Can't keep repeating this on every video but every video shows special skill, amazing patience to get it right and ends up with a finished standard to amaze. The music's pretty good too!

This car was looking so beautiful! Who could have thought there was such a misery under this orange skin ! Always amazing to see how you can do whatever you want with a sheet of metal ! Delightful to look at your work!

Had to subscribe after watching this astonishing piece of craftsmanship

Before you know it you have built a complete new Manta, love this cars 😊

Just stunning Steve. There are many skills involved in this work, but I am fascinated by how you deal with, and work out all the layers. Simply brilliant. I love how some people still question you, as if you don't know what you are doing, I would advise them not to bother. I can't think of a better or more informative restoration channel than yours. Long may you entertain us.

I love your videos as there is less chat snd more craftsmanship at work. Its truly amazing what you can do and you make it look effortless. Oh, and the music is great. 👍

Reading the comments below Steve, I don't want your head to get to big as it won't fit through though workshop doors lol. However, you have exceeded my expectations on this occasion, and kudos to you on a bloody good job.

Im a diy welder on my car always trying to get more proficient, these videos are truly awesome and inspiring

Steve man you just did it again my friend you just performed a miracle before my very eyes 👀 ❤️. I wish 🤞 I could send a message around the whole world and tell everyone about your channel I just love it so much I love working with metal and especially cars I love figuring out how they are constructed etc. And your channel is the best I have learned things I didn't know was possible. For this I'm forever grateful for the privilege 🙏. To view your channel..take care and God bless

Steve your panel fabrication and rust removal is SUPERB!

Pure skill truly amazing. Proud to be a fellow Yorkshire man

Presented with that scenario, I wouldn't even know where to begin! Brilliant video Steve, no shenanigans, just graft. Love it! 😎

finally someone who think and work as i do. i quit my job though. if it is not fair - then stop bring them money.

Brilliant craftsmanship

wow steve and your boy do amazing work thease cars so deserve it very well done both of you great watch ❤❤

Class act , I'd be super chuffed with that if I was the customer 👏👌🙌👍👍

Nice job. Those Manta's where nice but Opel's always liked the rust when kept outside. I am from Berlin (West) in Germany and my Grandma had a 1.9 litre Ascona and loved it. It was the greatest car in the world for me and I was sure that I am going to get me a Kadett, Manta, Ascona, Rekord, Diplomat or a Admiral, but was'nt sure which one it would be. 😂😊 Brings back memories. Thanks for showing such good work

As always a great watch , top stuff steve.

Expert metal working 😊

Love seeing your work

Fantastic work

Holy Cow Batman thats some lethal corrosion hidden away under the nice paint

Beautiful!

bloody amazing steve !!!

Brilliant work

A beautiful car made good as new by your excellent work.

Absolutely brilliant 👌🏻

Fascinating to watch such awesome and admirable skills, the owners of those classic cars are fortunate to have found YCR 👌

Great work!

As they say in the Glasgow area. Pure Dead Brilliant, nothing more to be said!

Ur 1st class brilliant trades man we could be doing with a man in our town😊

:) watching your video's and craftmanship with the calm background music is very relaxing. Thank you again!

Top stuff 👍

I love the video of your sculpture tacked in place in the end.. Before it is lost in grinding and painting to disappear into the car.. True art there.. A sculpture at work 🙏

Nice watching you work that metal your doing a great job some people don't realise how much work is involved when restoring cars 👍

Great work again Steve👍....and the car looked so nice to start!....Just shows you don't know what lurks beneath! Thankfully you are the guys to save it!

Awesome work!! It’s a pleasure to watch. A true craftsman. 👍👍❤️

Art

Amazing as always. Little tricks of the trade are ace. Welding the metal to a pair of L bars so you could manipulate the correct shape 👌

Super!

Steve that is absolutely amazing fantastic work you make it look so easy and it's anything but love it

top job!

Such a craftsman, amazing work. Beautiful car

Steve u have talent , amazing skills

Brilliant mate. New subscriber. Would love to learn the art of welding myself

Pure engineering artistry.

You make it look so easy.....and i know it is not.....love the channel!

F’ing unreal, Steve. MAGIC

It’s great seeing some of the real basket cases getting transformed,but this seemed like it was a pretty solid car it just shows what can lay behind a few layers!!!

@ToreDL87

Жыл бұрын

Yeah the outside anyone can keep the rust off with good care, it's the moisture starting rust inside the structure, attacking untreated insides. Cars rust from within, and there's no stopping it unless you cut the whole thing up right from the factory, paint it all like YCR does here, then weld back together.

Nice

Brilliant work as always pal, a lot of professional dedication goes into you’re jobs and that I do like and respect. Fantastic 👌

Steve, you are a true professional, love watching you work.

how you fabricate plates and make it look amazing again is beond me !!!

👍👍👍👍👍

Exceptional craftsmanship and expertise. Pleasure to watch.

Work of art ❤

The work you lot do is amazing 👍👍, keep these videos up they are great to watch.

