1976 F150 Crown Vic Swap: Lowering the Rear | Episode 10
Автокөліктер мен көлік құралдары
In this video, I install a 4 inch rear lowering kit in my 1976 Ford F-150. I had a lot of trouble fighting rivets and seized bolts, but I was able to get everything installed eventually!
I'd like to thank the UW Stout Auto Club for all their help.
Thanks for watching!
Joey
Parts:
2 Inch Drop Hangers -eBay (Unbranded)
2 Inch Drop Shackles -eBay (Unbranded)
Leaf Spring Bushing -MOOG K200129
Stock Rear Hanger -Dorman 722-100
Leaf Spring Bolts -Husky Spring SHB91645
Shocks -Gabriel 81242 (I decided not to install them in this video)
Пікірлер: 34
Dope! I'm just starting my 73
You shouldn't have tightened the bolts on the shackles or the front of the leaf untill the truck is sitting on the ground. Push down on the bumper then tighten everything up. Everything is in a bit of a bind when you tighten them without the weight of the truck on them and at the angle they will be sitting at when on the ground. FYI
@minnesotamotors
4 жыл бұрын
Flip Em I retightened the bolts when the truck was on the ground, I just didn’t film it
@danfrederick3172
Жыл бұрын
I’m pretty sure what he’s saying is you should’ve left everything loose until it was on the ground and then tightened it, not tighten it twice
@dentbodyford2170
Жыл бұрын
@@danfrederick3172 That's exactly what I meant 👍
That was some sweet hold your tongue in just the right position action lmao
I love those Milwaukee blades
How did u lower the front ?
So what is the part # for the lowering kit you used? And from where?
if you havnt found a way to lower it more, if you dont plan on hauling anything heavy consider taking a leaf out of the leaf spring pack. softer ride and lower
@minnesotamotors
2 жыл бұрын
I sold it
Hello....are you not going to do the mark 8 rear suspension swap?
@minnesotamotors
4 жыл бұрын
Jerry Jones I’m not sure right now. I still would like to
Do you have some sort of drop in the front to get it to sit that low?
@minnesotamotors
4 жыл бұрын
I have Crown Vic front suspension, with worn out struts
Did the eBay hangers line up with the holes from the old hangers or did you drill new holes. I didn't see you knock out bolts. Thanks, thinking out doing this. I did the shackles and got about the same drop as you.
@minnesotamotors
2 жыл бұрын
I believe they did, can’t remember for sure
@mikehickman3330
2 жыл бұрын
@@minnesotamotors Thanks for getting back to me. That frame is old school steel. It seems like drilling eight hole through that monster would be unforgettable. I don't want to do that.
What diameter bolts are those for the shackles and hangers
@minnesotamotors
4 жыл бұрын
scotty t 9/16 x 4.5 inches
Did you install the shocks?
@minnesotamotors
4 жыл бұрын
ChickenLegMan No I decided not to mess with them
Explorer springs are shorter
We are so spoiled down here in the states that don't have to salt the roads. I have an 87 F350 that drug home for parts that is so clean underneath that it looks like its one year old.
Id get yourself some Por15 and coat the rust on anything you plan on saving on that truck.
is that a 65 impala in the garage 🤔
@minnesotamotors
4 жыл бұрын
Sshy shy Yep!
What's going on with that Impala??
@minnesotamotors
3 жыл бұрын
Tacroll Fives It belongs to my car club
I think you didn’t get all 4 inches bro bc you put the shackles on the wrong whole
@anthonyortega68
3 жыл бұрын
Hole ^***
Dude, you need more power tools.
Why didn't you replace your bushings?
@austinlane5533
6 ай бұрын
Good luck with that. If they aren't trash, I wouldn't create a whole different a×× whoopin with getting those out and new in.