1987-1993 Fox Body Mustang 5.0 Resto Cup Holder Console Panel - Install & Review
Buy Now: latemodelres.t...
Shop Interior Paint: latemodelres.t...
Mustang Cup Holder Console Panel Kit.
Revolutionize the interior of your Fox with 5.0 Resto's 1987-1993 Mustang cup holder console panel! From the beginning of the Fox era, Fox owners have had the dilemma of deciding where to place their beverage while driving. Ford didn't include a cup holder anywhere in the interior, so the quick fix has always been to stick the drink between the parking brake handle and the passenger seat. This location may work temporarily for larger drinks but eventually they, along with smaller drinks, tend to break loose while driving causing a spill in your interior. 5.0 Resto's cup holder console panel resolves this issue with a factory style solution!
5.0 Resto Quality.
5.0 Resto products are designed and manufactured with OEM fit and finish in mind, and this cup holder console panel is no exception. With the help of computer-aided design (CAD), this console panel features the factory dimensions and mounting points for a direct replacement installation. Your ashtray (that's usually broken or unused) has been eliminated and replaced with a dual cup holder insert that has a merged center slot to accommodate cups with handles. This insert effortlessly removes from the console to provide quick and easy cleaning. Each cup holder is approximately 1.98" deep and 2.95" wide to accept a variety of different beverages.
Factory Styling Meets Modern Design.
Incorporating a cup holder into the console panel isn't the only change 5.0 Resto made to this panel. To accommodate modern handheld devices, the coin tray has been enlarged to provide a stable location to rest your device while driving. A pre-cut power mirror switch opening allows you to transfer your original switch to the new panel. The provision for the factory e-brake handle is in place so you can easily slide the panel over your parking brake during installation. A new e-brake seal and retainer are included to keep dirt and debris out. Factory style grain and texture are applied to closely match the rest of your interior. The panel is molded in a neutral gray color and will need to be prepped and painted to closely match your Fox interior.
Installation Notes:
- E-brake seal arrives uninstalled. New plastic tabs are molded to the bottom of the panel around the e-brake slot. These tabs must be melted to secure the new e-brake retainer and seal or use a plastic and rubber-safe adhesive.
- The electrical connection for the cigarette lighter will simply remain unplugged.
- Minor filing of the mirror switch opening may be required.
Application: 1987-1993 Mustang
Item # LRS-04490C-K
______________________________________________________
KZread: www.youtube.co...
Facebook: / latemodelresto
Instagram: / latemodelresto
Twitter: / latemodel_resto
Late Model Restoration LMR SVE 5.0Resto ______________________________________________________
Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | lmr.com/page/l...
Пікірлер: 80
FINALLY, ive needed one these for the longest. Ive just been using the space between the passenger seat and e brake to put my cups.
@UFOGHOSTHUNTER
6 жыл бұрын
yep that works for me.
Need ashtray conversion for 92-96/97 f-series trucks
Will the SEM Trim Black paint match close to factory black interior?? Thanks for the videos!!
@latemodelrestoration
2 жыл бұрын
The SEM trim black is intended as a match for the exterior parts of these cars. Here is the link below for all of the proper interior paints/dyes we have to offer here at LMR. - Jay lmr.com/products/79-93-Mustang-Interior-Paint-Spray-Dye
Most people with foxes have aftermarket stereos installed. Those usually have a USB connection that will charge phones.
Finally a spot for my Beer
@newedgestang5.040
6 жыл бұрын
HarleyRider 283 u stupid
@adanmeneses1
6 жыл бұрын
HarleyRider 283 iii
How bout for a 1983 with no cup holders
should have kept the cigar lighter by just making accessible by lifting up the cup holder and making a tab opening for a cord to fit thru.
That piece is about $80 too much. For $160 it should be color dyed already.
@Chad-Dion
6 жыл бұрын
They are betting everyone wants one.. it will go down in price.. I would have got it if it was 100.00 or under but no way for that price.
@justinhadlick8814
5 жыл бұрын
On sale for $89.99 right now
OMG yassssss finally. Looks amazing! It seriously looks OEM! I'm not gonna lie I'm pretty excited to get this. That interior is beautiful by the way. Mine has small stains from multiple drinks falling over cause you know.....no cup holders....yet.
Just another part for me to buy. Great work guys
@latemodelrestoration
6 жыл бұрын
Thanks Sean!
Guess since I have manual mirrors on my 93 LX, Ill just mod a USB power switch into the power mirror location if I get one of these.
That's freaking awesome, can't wait to order one
Can't wait for this!
I understand the manufacturing and design but i agree $160 is too much for me. Not trying to be a jerk but also at that price i would expect it to be pre painted. Its awesome that you guys are doing you're own original parts though this changes the game for all fox body owners and hope you guys keep making more.
I just put 2 cup holders inset in the old coin holder after deleting the arm rest. Works like a charm and I can still charge my phone.
$160 a bit pricey
@badassforever1
6 жыл бұрын
That was where they lost me. But i do understand the cost of making something like this that will sell very little. Keep up the good work guys. Once you have free shipping to Canada you'll have my money!
@03svterminator64
3 жыл бұрын
Damn thing should be $50 max. 160 is retarded
Stopped the video 10 seconds in, to order it!!!! 👍👍👍👍👍👍👍
I'll wait for the price to go down..
I REALLY like this!! Especially since I am in the process of restoring my '93 LX 5.0. However, removing the cig lighter will remove the ability to charge your cell phone. Is there any ideas about developing a new place to mount a power point? Perhaps the cubby hole below the radio?
@Shakerhood69
6 жыл бұрын
I fabbed a console like this about 10 years ago, I moved the cigarette lighter back to where the rectangular section to set the phone, I did stick a dummy plug in it so nothing can drop down in it when not in use.
i could probably 3D print my own design that incorporates the cigarette lighter.
