Can you share what was done to the suspension? Awesome job!
@christopherhasty8697
4 жыл бұрын
The rear suspension was completely stock except for a spohn torque arm. Front had lakewood 90/10 struts and drag springs.
@ridgeahmed3088
2 жыл бұрын
You prolly dont care but does anybody know a way to log back into an Instagram account? I was stupid lost my account password. I would appreciate any help you can give me.
@stetsonaidan3404
2 жыл бұрын
@Ridge Ahmed instablaster :)
@porterhouse72603 жыл бұрын
1 of only 24 Hard Tops! WTF! where is this car!?
@chrishasty1444
3 жыл бұрын
Haha, I never noticed it looked like a hardtop in this video. It's a T-top car. I found an old set of factory Lexan tops that hadn't been recalled. They are lighter than the glass ones, but hard to find.
@porterhouse7260
2 жыл бұрын
@@chrishasty1444 Dude! Car is insane! Love it!
@brianmathew092 жыл бұрын
great run...can't believe the rear is living thru the launch though?
@chrishasty1444
2 жыл бұрын
It has a Dana 44 rear. (These are rare as hen's teeth, but there are some factory ones out there)
@carrsllccarrillo6507
Жыл бұрын
@chrishasty1444 wow how did you find a Dana 44 out there? Thought they were only found on those "unicorns" 91-92 formula firehawks... Great find though! Those Aussie 9 bolt rear ends wouldn't be able to hold to that kind of launch...iron cones would go poof and turn to dust!
@julio33372 жыл бұрын
Its a 6 banger
@porterhouse7260
2 жыл бұрын
That Car beats Everyone!
@adammoss5759 Жыл бұрын
Did you have to put frame extension's in to stop it from twisting?
@eurocarpleurocarpl2057
Жыл бұрын
Maybe he has sfc
@adammoss5759
Жыл бұрын
@@eurocarpleurocarpl2057 what is SFC
@eurocarpleurocarpl2057
Жыл бұрын
@@adammoss5759 subframe connectors
@adammoss5759
Жыл бұрын
@@eurocarpleurocarpl2057 Thanks I'm looking for a TTA that I plan to tweak so at least I know what I have to do. A friend of mine put a 400 small block in an IROC the first time he launched it he hurt a large cracking sound that was the frame bending. He had to pull the motor and trans out and scrap the body
@jerryreaganjr.98116 жыл бұрын
Nice! What pistons and cam did you use?
@christopherhasty8697
6 жыл бұрын
They're Diamond pistons.
@christopherhasty8697
5 жыл бұрын
Diamond Pistons, and 210/215 full throttle speed cam. Stock rotating assembly otherwise. Stock intake, rockers, throttle body, etc.
@lsxjunkie5 жыл бұрын
Stock heads?
@christopherhasty8697
5 жыл бұрын
They were hand ported
@CobraR1993
2 жыл бұрын
The heads on these cars were different from the turbo regals. They are actually better then what came on the TR.
@lsxjunkie
2 жыл бұрын
@grn61 yes I know. 3.1 fwd heads. I've owned a TTA for 21 years. Mine runs 10.2s on a 6157e turbo and full weight stock wheels
@teehud313 Жыл бұрын
Do you still have it?????
@chrishasty1444
Жыл бұрын
Yes, but I"m probably going to sell it this spring.
@scottsmith65713 жыл бұрын
2004r ? What trans brake I need one
@christopherhasty8697
3 жыл бұрын
Yeah, it's a 2004r. It has a stage-rite brake.
@scottsmith6571
3 жыл бұрын
Nice
@scottsmith6571
3 жыл бұрын
Anyone gone 9’s yet with tta heads ?
@scottsmith6571
3 жыл бұрын
I got a 70gtq need a brake bad
@scottsmith65716 жыл бұрын
What turbo ? I got a 212 212 cam 20 over je pistons all steel mains girdle with a 70gtq trying to bust the 9,s on stock heads
@christopherhasty8697
6 жыл бұрын
A 70gtq is easily enough turbo to go 9's. I'd say the newer billet 67's would easily go mid to high 9's.
@christopherhasty8697
6 жыл бұрын
That's easily enough turbo to run 9's
@scottsmith6571
5 жыл бұрын
Christopher Hasty I have a 6768 Hpq billet on my gn both need tunes the gn has dan strezo heads an cam
@michaelharrison12824 жыл бұрын
Is thar a 2.8?
@christopherhasty8697
4 жыл бұрын
It's a 3.8 Buick V6. It's the original engine for the car, similar to a Grand National.
