1970 Chevy C10 LS 5 Lug Axle Swap from 6 Lug Using CPP Rear Axle Conversion Kit from Summit Racing
Автокөліктер мен көлік құралдары
Swapping a 1970 C10 rear axle from a 6 lug to a 5 lug using the CPP axle kit.
Parts used:
CPP 5-lug Swap Axles
www.summitracing.com/parts/cl...
Axle Bearings
shop.advanceautoparts.com/p/d...
Axle Seals
shop.advanceautoparts.com/p/n...
Axle Bearing Puller - Rented from Advance Auto Parts
shop.advanceautoparts.com/p/p...
Пікірлер: 34
Nice video man , hyped ! gonna start wrenching on my 68 Stepside project soon
Dude, nice video! Best one on a C10 5 lug conversion I have seen yet!
Great Video! Love the C10 !
What’s size break drums are those
What differential fluid did you use? i have a 1968 c10 with a 12 bolt and im not sure which to het
@RustnAway
3 жыл бұрын
80w90. Need between 2-3 quarts
@c10marco68
3 жыл бұрын
@@RustnAway thank you so much!
@RustnAway
3 жыл бұрын
Anytime. Thanks for watching!
If i alteady have 5 lug axles do i need the kit or will any 5 chevy t lug work
@RustnAway
3 жыл бұрын
Depends on the axle length and splines. If it’s a 5-lug from another c10, most will work but you’ll need to double check. Some axles (71+ I believe) have a different measurement that pre-71.
Did u have to drill your axles for your wheel studs
@RustnAway
4 жыл бұрын
No the CPP kit includes the new axles already set up for the five lug. You can get the kit with or without the brake drums too (depending on what you are running out back).
@vagabond3045
4 жыл бұрын
I bought some aftermarket axles and I put them in and the 1/2 stud fits Until it hits the knurled part i tried 2 different size knurled studs and still don’t fit I have never had a problem in the past installing wheel studs before
Were you able to reuse the original center pin?
@RustnAway
3 жыл бұрын
Yup. Works just fine.
@JuanRamirez-bl3dp
3 жыл бұрын
Guess I put the clips in bad or havent pulled the axles out enough. Ok, I'll give it another shot.
@RustnAway
3 жыл бұрын
Just pull them out a hair and it should still go in and the c-clips will hold.
Will this kit work on a c20?
@RustnAway
3 жыл бұрын
I don’t see why not.
Are the axles the same length?
@RustnAway
3 жыл бұрын
Yes but make sure you measure yours. They vary depending on the year of the truck.
@patrickgodoy6059
3 жыл бұрын
@@RustnAway I have a 63 C-10
So basically it’s just pull out the old axles and replace them with the 5 lug axles ?
@RustnAway
3 жыл бұрын
Yup it’s pretty straight forward. Obviously need to add new fluid and re-do the brakes and gaskets.
@gustavoreynoso6849
3 жыл бұрын
Hot Rod And Street Truck Garage thanks man your video helped a lot
@RustnAway
3 жыл бұрын
Thanks for watching! Appreciate it.
@carlosdeleon467
2 жыл бұрын
Does that kit works on a 66 C10 ??
@RustnAway
2 жыл бұрын
Yes the kit I got works for 65-69
Why would you want to go from 6 lug to 5?....
@RustnAway
2 жыл бұрын
A lot of wheel options in 5 lug compared to 6 lug.
@ubmixinb360
2 жыл бұрын
@@RustnAway Not from where I'm standing..... 6 lug from 16" to 22" factory.... slap them on from any gm big truck... And they are plug and play.....My 07 Burb has had 4 sets of 17" and 18" wheels.......Just got a set of 20's from a GMC Denali....with tires...$500.....Those rims were all 2015-2021......
@augustoescobar50
Жыл бұрын
@@ubmixinb360 yes but all those are ugly. Torq thrust 2s, rallys even centerlines look better than all those and list goes on
Dude. You so needed a wire wheel