Impressive work, true art!

Love ure work,quite a mission on all those sills,plenty rust!🤔😫😫😫😫👌👊🦾🦾🦾

Absolutely something else👏👏

amazing work

Brilliant 👏💪😎

Amazing! Isn't it?

At the height of my Manta / Cavalier Coupe obsession, I had 14 of them and I’ve done all these complex areas but not as quickly and with that level of perfection and skill. Brings back happy memories. Great work and great videos.

Great work Steve!!! Great Chanel

excellent attention to detail

Nice job Steve 💯

Steve Brilliant craftsman, pleasure to watch you, can i ask one question, do you need to seem weld a rear arch on or are the spot welds enough to then fill over ?

@yorkshirecarrestoration

Жыл бұрын

Hi Jon. Yes deffo seam weld, the spot welds aren't enough. :)

@jonjeff2787

Жыл бұрын

Thanks Steve 😊

I’d love to know the weekly budget for cutting disks 😂

That was a really complex shape inside that panel - nicely done!

Though you did not show it, do you typically cover the inside of the sheet metal you fabricate with the Zinc Alum spray coating before welding them into place. BTW, thanks for showing it is Zinc Alum.

Like the peeling of a rust onion...

Cracking craftsmanship Steve as always. You just make it all look like it's no big deal. Warm regards from Ireland as always.

Ah yes. More YCR ASMR

Fantastic work... but why do yo grind the old metal and then cut it off !

@yorkshirecarrestoration

Жыл бұрын

To make sure there is good metal underneath.

❤❤❤❤

Another great video, if it wasn’t for experts like you and customers with deep pockets these cars would cease to exist.

Breath taking what a beautiful job it's almost a shame to cover up all those inner sill repairs

To think i sold my golf4 because of some rusty spots on the jack points😅 still regret not keeping it. Would have been a prefect first rust repair job. Maybe if i found this channel sooner i would have had the confidence to tackle it. Keep up the awesome work👌

@zedixe13

Жыл бұрын

Still have mine after 19 salty winters in Canada

@TheTechnoaddict

Жыл бұрын

​@@zedixe13 yeah mine was already rusted when i bought it. The tdi engine was a tank. Loved every mile with it.

How is it on the other side?😮

I had the Vauxhall Cavalier 2.0 but with the Opel flat black engine in it, what a machine.

My OCD was kicking in wanting to saturate the remaining sill with ani-corosive stuff. Fantastic to see this gem being repaired by craftsmen.

great

A couple of years ago I was around at a mechanics I've known for nearly 40 years think it was a Fiesta sill he was welding on I mean snotting on , you should be doing this for me , no chance I never did any MOT welding when I was asked to price I left most people shocked LOL . Nice job BTW .

The early mantas would be In my wish list garage

Served my time at a Vauxhall dealers the mk1 Cavalier coupe and hatchback were my 2nd fave cars no 1 was the droop snoots , we had a Datsun dealers at head office loved the big 240 GT's and Z's rot boxes as you know LOL .

Love your videos. It looks like your delaying the inevitable when you grind the rust off those panels. They must be really thin after the grinder. Love watching your craftsmanship. A real art.

You clearly take great pride in, - especially in hidden areas, - to make it look like there never was a rust repair to begin with !

When craftsmanship is acknowledged it bares the truth of many an MOT bodge acknowledged in full!!!!

You sir.. Are an artist! A metal artist. LOL

There you go

The owner must have been gutted at the amount of rot you kept on finding.😢

@loseing1t

8 ай бұрын

Yes at first. I’m so glad I brought it to Steve who uncovered and removed the rust. I have the highest respect for his work.

True welding GOD

Great work again but I am still waiting for months for that Aston Martin - hope that wasn’t just click bait

@yorkshirecarrestoration

Жыл бұрын

Nope not click bait but we have to finish one first before we release another series :)

When did the Mk1 Ford escort come in

@yorkshirecarrestoration

Жыл бұрын

Oh you mean the rs2000 😁

@carcult01

Жыл бұрын

@@yorkshirecarrestoration yeh

@yorkshirecarrestoration

Жыл бұрын

@@carcult01 just :) it's being filmed for full restoration and should start to make an appearance after one of the others are finished :)

It's interesting how the previous repair peeled back around 3:53 was making things worse and the repair patch (by the time you removed it) was promoting rot and become as rotten as the hole it was covering!

Why not prime with zinc primer inside that patch piece before weld? This be corroded after week in UK.

@yorkshirecarrestoration

Жыл бұрын

All of it was zink primed except for the price I did first and the reverse side of that is inside the car so that will be primed with 2k primer so no need to zink prime it. But thank you for your comment.

@MILEVOJVODA

Жыл бұрын

@@yorkshirecarrestoration Ok,i don't see on video you prime first couple small pieces.But i believe you 😁

My friend Mr. Angle Grinder

🤘😎🤘🫖☕️🍰

Cool cars back in the day, I had one. I don’t understand why someone would spend so much money to restore one though.