One of the most needed videos with ford car's. I always push down on those pull strap clips and use my pick on the bottom at same time . Haven't broken one since. Thanks

@tonyscarcare5657

Жыл бұрын

Thank you!

You make me want to go out and get a classic to tinker on! Definitely choose a Lincoln for sure.

@tonyscarcare5657

Жыл бұрын

They sure are something!

This is great, thank you! I just bought a 1992, and I have this to do on all but the driver's door, since they failed within two weeks of getting the car. 😂 I also had to fix broken plastic screw sockets inside the window switch. I ended up rebuilding them using zip ties melted with an old soldering iron. It took time, but they're now right as rain!

@tonyscarcare5657

Жыл бұрын

Awesome, thank you! You'll get it all fixed.

I totally agree with those little covers tabs always being broken. Subsequent to this happening if no new covers are sourced, one solution is to use some butyl tape ( usually used for holding windshields and glass in place on older cars before urethane became popular ) to hold them on to the screw behind them. Actually works pretty well at keeping them in place .

@tonyscarcare5657

Жыл бұрын

Very true. I like double sticky 3M trim tape as well.

Interesting how the set up in this Town Car is a bit different than the earlier ones. Sad to hear that the regulator has cables! But they are what they are. Thank you for another instructiona video, Tony.

@tonyscarcare5657

Жыл бұрын

You're welcome. Yes, 1990 is when they switched to cables, and they never switched back. I'll stick with my 89.

Tony, Hello very good explanation and video. It appears i need to do all 4 doors this same way on my'90, Town car. Glad i came across your video.. wish me luck.

@tonyscarcare5657

10 ай бұрын

You're welcome, and thank you! I have videos for the front and back. Please subscribe and stay tuned.

@kngjojo6944

4 ай бұрын

Bro me to I’m glad I found this

@tonyscarcare5657

4 ай бұрын

Thank you!

@kngjojo6944

4 ай бұрын

@@tonyscarcare5657 I just bought a 1990 and it’s my first car 😭 only thing wrong with it was windshield wipers needed replacing all 4 window motors and that’s literally it guy ordered the wrong ones for it 65,146 miles I paid 1600 for it owner passed away son was trying to fix what his dad never finished and decided to sell it I’m so happy with my purchase I love old cars ❤️

@tonyscarcare5657

4 ай бұрын

What a great deal! Congratulations!

Pretty informative. Thanks. I have a '96 but don't know if I'm gonna try and tackle that.

@tonyscarcare5657

9 ай бұрын

Thanks! It's pretty much the same thing. There's not much to it.

Love my LTC. If you know, you know. If you don’t know, I can’t explain it to you. 💙

I never knew that this generation used rivets to mount the window motor to the door frame. I know on the 98 and beyond they use torx bolts ( much easier). Just purchased a 97 dirt cheap in perfect condition. Going to fix a few things and flip for profit it needs a window motor in the rear. Glad I watched this first.

@tonyscarcare5657

Жыл бұрын

Thanks. I hope it helped you out.

Very interesting. Boy you sure have more patience than I do. What a job. Not only need patience but to be a contortionist too. You would think the geniuses that design these things would make it easier to access for repairs. Not to mention maybe make the parts out of something like steel that won't predictably fall apart. Sadists.

@tonyscarcare5657

Жыл бұрын

It is pretty bad.

I just bought a 1990 Towncar one owner with 49,600 mile and have to do all the window except drivers window.

@tonyscarcare5657

4 ай бұрын

The driver window has probably already been done.

I really like the way you explain things in depth, however, the camera was too close to the door for me to follow you through the whole process. Other than that, thanks for your videos!

@tonyscarcare5657

Жыл бұрын

Thank you. It's hard without an extra person to hold the camera. I think most people can accomplish it with my teachings. Most people get the job done.

Most people don't push the window up before attempting. Then shatter the window when drilling out the rivets .Always push the window up and tape it up while working

@tonyscarcare5657

Жыл бұрын

For sure!

Another good job!

@tonyscarcare5657

Жыл бұрын

Thanks Ma!

Great video but where's the parts list, links.

@tonyscarcare5657

9 күн бұрын

Thanks! They are all over eBay. 👇 www.ebay.com/itm/372646485348?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=RtXQNpYyTDu&sssrc=4429486&ssuid=RitHQGxcQy2&var=&widget_ver=artemis&media=COPY

What kind of light bulb or size is in the door ? I need one or two

@tonyscarcare5657

2 ай бұрын

194

@jesserosas7758

2 ай бұрын

@@tonyscarcare5657 thank you so much 🙏🏽

@tonyscarcare5657

2 ай бұрын

You're welcome.

👍👍👍👍👍

@tonyscarcare5657

Жыл бұрын

Thanks, buddy!

I was gonna do this myself but after watching this disaster no way.

@tonyscarcare5657

8 ай бұрын

It's given so many other people the confidence to do it themselves and save money.

Great job Tony...whats your hourly rate? Or is charged by the job?

@tonyscarcare5657

4 ай бұрын

Thank you! However, I'm trying to somewhat retire, and that is why I'm doing videos to show people how to do these these themselves. I do charge $75.00 per hour at this time.

@rayspringer8055

4 ай бұрын

@@tonyscarcare5657 I can certainly understand the retirement thing...good luck in all you do Sir...

@tonyscarcare5657

4 ай бұрын

Thank you very much!