@raz_nick4048
4 жыл бұрын
@@christopherhasty8697 congrats on owning one of my dream cars! That Buick V6 was meant for the aerodynamic 3rd gen f bodies Hope my L67 SC fiero can come close to your numbers on the black top
Пікірлер: 42
Sick launch.
Love that GM put a Buick Turbo 3.8 in a GTA.
Can you share what was done to the suspension? Awesome job!
@christopherhasty8697
4 жыл бұрын
The rear suspension was completely stock except for a spohn torque arm. Front had lakewood 90/10 struts and drag springs.
@ridgeahmed3088
2 жыл бұрын
You prolly dont care but does anybody know a way to log back into an Instagram account? I was stupid lost my account password. I would appreciate any help you can give me.
@stetsonaidan3404
2 жыл бұрын
@Ridge Ahmed instablaster :)
1 of only 24 Hard Tops! WTF! where is this car!?
@chrishasty1444
3 жыл бұрын
Haha, I never noticed it looked like a hardtop in this video. It's a T-top car. I found an old set of factory Lexan tops that hadn't been recalled. They are lighter than the glass ones, but hard to find.
@porterhouse7260
2 жыл бұрын
@@chrishasty1444 Dude! Car is insane! Love it!
great run...can't believe the rear is living thru the launch though?
@chrishasty1444
2 жыл бұрын
It has a Dana 44 rear. (These are rare as hen's teeth, but there are some factory ones out there)
@carrsllccarrillo6507
Жыл бұрын
@chrishasty1444 wow how did you find a Dana 44 out there? Thought they were only found on those "unicorns" 91-92 formula firehawks... Great find though! Those Aussie 9 bolt rear ends wouldn't be able to hold to that kind of launch...iron cones would go poof and turn to dust!
Its a 6 banger
@porterhouse7260
2 жыл бұрын
That Car beats Everyone!
Did you have to put frame extension's in to stop it from twisting?
@eurocarpleurocarpl2057
Жыл бұрын
Maybe he has sfc
@adammoss5759
Жыл бұрын
@@eurocarpleurocarpl2057 what is SFC
@eurocarpleurocarpl2057
Жыл бұрын
@@adammoss5759 subframe connectors
@adammoss5759
Жыл бұрын
@@eurocarpleurocarpl2057 Thanks I'm looking for a TTA that I plan to tweak so at least I know what I have to do. A friend of mine put a 400 small block in an IROC the first time he launched it he hurt a large cracking sound that was the frame bending. He had to pull the motor and trans out and scrap the body
Nice! What pistons and cam did you use?
@christopherhasty8697
6 жыл бұрын
They're Diamond pistons.
@christopherhasty8697
5 жыл бұрын
Diamond Pistons, and 210/215 full throttle speed cam. Stock rotating assembly otherwise. Stock intake, rockers, throttle body, etc.
Stock heads?
@christopherhasty8697
5 жыл бұрын
They were hand ported
@CobraR1993
2 жыл бұрын
The heads on these cars were different from the turbo regals. They are actually better then what came on the TR.
@lsxjunkie
2 жыл бұрын
@grn61 yes I know. 3.1 fwd heads. I've owned a TTA for 21 years. Mine runs 10.2s on a 6157e turbo and full weight stock wheels
Do you still have it?????
@chrishasty1444
Жыл бұрын
Yes, but I"m probably going to sell it this spring.
2004r ? What trans brake I need one
@christopherhasty8697
3 жыл бұрын
Yeah, it's a 2004r. It has a stage-rite brake.
@scottsmith6571
3 жыл бұрын
Nice
@scottsmith6571
3 жыл бұрын
Anyone gone 9’s yet with tta heads ?
@scottsmith6571
3 жыл бұрын
I got a 70gtq need a brake bad
What turbo ? I got a 212 212 cam 20 over je pistons all steel mains girdle with a 70gtq trying to bust the 9,s on stock heads
@christopherhasty8697
6 жыл бұрын
A 70gtq is easily enough turbo to go 9's. I'd say the newer billet 67's would easily go mid to high 9's.
@christopherhasty8697
6 жыл бұрын
That's easily enough turbo to run 9's
@scottsmith6571
5 жыл бұрын
Christopher Hasty I have a 6768 Hpq billet on my gn both need tunes the gn has dan strezo heads an cam
Is thar a 2.8?
@christopherhasty8697
4 жыл бұрын
It's a 3.8 Buick V6. It's the original engine for the car, similar to a Grand National.
@raz_nick4048
4 жыл бұрын
@@christopherhasty8697 congrats on owning one of my dream cars! That Buick V6 was meant for the aerodynamic 3rd gen f bodies Hope my L67 SC fiero can come close to your numbers on the black top
MICHELTFDasSaAKKJR