Thanks for your comment and Thanks for watching!!!

Be sure and change the nox sensor and the wiring harness, just below the plenum intake.

@gravelyman

Жыл бұрын

Thanks for your input and Thanks for watching 👍

Disculpa configuración de las maneras de la 4x4 de una runner 92

I just did my head gasket. I had a cracked head on the driver side. I pulled a code 71 after putting it back together, fixed my egr hoses and then had a code 25&26. I think I have a bad injector but also read it could be the o2 sensor

@gravelyman

3 жыл бұрын

Does the engine have a miss. If so you should fix that first than clear the codes and see if the light comes back on. I hope this helps you!

@johnb1016

3 жыл бұрын

@@gravelyman I don't think so. It's stuttering when I'm maintaining speed. Especially when driving 55 mph. This is the first time I've ever worked on a car and it's been such a headache

@gravelyman

3 жыл бұрын

Check all the basics first. Make sure the timing belt is on right and so on

@johnb1016

3 жыл бұрын

@@gravelyman we did the timing belt correctly. Had it a TDC and all our marks went on perfectly. I think one of my fuel injectors is faulty. Isn't seating properly and it's got a slight leak

@gravelyman

3 жыл бұрын

@@johnb1016 That's very possible I hope you can figure it out. The best of luck to you!!!

So when reassembling. #1 piston top dead center an cam pulleys should land straight up w the arrows ? Is that correct?

@gravelyman

2 жыл бұрын

Yes. Number 1 is on the passenger side with the piston all the way up. Thanks for watching 👍

Any idea how much parts would be all together?

@gravelyman

2 жыл бұрын

From what I remember it was between 5 and $600 dollars. I hope this helps you and Thanks for watching!

This 1992 3.0 liter engine is not an interference engine .

@gravelyman

2 жыл бұрын

Some of the commenters said it awhile ago. Thank you for your input and Thanks for watching!!!

Pretty sure this is a non intference engine

@gravelyman

3 жыл бұрын

Yes your right someone else said it in the comments. Thanks for your input and watching!!!

@danielcaton716

3 жыл бұрын

@@gravelyman yeah, i just did a valve job on my 93 4runner. You had me worried for a second.

@gravelyman

3 жыл бұрын

@@danielcaton716 I was worried about that for 25 years with my 94 so we don't have to worry anymore!!!

The 3.0 is NOT a interference engine..

@gravelyman

2 жыл бұрын

I always thought it was. Some of the commenters said it's not. Thanks for your input and Thanks for watching!!!

...yep...non....