@stew4148
6 жыл бұрын
Why would you use the modern technology of 3d printing to incorporate 1950's technology of a cigarette lighter?
@satanertau2689
5 жыл бұрын
@@stew4148 Easy,charger cord.
@stew4148
5 жыл бұрын
@@satanertau2689 why would you use the modern technology of 3d printing to facilitate the use of 1970's technology of powering something by plugging it into a cigarette lighter? I put a USB power outlet and an AUX input for the stereo in mine. I will now be adding wireless charging since i now have a phone that wireless charges.
Well this is a nice upgrade for a fox but I'm not sure its $160 good.
LMR has updated the console to include dual USB ports. It’s on their website
@latemodelrestoration
5 жыл бұрын
Kevin - The 'updated' console top panel you speak of is manufactured by Daniel Carpenter Restoration. Our panel(the one in this video) is still available. We added the DCR version to our extensive Fox Body line up to offer more selection for the enthusiast. -Landan
This is an amazing product and for sure wanting to get this for my fox, just the only problem is the cup holder is just like the 99 new edge. Where even a small water bottle gets in the way of shifting. Good intentions but placement has more to be desired. If they changed the phone placement and cup holders, maybe a little better. Overall good product
Bout time! So damn cool!
Would love to upgrade to this, but to expensive. Get it to about $80 and you gave a buyer. Especially since it needs to be painted to match.
Can you still use the flip cargo holder and armrest from the stock unit or do you have to delete it to use this?
Would be perfect if you could incorporate a built in usb charger port that converts the cig lighter power to it. Or even wireless charging into the phone holder spot
Landan about how thick is the plastic under the smartphone area? Wondering if a wireless charger pad would work under there hidden out of sight but still able to juice up a phone wirelessly.
@berkstien1289
6 жыл бұрын
Was thinking abour my phone aswell. Maybe a way to hook up a USB port using the old cigarette lighter wires.
Great idea but why not make the coin holder have a wireless charger seeing how you would get rid of the cigarette outlet?
It seems to me all of late model restoration stuff it's just a tad off from the stock stuff. For example how he says closely resembles the factory finish the same problems exist with a lot of their products such as their center caps for the pony Wheels. It says they sit a little past flush but if you're handy with a Dremel tool you can get them to work. So from what I understand the late model restoration stuff isn't quite exactly the way you want it. Including the 6 piece headlight frame kits that some people say you have to drill out to get the adjusting bolts to work
So I see you opted for the small box instead of hanging it from a wire for paint. LMR budget cuts I suppose
@latemodelrestoration
4 жыл бұрын
State of the art painting booth ;)
My interior is gray already, will I still need to repaint it to make it look right, or does it match the original gray color from Ford ?
I thought they had one that used the cigarette lighter power for two USB plugs in front of the cup holders.
Needs a 12v plug in !
Does anyone know where I can get hatchback, hatch area plastic panels? Preferably factory red.
Why does the ETA keep moving further away to order one 😣 do you guys have a no bs date of avalibility?
@latemodelrestoration
6 жыл бұрын
We are currently at the mercy of the vendor but are working hard to get them in as soon as possible. Sorry for the inconvenience David!
What spray can was used ? Sem Landau blk or satin ?
@latemodelrestoration
5 жыл бұрын
This was a non-satin finish used on this application.
@sergiocampos9371
5 жыл бұрын
@@latemodelrestoration thx for the reply
What about 79 to 86?
$160.00? I think that's a little pricey. Not that I'm cheap but I think I'll just live with my infamous broken ash tray until I get it fixed one of these days :-) Besides, when I was driving my '91 GT on a daily basis, I didn't drink or eat in the car. Having cup holders will just tempt somebody to bring a drink in my car and end up spilling the shit everywhere!
It would have been nice if you included USB charging ports that plugged into cigarette lighter connector. I'm buying one anyway since I think I can do that myself. :-)
Now, how will I charge my phone?
@tlamb131
6 жыл бұрын
install a charge pad under where the phone sits!
@noonce
6 жыл бұрын
Evo City hmmm that's a good idea, wireless charging pad, no cables needed to connect your phone. You, sir are a genius!
@gchun21
6 жыл бұрын
You can relocate the cigarette lighter
@alvinpoole2332
6 жыл бұрын
Ooops . . . didn't see this question already here!! just posted it also.
Damn Landon, sold out in one day?
Long overdue
about time
50 dollar discount once a year would be nice
Would sell 3x as many for $80. For $160 bucks,let me introduce you to my cup holder. It's called the area between the passenger seat hinge and the center console.
Am I the only one thinking I will be smacking the cups as I shift lol.
Is he using his phone while driving?
Buzzkill!!!!!! need the cigarette lighter for cell phone charging, someone wasn't thinking, now you're trading one problem for another
@stew4148
6 жыл бұрын
Mount a USB port in it, or run a USB cable up out the side or e-brake slot.
@Odin3v
6 жыл бұрын
For $160, that shit should be included. Its not like only 5 of these will be sold. They are gonna make their money.
Yeah hello! Why do you are show how to remove the cigarette lighter ? Fukin see dah Dee!!! You act so Thorough
2 problems the ridiculous price & the fact there's no plug. Granted easy to install one but why an extra big phone holder if you can't even charge your tunes lol. The price should come with new switch & plug. It's a cool piece but I rather just jam my drink in between the ebrake & seat then pay that much for a cup holder
$160!!!
did this guy take speaking lessons from Joe Kennedy? A little drool on the side lip and u wouldn't know any different
Should have engineered it to swap the hand brake to the driver side while you were designing it. Should have also add USB ports. Most importantly why does LMR still have a stock shifter in that car.