Thank u so much ur video has legit saved my life

subbed. and lol im in the process of pulling my KA and was looking for a charcoal video. also alot of the forum heads do not give you a good answer right away. i started cracking up cuz thats truth. im posting videos for a log of my swap. feel free to check it out man. hoping to see more on your build as well.

@flossingarage4933

6 жыл бұрын

Misterdude206 dope thanks for the sub glad I could help , and definitely

Thanks for the video!!! And facts 240 forums are savage

Thank you man, god bless you.

Bro, i live in CA. Show me how to connect my canister back.

Good stuff. Subscribed

good video bro. im doing my first ka24de turbo build and i cant seem to get my hear wrapped aroun this car vacuum system thanks for sharing

Much appreciated bro

I just unplugged it from the tube on the gas tank and that was it. I plan on adding some type of breather later on

Thanks.

great video, very true about the forum comment.

If u can get the egr tube off the exhaust, cut the pipe and remove the flare from the nut.. stick a nickel in the exhaust, and screw the nut back on. Same with the aiv. Worked perfect on my truck! Heard the trick on the Local Losers channel

Check valve should be a one way valve... So pressure shouldn't accumulate and cause a crack...

What do you do with the under hose that was connected under the canister?

FYI got an SR so no need for smog even if I was able to legally

For CA smog inspection, i keep all my OEM parts, (except AIV, completely removed and plugged in exhaust side) I isolate and unplug the following vacuum hoses to: EGR/BTV, SCV, and AIV (canadian idle test). I do it for better throttle response. I will only have to replug the EGR/BTV hoses for inspections. Most smog guys look for the EGR setup (vacuum hoses and solenoid), you cannot completely remove it. Your average smog guy doesn’t know anything about SCV and AIV or even coolant lines running Into your throttle body. I find passing smog easier in major cities (Especially if you can knock out ten cars in one hour) than small cities, unless u know someone. Also a less intelligent smog guy is a plus.

Bro, use a Nickel to block the EGR to the Intake. Literally $.05 lol Try to remove the fitting from the exhaust manifold. Otherwise cut off 3-5inches and you can weld, pinch/fold, or put a bolt in the there with HIGH temp copper $8/tube. Just did this on my D21 hit me up.

@jessilooney2444

6 жыл бұрын

does your d21 run good after doing this

@jessilooney2444

6 жыл бұрын

does your d21 run good after doing this

I realize that this video is a couple of years old so I'm not sure if you'll answer this post but I will see :) Do you remember if that canister had a hose attached to the bottom of it?? I've had a 1991 Nissan Stanza KA24E for about 11 years and I have a 1991 Service Manual from Nissan and my canister has a hose on the bottom but I can't find a reference to the hose in the Service Manual (from hell) it runs from the canister to a support by the driver side wheel well to what looks like some kind of air filter? Seems to me that it's restricting air since it's a small nipple covering entire bottom of canister...Thanks Steve

@flossingarage4933

4 жыл бұрын

Steve Armijo so the canister only has 3 on the top, this is actually an 89’ so by 91’ they may have changed but to my knowledge it only has 3 lines on top of the canister it self

i dont see how making the line vent from the front to the rear makes it so it wont explode. you can leave the hard line that goes into the engine bay but some people take it out for a cleaner look

@flossingarage4933

4 жыл бұрын

o Lemurs there’s a check valve in the line and when leaving the check valve it doesn’t allow pressure to escape .

@zxKrookedxz

4 жыл бұрын

@@flossingarage4933 ooooh makes sense now

do i have to extend the line or can i just put a breather on the remaining hose?

@flossingarage4933

4 жыл бұрын

Popa clutch you can put a breather

Let's buy some jack stands!

Can i just put a filter to the hose off the check valve?

@flossingarage4933

6 жыл бұрын

1212harman the hose coming of the tank to the check valve yes .

@jessilooney2444

6 жыл бұрын

+Deviant Gang Frank im doing this to my 1997 nissan hardody 4x4 and was wondering will this effect my gas milage or performace any i know it will throw codes because of it

@flossingarage4933

6 жыл бұрын

Jessi Looney if you are removing the charcoal canister it will not throw a code and will not effect gas mileage . Charcoal canister is only to help fumes from the gas tank and help vent it properly. Everything else that is egr will effect gas Mileage but not drastically maybe 2-3 miles less per gallon to be honest

@flossingarage4933

6 жыл бұрын

Also the egr removals will not throw a code as long as you remove everything

@jessilooney2444

6 жыл бұрын

+Deviant Gang Frank ok thanks i will be removing them then

I can’t pass emissions dangit